Andy2No2 Posted May 30 ID:1639948 Share Posted May 30 Thanks. It turns out that's the same as Scaling - mine shows 150%, but does have more options - I could increase it to 200%, which would no doubt cause problems with more software :) I'm used to 150% though, after using it for several years. " 5. To Select a DPI Size - a) Dot a size that you want for the Display DPI size. (See the screenshot above.) •Smaller - 100% = 96 DPI (Pixels/Dots Per Inch) •Medium - 125% = 120 DPI (Pixels/Dots Per Inch) •Larger - 150% = 144 DPI (Pixels/Dots Per Inch) " It's a shame they force us to log out, to apply the change. It makes it a lot less useful since Windows has no concept of picking up where it left off. It's only a little bit better than having to reboot. Link to post Share on other sites More sharing options...
John L. Galt Posted May 30 ID:1639954 Share Posted May 30 (edited) Another possibility would be to use be to adjust the compatibility for the the MB app, though whether that would be for C:\Program Files\Malwarebytes\Anti-Malware\Malwarebytes.exe or C:\Program Files\Malwarebytes\Anti-Malware\MBAM.exe or both, as in this tutorial: https://www.sevenforums.com/tutorials/316-compatibility-mode.html I suspect that this is where @ChuckOP was also headed based upon his request. Edited May 30 by John L. Galt Link to post Share on other sites More sharing options...
Andy2No2 Posted July 17 ID:1649506 Share Posted July 17 Just to update this, I had previously tried the Properties->Compatibility settings, for MalwareBytes and other things that don't cope with 720p and 150% scaling, but I never found any settings that helped. That's still the case, so I gave up and bought a 1080p monitor. I also gave up leaving MalwareBytes running, because the scans were grinding my PC to a halt and I couldn't find a way to stop them happening automatically. Newer is not always better, but that's another topic. Link to post Share on other sites More sharing options...
Porthos Posted July 17 ID:1649509 Share Posted July 17 2 minutes ago, Andy2No2 said: because the scans were grinding my PC to a halt and I couldn't find a way to stop them happening automatically. Did you turn this setting on? Are you running full scans instead of the recommended threat scans? Link to post Share on other sites More sharing options...
Porthos Posted July 17 ID:1649510 Share Posted July 17 6 minutes ago, Andy2No2 said: I couldn't find a way to stop them happening automatically. Link to post Share on other sites More sharing options...
Andy2No2 Posted July 17 ID:1649511 Share Posted July 17 @Porthos I had it set to prioritize system, yes. It didn't seem to help. Once it started scanning, it was difficult to make any use of my PC, which as a Core i7. Where is the setting for full vs threat scans? I can't even find the Scheduler tab you're showing, in this version. The new UI is unintuitive and quite poor, IMO. Link to post Share on other sites More sharing options...
Porthos Posted July 17 ID:1649512 Share Posted July 17 3 minutes ago, Andy2No2 said: Where is the setting for full vs threat scans? This button starts a threat scan Malwarebytes Version 5 "aka" Desktop Security user guide Click here for the scan schedule 1 Link to post Share on other sites More sharing options...
Andy2No2 Posted July 17 ID:1649513 Share Posted July 17 (edited) I see. Thanks for that. So, I have to press the button I expect to start a scan (which it does, immediately) to be able to get to the relevant Scanner settings, even though there's a three dots menu with Settings, right next to the Scan button. That makes no sense at all. As I said, it's unintuitive. In fact, that's just plain wrong. The old UI was much better and I didn't need to ask anyone how to use it. Someone should revisit this part of the UI. It's ridiculous. Edited July 17 by Andy2No2 Link to post Share on other sites More sharing options...
Porthos Posted July 17 ID:1649514 Share Posted July 17 3 minutes ago, Andy2No2 said: The old UI was much better and I didn't need to ask anyone how to use it. That is why there is a help section. Link to post Share on other sites More sharing options...
Andy2No2 Posted July 17 ID:1649546 Share Posted July 17 (edited) If the new UI made sense, there would be no need to refer to the help section for such a basic feature. Bear in mind, I used MBAM for well over a decade. The UI should make perfect sense to me, and I should have no trouble finding things in it. Edited July 17 by Andy2No2 Link to post Share on other sites More sharing options...
Porthos Posted July 17 ID:1649547 Share Posted July 17 4 minutes ago, Andy2No2 said: Bear in mind, I used MBAM for well over a decade. I used Malwarebytes software before it became Malwarebytes. But I understand your view. 1 Link to post Share on other sites More sharing options...
