Jump to content

i have a virus


Recommended Posts

Hello @doom and :welcome::

While you are waiting for the next qualified/approved malware removal expert helper to weigh in on your topic, and even though you may have run the following Malwarebytes utility, please carefully follow these instructions:

  1. Download the Malwarebytes Support Tool.
  2. In your Downloads folder, open the mb-support-x.x.x.xxx.exe file.
  3. In the User Account Control (UAC) pop-up window, click Yes to continue the installation.
  4. Run the MBST Support Tool.
  5. In the left navigation pane of the Malwarebytes Support Tool, click Advanced.
  6. In the Advanced Options, click only Gather Logs. A status diagram displays the tool is Getting logs from your computer.
  7. A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file in your next reply to this topic.

For the short time between when you post the diagnostic logs, and when your helper weighs in, please take no further self-directed remedial actions that will invalidate the diagnostic logs you will have sent.

Thank you.

Link to post
Share on other sites

  • Root Admin

Hello  and  :welcome:     @doom

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow all steps in the provided order and post back all requested logs
  • Please attach all log files to your post, unless otherwise requested
  • Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
  • Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim. Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections. If there are any on the system you should uninstall them before we proceed.
  • Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
  • If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

Please temporarily disable the real-time protection from your Norton 360 and run the following.

 

Please run the following steps and post back the logs as an attachment when ready.
Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans are completed.
Temporarily disable Microsoft SmartScreen to download software below if needed. Make sure to turn it back on once the scans are completed.
If you still have trouble downloading the software please click on Reveal Hidden Contents below for examples of how to allow the download.

 

Spoiler
 
 
 
 
Spoiler

When downloading with some browsers you may see a different style of screens that may block FRST from downloading. The program is safe and used hundreds of times a week by many users.

Example of Microsoft Edge blocking the download

image.png

image.png

image.png

 



STEP 01

  • If you already have Malwarebytes installed then open Malwarebytes and click on the Scan button. It will automatically check for updates and run a Threat Scan.
  • If you don't have Malwarebytes installed yet please download it from here and install it.
  • Once installed then open Malwarebytes and select Scan and let it run.
  • Once the scan is completed make sure you have it quarantine any detections it finds.
  • If no detections were found click on the Save results drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If there were detections then once the quarantine has completed click on the View report button, Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If the computer restarted to quarantine you can access the logs from the Detection History, then the History tab. Highlight the most recent scan and double-click to open it. Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If Malwarebytes won't run then please skip to the next step and let me know in your next reply that the scanner would not run.

STEP 02

Please download AdwCleaner by Malwarebytes and save the file to your Desktop.

  • Double-click to run the program
  • Accept the End User License Agreement.
  • Wait until the database is updated.
  • Click Scan Now.
  • When finished, if items are found please click Quarantine.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Attach or Copy its content into your next reply.

RESTART THE COMPUTER Before running Step 3

STEP 03
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens, click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a check mark here each time
  • Please attach the Additions.txt log to your reply as well.
  • On your next reply, you should be attaching frst.txt and additions.txt to your post, every time.

 

Thanks

Link to post
Share on other sites

  • Root Admin

Please temporarily disable your Norton 360 antivirus real-time protection. Then run the following. Once completed, please re-enable your Norton 360 AV

 

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get started. 
  • When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
  • On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
  • When prompted for scan type, Click on the Full Scan button
  • Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
  • Have patience.  The entire process may take a few hours or more.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log and give it a name and location you remember.
  • If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
  • Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

Link to post
Share on other sites

  • Root Admin

It still should have loaded to run, but okay. Let's try a different one

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 


Select the  image.png  Windows Key and R Key together, the "Run" box should open.

user posted image

Drag and Drop KVRT.exe into the Run Box.

user posted image

C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box.

image.png

add -dontencrypt   Note the space between KVRT.exe and -dontencrypt

C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.
 
image.png


That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file.

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr
Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply.

To start the scan select OK in the "Run" box.

A EULA window will open, tick all confirmation boxes then select "Accept"

image.png

In the new window select "Change Parameters"

image.png

In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start...

user posted image

When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue"

user posted image

When complete, or if nothing was found select "Close"

image.png

Attach the report information as previously instructed...
 
Thank you
 
 

 

 

Link to post
Share on other sites

  • Root Admin

If you follow the instructions it will be in Plain English. If you missed a step it will be encrypted and not usable.

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr
Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply.

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.