Firefox

For a 732 Error.... Step 1: Verify Internet Connectivity of Internet Explorer: Backup the Registry: Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so. Please download ERUNT from here ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed. Double click on erunt-setup.exe to Install ERUNT by following the prompts. Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish. Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process. Choose a location for the backup. Note: the default location is C:\Windows\ERDNT which is acceptable. [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe Once you've done your backup, please do the following: Click on Start and select Run In the Run box copy and paste the text in the following code box exactly as written and press Enter or click on OK:REG ADD "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f Try updating again and if it does not work then please proceed to Step 2 Step 2: Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs: For Windows XP: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For Windows Vista or Windows 7: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 64 bit versions of Windows Vista or Windows 7: C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\SysWoW64\drivers\mbamswissarmy.sys Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude them from it as well The FAQ contains examples of setting file exclusions for some known AV products. Now try updating Malwarebytes' Anti-Malware once more and if it does not work then please proceed to Step 3 Step 3: Verify Your Internet Connection Settings: Open Internet Explorer Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other internet browser [*]Click on Tools at the top and select Internet Options Note: If you do not see Tools, press the Alt key on your keyboard and it will show up [*]Click on the Connections tab [*]Click on the LAN settings button [*]Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it [*]Under Proxy server make sure that the box next to Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). is not checked and if it is, click the box next to it to uncheck it [*]Click on the OK button to close the Local Area Network (LAN) Settings window [*]Click on the OK button to close the Internet Options window [*]Try updating Malwarebytes' Anti-Malware again to see if it now works correctly This Link shows how to do the last steps -

Unfortune to say, Good luck with that, I dont really think they will do anything about it...

More than likely it is a virus. There is no reason for UPS to send you an email with an attachment. Delete the email in question and do not open the attachment.

Hello cpaesq, and welcome to Malwarebytes.org For Error 730: Unable to load the database. Please reinstall the application. It requires you to reinstall the application, but being that you have an infection, then the malware you have is preventing the successful installation of Malwarebytes.... Therefore please follow the instructions below to get you fixed up.... We don't work on Malware removal in the general forums. Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here. One of the expert helpers there will give you one-on-one assistance when one becomes available. After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someone has replied to your post. Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

First off, you should not run to AV programs active at the same time, it will cause issues. Viper and MSE would fit that category. I also have heard that Viper and MBAM do not play together very well, but if you enter the right exceptions into it to exclude the MBAM files you should be able to get it to work. Here are the exceptions: Please exclude the following files from your antivirus: Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude them from it as well For Windows XP: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 32 bit versions Windows Vista or Windows 7: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 64 bit versions of Windows Vista or Windows 7: C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\SysWoW64\drivers\mbamswissarmy.sys Please post back and let us know how it went.

Hello jmbreese66, and welcome to Malwarebytes.org Indeed by looking at that log, I can tell you are infected.... Please follow the instructions below to get you fixed up. We don't work on Malware removal in the general forums. Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here. One of the expert helpers there will give you one-on-one assistance when one becomes available. After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someone has replied to your post. Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

Some AV have conflicts, to avoid the conflicts you can exclude the processes that MBAM uses from your AV to avoid it. See below: Please exclude the following files from your antivirus: Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude them from it as well For Windows XP: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 32 bit versions Windows Vista or Windows 7: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 64 bit versions of Windows Vista or Windows 7: C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\SysWoW64\drivers\mbamswissarmy.sys Please post back and let us know how it went.

More than likely you only have to do the third part. Like listed below: (Malwarebytes is well worth the price, it is by far the best tool I have run in a long time) First you must ensure that the infection has not altered your Internet settings - Please do these steps in Internet Explorer (even if IE is not your default browser ) - - The 732 error is usually due to your Internet Explorer being altered by an infection - Try these steps first please - Verify Your Internet Connection Settings: Open Internet Explorer Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other Internet browser [*]Click on Tools at the top and select Internet Options Note: If you do not see Tools, press the Alt key on your keyboard and it will show up [*]Click on the Connections tab [*]Click on the LAN settings button [*]Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it [*]Under Proxy server make sure that the box next to Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). is not checked and if it is, click the box next to it to un-check it [*]Click on the OK button to close the Local Area Network (LAN) Settings window [*]Click on the OK button to close the Internet Options window [*]Try updating Malwarebytes' Anti-Malware again to see if it now works correctly -THIS will show you the last steps - Thank You - If you still have problems post back and I will post the complete version for the 732 Error fix - Also if you like you can have a look HERE under Malware Removal Guides and Self Help Guides and locate the infection you have for some guides that may help you remove your infection.

having bittorrent running will cause the IP blocker to popup as it may be blocking sites that it is trying to connect to that are not safe. As for the cookies causing this I am not sure, unless the cookies were trying to get updated but could not cause they were being blocked.

You can try booting into safe mode and login with an admin account and see if you can browse to that folder so you can delete its contents. Before trying to browse to that folder make sure your folder options are set so you can see them. In folder options: Click on View Tab Under Hidden Files and Folders: Click on Show hidden files and folders Also (just temporary) Uncheck the Hide protected operating system files. Once you are done make sure you check this back. Now browse to that folder location and delete the files you wish to delete.