Staff ChuckOp Posted July 17 Staff ID:1649630 Share Posted July 17 15 hours ago, Andy2No2 said: I see. Thanks for that. So, I have to press the button I expect to start a scan (which it does, immediately) to be able to get to the relevant Scanner settings, even though there's a three dots menu with Settings, right next to the Scan button. That makes no sense at all. As I said, it's unintuitive. In fact, that's just plain wrong. The old UI was much better and I didn't need to ask anyone how to use it. Someone should revisit this part of the UI. It's ridiculous. There is a large "Settings" button to the left. You do not have to hit the three-dot menu. The three-dot menu is there to provide context-appropriate shortcuts. The user interface provides multiple paths - explore a little and see what works best for you. For example, to adjust scan settings you can: Click Settings Scan and detections Or Click the three-dot menu, and click Settings Same for Advanced scans: Click anywhere in the Scan card to bring up the scanner detail page Click Advanced scans Or Click the three-dot menu and choose Advanced Scan Link to post Share on other sites More sharing options...
f14tomcat Posted July 17 Author ID:1649638 Share Posted July 17 (edited) @Andy2No2 Your issue of the system being bogged down on scans is unusual. There may be something not so obvious that is causing your problem. I suggest you download and run their Support Tool, follow the instructions to gather the logs, and attach them to this post (or start another). The MBAM Gurus can analyze the data for possible issues and advise. Edited July 17 by AdvancedSetup Removed link to tool Link to post Share on other sites More sharing options...
Root Admin AdvancedSetup Posted July 17 Root Admin ID:1649649 Share Posted July 17 To begin, please do the following so that we may take a closer look at your installation for troubleshooting: NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system. Download the Malwarebytes Support Tool In your Downloads folder, open the mb-support-x.x.x.xxx.exe file In the User Account Control pop-up window, click Yes to continue the installation Run the MBST Support Tool In the left navigation pane of the Malwarebytes Support Tool, click Advanced In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply Thank you Link to post Share on other sites More sharing options...
Andy2No2 Posted July 19 ID:1649894 Share Posted July 19 On 7/17/2024 at 7:49 PM, f14tomcat said: @Andy2No2 Your issue of the system being bogged down on scans is unusual. There may be something not so obvious that is causing your problem. I can't know for certain, but I suspect it has to do with the fact that this PC has Windows 7, and most of the focus is on supporting Win 10 or later. I do own a PC with Win 10, and a second license, but 10 still irritates me so much that i rarely use it. I got it so I could use software that won't run on Win 7, but I rarely feel the need. That PC is currently turned off, and has the ethernet cable removed, after having Copilot forced on it without being asked, which I struggled to remove again. Link to post Share on other sites More sharing options...
Andy2No2 Posted July 19 ID:1649895 Share Posted July 19 On 7/17/2024 at 8:45 PM, AdvancedSetup said: In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply Thanks for the offer of help. but I'm not comfortable uploading logs of a scan of the contents of my PC. I never really felt the need for daily scans and I cant actually remember Malwarebytes finding something that wasn't a false positive, so I'm fine with just doing manual scans, usually just of software I download, immediately after downloading it. I don't mind the time taken to do a scan when I initiated it myself. Being able to turn off automatic scans resolves it well enough, for me. 1 Link to post Share on other sites More sharing options...
Andy2No2 Posted July 19 ID:1649897 Share Posted July 19 On 7/17/2024 at 7:09 PM, ChuckOp said: There is a large "Settings" button to the left. You do not have to hit the three-dot menu. The three-dot menu is there to provide context-appropriate shortcuts. The user interface provides multiple paths - explore a little and see what works best for you. For example, to adjust scan settings you can: Click Settings Scan and detections Or Click the three-dot menu, and click Settings Same for Advanced scans: Click anywhere in the Scan card to bring up the scanner detail page Click Advanced scans Or Click the three-dot menu and choose Advanced Scan As far as I can see, these methods do not provide a route to the scan scheduler, which is what I was looking for. I now see that I can click on the word Scanner, from the dashboard, rather than having to click on Scan, but it's not clear that that's an option, from the way the UI is designed. Being able to do it once you know how is all very well, but it's not intuitive. It's not at all intuitive that I'm looking for a setting but it's not in the Settings menu either. Link to post Share on other sites More sharing options...
Root Admin AdvancedSetup Posted July 19 Root Admin ID:1649917 Share Posted July 19 Okay, thank you for the feedback 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now