Root Admin RubbeR DuckY Posted July 28, 2007 Root Admin ID:6705 Share Posted July 28, 2007 Version 0.59 has been released. Please view the installer prompts for the change log. Link to post Share on other sites More sharing options...
JeanInMontana Posted July 28, 2007 ID:6706 Share Posted July 28, 2007 Quick scan 3 min 48 sec! Everything ran good, gave me the options for icons etc. Small bug with version still showing 58. Link to post Share on other sites More sharing options...
mrgigabyte Posted July 28, 2007 ID:6708 Share Posted July 28, 2007 hi everyone i have a question about the betas i notice that in the ad and remove there are two Anti-Malware entries i was wondering if that should be also i am testing on two machines and have not had any problems until this so this is because of what i did on my second machine i did uninstalled the first entry and then when i try to open beta i had a run time error and something else so i dont remember what it was so unstall everything and reinstall 59 and could not get it to start so i did a restore and then a update and have 59 back and running find again so going to not touch it again and the is two entries again in ad and remove in control panel i be checking to see what you think thanks mrgigabyte Link to post Share on other sites More sharing options...
JeanInMontana Posted July 28, 2007 ID:6709 Share Posted July 28, 2007 I just checked I have two also, only one has a version number and that is 58, it doesn't have the program icon just a installer type icon, the other instance of the program has the icon. The size of the two is different too. The MBAM icon is an older version dated 7/18.Wow just uninstalled the older version and everything is gone as far as an installed program. No icons, nothing but an uninstaller in the start menu, in the program file there is an older installer and an uninstaller, in A/R there is version 58 showing.I used the installer dated 7/24 in the program folder and it installed version 59? Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 28, 2007 Author Root Admin ID:6712 Share Posted July 28, 2007 The problem is the different uninstallers I am using/trying out. Best bet is to uninstall everything and reinstall everything until the program is out of beta. Link to post Share on other sites More sharing options...
lurkingatu2 Posted July 28, 2007 ID:6713 Share Posted July 28, 2007 install went good and quick scan found nothing but version 0.58 the schelduling was on and this version 0.59 it's off Link to post Share on other sites More sharing options...
Walker Posted July 28, 2007 ID:6714 Share Posted July 28, 2007 Install went fine always like to see a changelog also option not to create icons works great.As above i saw that scheduling is greyed out, and i did get an runtime error.I also can't get full scan to work, error message Please select at least one drive (all internal harddrives are selected) Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 28, 2007 Author Root Admin ID:6715 Share Posted July 28, 2007 The hard drive form has a confirmed bug. What type of runtime error did you get? The scheduling is greyed out on purpose. The monitor will be doing the scheduling. Link to post Share on other sites More sharing options...
mrgigabyte Posted July 28, 2007 ID:6716 Share Posted July 28, 2007 i dont remeber what run time i had but when i uninstall everything and try to put the 59 back in it would not work so i unstalled everything put in the first beta then update and everything great again have beta 59 i still have the two things in ad remove hope that helps a little Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 28, 2007 Author Root Admin ID:6718 Share Posted July 28, 2007 Hmm.. they are both still there.. I will look. Link to post Share on other sites More sharing options...
lurkingatu2 Posted July 28, 2007 ID:6728 Share Posted July 28, 2007 in add/remove programs i had 2 mbam so i took out mbam-setup and uninstalled both in add/remove programs and used ccleaner to cleanup then reinstalled from mbam-setup and i get a runtime error when i try to open mbam and it woint open the runtime error says vbaccelerator sgrid 11 control runtime error "0" and then mbam could not load language error and mbam woint start can i use the first mbam-setup (0.54) i got and update from there thanks Link to post Share on other sites More sharing options...
Walker Posted July 28, 2007 ID:6731 Share Posted July 28, 2007 Sorry I clicked the runtime error message away too fast to read it and i can't reproduce it.I have asked this before but didn't get an answer,In full scan can you add an option to only scan harddrives because now it offers to scan all drives. 3 harddrives and 2 diskdrives (the 2 diskdrives are always empty). Link to post Share on other sites More sharing options...
Hardhead Posted July 28, 2007 ID:6732 Share Posted July 28, 2007 Can you not uncheck the harddrives that are selected? Link to post Share on other sites More sharing options...
lurkingatu2 Posted July 28, 2007 ID:6733 Share Posted July 28, 2007 i uninstalled mbam 0.59 and went back to mbam 0.54 and updated and i get the same runtime error and mbam woin't open Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 28, 2007 Author Root Admin ID:6734 Share Posted July 28, 2007 This is a confirmed bug and will be fixed by tonight =) Link to post Share on other sites More sharing options...
lurkingatu2 Posted July 28, 2007 ID:6735 Share Posted July 28, 2007 cents i can't open mbam to update do i go back to mbam 0.54 and update when the update comes out or is there a link some where to download the new one thanks Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 28, 2007 Author Root Admin ID:6736 Share Posted July 28, 2007 Ah, very true. Open command prompt and run this.regsvr32 "C:\Program Files\Malwarebytes' Anti-Malware\ssubtmr6.dll" Link to post Share on other sites More sharing options...
Walker Posted July 28, 2007 ID:6737 Share Posted July 28, 2007 Ofcourse i can uncheck the drives i do not want to scan but in my case it is only two.However when i insert my cardreader it are six drives to exclude, i can imagine that there are people with much more non fixed drives.Excample:1 Floppy Disk2 DVD Player3 DVD Recorder4 Virtual Drive5,6,7,8,etc cardreader drivesWhich all have to be excluded from the scan so it can be a lot of work if you have to do it every time. Link to post Share on other sites More sharing options...
sho-dan Posted July 29, 2007 ID:6738 Share Posted July 29, 2007 HelloSorry for the delayI was still getting the Avtivir tmps and I did the Q&D steps, but every time AV was updated the tmps continue to show up. The ver59 Quick scan time was 1min.36secs. So I treated MBAM as a finish product and ran ATF-Cleaner first (I do this with all scanners I use and is part of my CS in HJT log cleaning.) and no tmps to found and the ver59 Quick scan time was 54secs. woohoo very fastThe problem is the different uninstallers I am using/trying out. Best bet is to uninstall everything and reinstall everything until the program is out of betaI follow what you posted and I got the Runtime Error 0 = Could not load English language. Did a total removal via ADD/Remove,Win.Explorer and Search and then reinstalled ver57, then updated to ver59. Ran the Qscan as stated above, no problems at all. btw I have'nt any problems with the Abort scan function.In ver59 I get a Please select at least one drive error trying to run the Full Scan now. Did the uncheck and checked drive processe and still a no go.cheers Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted July 29, 2007 Author Root Admin ID:6739 Share Posted July 29, 2007 Most of the bugs will be worked out by tonight. Link to post Share on other sites More sharing options...
Recommended Posts