Hello brickman, and welcome to Malwarebytes.org You may try following this FAQ to see if you can get it to work and clean your computer located RIGHT HERE If that does not work then follow the below instructions..... We don't work on Malware removal in the general forums. Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here. One of the expert helpers there will give you one-on-one assistance when one becomes available. After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someone has replied to your post. Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

you may have some malware that is lurking in your system that has disabled your Malwarebytes.... Try doing the steps listed in this FAQ and see if it helps you. mbam will not install - Code 2 error, mbam.exe not found Please go here: http://forums.malwarebytes.org/index.php?showtopic=29028 And see if that might help get Malwarebytes running for you

It is quite possible that when you installed McAfee with the Firewall that comes with it, it put that entry into your registry to disable the Windows firewall so that they do not conflict with each other. you can go to the Quarantine tab and find that entry and restore it to see if you McAfee firewall goes back to working as normal. If it does not you could always run another scan and remove it once again. If that does not work, there is one more thing we could try.... Let us know

mountaintree16 was right on the money.... When you open IE fresh start, you will get two iexplorer.exe in task manager. (they are for each tab that opens up)

Hello RshaoKh, and welcome to Malwarebytes..... Have you updated MBAM and ran a quick scan? Did it find anything? Do you use P2P software? (like bittorrent, limewire, etc) IP Protection Explained: The IP Protection Module is explained in full details in the FAQ and you can read about it by CLICKING HERE

Hello roberto25, and welcome to Malwarebytes.org We don't work on Malware removal in the general forums. Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here. One of the expert helpers there will give you one-on-one assistance when one becomes available. After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someone has replied to your post. Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

For a 732 Error.... Step 1: Verify Internet Connectivity of Internet Explorer: Backup the Registry: Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so. Please download ERUNT from here ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed. Double click on erunt-setup.exe to Install ERUNT by following the prompts. Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish. Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process. Choose a location for the backup. Note: the default location is C:\Windows\ERDNT which is acceptable. [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe Once you've done your backup, please do the following: Click on Start and select Run In the Run box copy and paste the text in the following code box exactly as written and press Enter or click on OK:REG ADD "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f Try updating again and if it does not work then please proceed to Step 2 Step 2: Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs: For Windows XP: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For Windows Vista or Windows 7: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 64 bit versions of Windows Vista or Windows 7: C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\SysWoW64\drivers\mbamswissarmy.sys Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude them from it as well The FAQ contains examples of setting file exclusions for some known AV products. Now try updating Malwarebytes' Anti-Malware once more and if it does not work then please proceed to Step 3 Step 3: Verify Your Internet Connection Settings: Open Internet Explorer Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other internet browser [*]Click on Tools at the top and select Internet Options Note: If you do not see Tools, press the Alt key on your keyboard and it will show up [*]Click on the Connections tab [*]Click on the LAN settings button [*]Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it [*]Under Proxy server make sure that the box next to Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). is not checked and if it is, click the box next to it to uncheck it [*]Click on the OK button to close the Local Area Network (LAN) Settings window [*]Click on the OK button to close the Internet Options window [*]Try updating Malwarebytes' Anti-Malware again to see if it now works correctly This Link shows how to do the last steps -

Boy you just like to put a lot of little hints out there dont you.... thats great!

For a 732 Error.... Step 1: Verify Internet Connectivity of Internet Explorer: Backup the Registry: Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so. Please download ERUNT from here ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed. Double click on erunt-setup.exe to Install ERUNT by following the prompts. Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish. Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process. Choose a location for the backup. Note: the default location is C:\Windows\ERDNT which is acceptable. [*]Make sure that at least the first two check boxes are selected. [*]Click on OK [*]Then click on YES to create the folder. Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe Once you've done your backup, please do the following: Click on Start and select Run In the Run box copy and paste the text in the following code box exactly as written and press Enter or click on OK:REG ADD "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f Try updating again and if it does not work then please proceed to Step 2 Step 2: Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs: For Windows XP: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For Windows Vista or Windows 7: C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\System32\drivers\mbamswissarmy.sys For 64 bit versions of Windows Vista or Windows 7: C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref C:\Windows\System32\drivers\mbam.sys C:\Windows\SysWoW64\drivers\mbamswissarmy.sys Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude them from it as well The FAQ contains examples of setting file exclusions for some known AV products. Now try updating Malwarebytes' Anti-Malware once more and if it does not work then please proceed to Step 3 Step 3: Verify Your Internet Connection Settings: Open Internet Explorer Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other internet browser [*]Click on Tools at the top and select Internet Options Note: If you do not see Tools, press the Alt key on your keyboard and it will show up [*]Click on the Connections tab [*]Click on the LAN settings button [*]Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it [*]Under Proxy server make sure that the box next to Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). is not checked and if it is, click the box next to it to uncheck it [*]Click on the OK button to close the Local Area Network (LAN) Settings window [*]Click on the OK button to close the Internet Options window [*]Try updating Malwarebytes' Anti-Malware again to see if it now works correctly This Link shows how to do the last steps -

I have seen this happen, but not on a dell, it was an Acer and a Toshiba.... They have a service that protects the Hard drive in case you drop the laptop. On those two computers, when I disabled that service all was good. May be worth looking into that.... it was something like Acer Hard Drive Protection....

Yes we have seen this happen with a computer that is infected.... Glad you figured it out.... We usually have them follow these steps: mbam will not install - Code 2 error, mbam.exe not found Please go here: http://forums.malwarebytes.org/index.php?showtopic=29028 And see if that might help get Malwarebytes running for you

If you are logged in as an administrator you should be able to access: C:\Documents and settings\Wife's name\local settings\temporary internet files\Content.IE5 Unless the profile is set to private.... (she may have done it without realizing it). You could always log in as her, and run CCleaner and it will delete those.

Sorry been out of the loop for a few day.... Since you have received these errors: error 0142 error code 2000 0142 hard drive 1 self test unsuccessful status 79 sorry to say, no matter if you format that drive and reinstall everything, you will encounter the error again, as that hard drive is failing. You will have to buy a new hard drive and reinstall everything. Save that bad drive and get you a tool like THIS ONE and after you restore you pc with a new drive, attach that bad drive to this device and plug it into your usb port so that you can see if you can recover any of your data.