Jump to content

Need help with removing potentially camouflaged malware in my system

usagitun
 Share

Recommended Posts

usagitun

usagitun

Posted
Posted

This is my first time posting here, forgive my typos, english isn't my first language

I recently noticed that my accounts got hacked, and all of them were logged in my infected computer. A few days ago, I tried scanning the PC with Malwarebytes, and removed the threats that were identified by the program, however, my accounts kept getting hacked even though I got 2FA on. I don't really doubt it's a virus, but not even other antiviruses identified it, almost like it's super "camouflaged"... I would really appreciate any help, specially because this worries me a lot. 

Link to post
Share on other sites
Porthos

Porthos

Posted
Posted

@usagitun

Although I will not be directly assisting you, a malware removal expert will be along to assist after you do the following.

Let's get the info to get the process started. Be aware it will take many steps and scans to fully remove malware.

Please respond to all future instructions from your helper in a timely manner.

Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process

Then follow each step in the order provided. Unless otherwise asked, please attach all logs

 

Please make the following system changes: Please pay close attention the the instructions in all of the following links.

  • If you have not done so already - Enable System Protection and create a NEW System Restore Point
  • Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the downloads are completed
  • Disable-Fast-Startup <<<<< Important.
  • Show-Hidden-Folders-Files-Extensions

Please run the following scans: Please pay close attention the the instructions in all of the following links.

  1. Click the following link and run a  Scan with AdwCleaner
  2. Click the following link and run a  Scan with Malwarebytes
       RESTART the computer <<<<< Important.
  3. Click the following link and run a  Scan with Farbar Recovery Scan Tool 

Example image of where to click to attach files when posting your reply

image.thumb.png.e208c182ff570799c53bcf57

Then be patient for the next expert to take your case. <<<<< Important.

 

Thank you

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Using P2P Torrenting greatly increases the risk of infection to your computer and data.

C:\Users\gatin\Downloads\utorrent_installer.exe 

 

Please temporarily disable the real-time protection from Avast antivirus. Then run the following.

 

 

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool 

https://devbuilds.s.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 


Select the  image.png  Windows Key and R Key together, the "Run" box should open.

user posted image

Drag and Drop KVRT.exe into the Run Box.

user posted image

C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box.

image.png

add -dontencrypt   Note the space between KVRT.exe and -dontencrypt

C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.
 
image.png


That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file.

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr
Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply.

To start the scan select OK in the "Run" box.

A EULA window will open, tick all confirmation boxes then select "Accept"

image.png

In the new window select "Change Parameters"

image.png

In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start...

user posted image

When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue"

user posted image

When complete, or if nothing was found select "Close"

image.png

Attach the report information as previously instructed...
 
Thank you
 
 

 

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Thank you for the log, there were no detections

Please run the following

 

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get started. 
  • When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
  • On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
  • When prompted for scan type, Click on the Full Scan button
  • Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
  • Have patience.  The entire process may take a few hours or more.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log and give it a name and location you remember.
  • If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
  • Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Yes, please try the following @usagitun

 

 

Dr.Web CureIt!

Please download the Dr.Web CureIt! anti-virus utility
https://free.drweb.com/

 

You will need to send them an email to obtain a link to download the scanner, please do so

  • The downloaded file will normally have a unique name such as:  q7a9tr4p.exe
  • Close all open applications and locate the downloaded file and double-click to run it
  • The program will take a moment to launch and bring up the License and Update screen
  • Place a check mark to agree to the terms and then click on the Continue button
  • Click the underlined link Select objects for scanning
  • On the top left click the Scanning objects that should automatically check all objects
  • Click the small wrench and make sure there is a check on Automatically apply actions to threats
  • Then click the large button on bottom right Start scanning
  • Once the scan has completed there will be a link named Open report click that and a log named cureit.log should open in Notepad
  • The log is saved in the folder named Doctor Web in the top of your user profile folders
  • Please attach that log on your next reply

 

 

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Great, that program also found no issues.

Please RESTART the computer one more time and then get me a new, fresh set of logs.

 

Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/


Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/


Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/


Scan with Malwarebytes
https://forums.malwarebytes.com/topic/304827-scan-with-malwarebytes/

 

 

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Thank you for the logs, please run the following FIX @usagitun

 

 

Please run the following fix

 

NOTE: Please read all of the information below before running this fix.

  • NOTICE: This script was written specifically for this user, for use on this particular machine.
  • Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRSTEnglish.exe

Save the attached file:  FIXLIST.TXT to this folder C:\Users\gatin\OneDrive\Área de Trabalho\

NOTE. It's important that both files, FRSTEnglish.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

  1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
  2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed.
                Also, make sure you know the passwords for all websites as cookies may possibly be removed in some cases, but not all cases.
  3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

After the FIX above completes and the computer has restarted, please do the following

 

Please Uninstall, Update, or otherwise address the following as appropriate for your computer.

 

Please uninstall the following

---------------------------- [ UnwantedApps ] -----------------------------
Adobe AIR v.50.2.4.1 Warning! This software is no longer supported. Please uninstall it.
Driver Booster 11 v.11.4.0 Warning! Suspected demo version of anti-spyware, driver updater or optimizer.


RESTART the computer one more time and check for Windows Updates and install any found

Let me know how the computer is running now and if there are still any signs of infection or any other unresolved issues

Thank you

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

That looks good overall. @usagitun

Please go ahead and restart the computer one more time and run the following again. It's late for me so I'll check back on you again tomorrow. 

 

 

Let's get the info to get the process started. Be aware it will take many steps and scans to fully remove malware.

Please respond to all future instructions from your helper in a timely manner.

 

Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process

Then follow each step in the order provided. Unless otherwise asked, please attach all logs

 

Please make the following system changes:  Please pay close attention the the instructions in all of the following links.

  • If you have not done so already - Enable System Protection and create a NEW System Restore Point
  • Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the downloads are completed
  • Disable-Fast-Startup
  • Show-Hidden-Folders-Files-Extensions

Please run the following scans:  Please pay close attention the the instructions in all of the following links.

  1. Click the following link and run a  Scan with AdwCleaner
  2. Click the following link and run a  Scan with Malwarebytes 
       RESTART the computer
  3. Click the following link and run a  Scan with Farbar Recovery Scan Tool 
     

Example image of where to click to attach files when posting your reply

image.thumb.png.e208c182ff570799c53bcf57

 

Thank you

 

Link to post
Share on other sites
usagitun

usagitun

Posted
  • Author
Posted

Hey, thanks for helping me. I decided to do a factory reset in my PC in the end, so I think I'm pretty much fine by now. But I'm really grateful for your help, I hope I didn't waste much of your time during this...

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well.

 

We're glad that we were able to assist you.

 

The following information will help you to keep your computer and data safer as well as improve your overall privacy

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/780233/best-password-manager/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download     https://patchmypc.com/about-us
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Cybersecurity basics & protection
Everything you need to know about cybercrime
https://www.malwarebytes.com/cybersecurity

 

Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.