Jump to content

Command Prompt? popping up


Recommended Posts

Hello, within the past week or two, I've had a weird issue where what looks like the command prompt window pops up for half a second (too briefly for me to be able to confirm that it was actually command prompt) and then disappears. This happens maybe twice an hour or so. It does this on top of whatever else I was doing, so it will minimize programs that were at the forefront and whatnot. I've run Malwarebytes and my antivirus and nothing comes up. I've also looked into Windows event viewer and don't see evidence of anything abnormal happening, and am unable to even find an event that would match the time-stamps of these occurrences. Windows 10, happened both before and after the recent creator update. Any guidance would be appreciated. Thanks!

Link to post
Share on other sites

HelloJurgioslakiv and welcome to Malwarebytes,

My screen name is kevinf80, i`m here to help clean up your system. Make sure to run all scans from accounts with Administrator status, continue as follows please:

Anyone other than the original starter of this thread please DO NOT follow the instructions and advice posted as replies here, my help and advice is NOT related to your system and will probably cause more harm than good...

Change the download folder setting in the Default Browser only. so all of the tools we may use are saved to the Desktop:

user posted imageGoogle Chrome - Click the "Customize and control Google Chrome" button in the upper right-corner of the browser. user posted image
Choose Settings. at the bottom of the screen click the
"Show advanced settings..." link. Scroll down to find the Downloads section and click the Change... button. Select your desktop and click OK.

user posted imageMozilla Firefox - Click the "Open Menu" button in the upper right-corner of the browser. user posted image Choose Options. In the downloads section, click the Browse button, click on the Desktop folder and the click the "Select Folder" button. Click OK to get out of the Options menu.

user posted imageInternet Explorer - Click the Tools menu in the upper right-corner of the browser. user posted image Select View downloads. Select the Options link in the lower left of the window. Click Browse and select the Desktop and then choose the Select Folder button. Click OK to get out of the download options screen and then click Close to get out of the View Downloads screen.
NOTE: IE8 Does not support changing download locations in this manner. You will need to download the tool(s) to the default folder, usually Downloads, then copy them to the desktop.

user posted imageChange default download folder location in Edge -Boot to a user account with admin status, select start > file explorer > right click on "Downloads" folder and select "Properties"

In the new window select "Location" tab > clear the text field box and type in or copy/paste %userprofile%\Desktop > select "Apply" then "OK"

Be aware you are not changing the Browser download folder location, you are changing the user’s download directory location.....

Next,

Follow the instructions in the following link to show hidden files:

http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/

Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

Be aware FRST must be run from an account with Administrator status...
 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Let me see those logs...

Thank you,

Kevin..
Link to post
Share on other sites

Thanks for those logs, continue with the following:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Please download Zemana AntiMalware and save it to your Desktop.
 
  • Install the program and once the installation is complete it will start automatically.
  • Without changing any options, press Scan to begin.
  • After the short scan is finished, if threats are detected press Next to remove them.
    Note: If restart is required to finish the cleaning process, you should click Reboot. If reboot isn't required, please re-boot your computer manually.
     
  • Open Zemana AntiMalware again.
  • Click on user posted image icon and double click the latest report.
  • Now click File > Save As and choose your Desktop before pressing Save.
  • Attach saved report in your next message.


Next,

Download AdwCleaner by Xplode onto your Desktop.

Or from this Mirror
 
  • Double click on Adwcleaner.exe to run the tool
  • Click on the Scan in the Actions box
  • Please wait fot the scan to finish..
  • When "Waiting for action.Please uncheck elements you want to keep" shows in top line..
  • Click on the Cleaning box.
  • Next click OK on the "Closing Programs" pop up box.
  • Click OK on the Information box & again OK to allow the necessary reboot
  • After restart the AdwCleaner(C*)-Notepad log will appear, please copy/paste it in your next reply. Where * is the number relative to list of scans completed...


Next,

user posted imageEmsisoft Emergency Kit
  • Click Here to download Emsisoft Emergency Kit. The download will automatically start after a moment.
  • Save EmsisoftEmergencyKit.exe to your Desktop.
  • Double click on EmsisoftEmergencyKit.exe (Windows Vista/7/8/10 users: Accept UAC warning if it is enabled). A screen like this will appear:
    user posted image
     
  • Leave everything as it is, then click Extract. This will unpack Emsisoft Emergency Kit to the EEK folder located in the root drive (usually C:\).
  • Once the extraction is done, an icon will appear on your Desktop. Double click it to start Emsisoft Emergency Kit.
    user posted image
     
  • Wait for Emsisoft Emergency Kit to finish loading signatures. A screen like this should appear:
    user posted image
     
  • Choose Yes, then wait for EEK to finish updating.
  • Choose Malware Scan under the Scan button. When EEK asks to activate PUP detection, choose Yes.
  • Wait for the scan to finish.
    user posted image
     
  • If EEK detects something, all detected items will be displayed. Place a checkmark before everything, then choose Quarantine Selected.
  • If Emsisoft Emergency Kit asks to reboot, please do so immediately.
  • The scan log is located in Logs -> Scan Logs. Click on the entry of the latest scan, choose Export and save the report on your Desktop.
    user posted image
     
  • Please Copy and Paste the contents of the scan log in your next reply.


Let me see those logs in your next reply, also tell me if there are any remaining issues or concerns...

Thank you,

Kevin

fixlist.txt

Link to post
Share on other sites

Thanks for the update Jurgioslavik, continue with the following to clean up tools etc...

Navigate to and delete the following, (if present):

C:\ProgramData\Emsisoft
C:\Users\{your user name}\Desktop\start emergency kit scanner - Shortcut.lnk
C:\EEK
C:\Users\{your user name}\Desktop\EmsisoftEmergencyKit.exe


Next,

Download "Delfix by Xplode" and save it to your desktop.

Or use the following if first link is down:

"Delfix link mirror"

If your security program alerts to Delfix either, accept the alert or turn your security off.

Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator

Make Sure the following items are checked:

 
  • Remove disinfection tools <----- this will remove tools we have used.
  • Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created.
  • Reset system settings <--- this will reset any system settings back to default that were changed either by us during cleansing or malware/infection


Now click on "Run" and wait patiently until the tool has completed.

The tool will create a log when it has completed. We don't need you to post this.

Any remnant files/logs from tools we have used can be deleted…

Next,

Read the following links to fully understand PC Security and Best Practices, you may find them useful....

Answers to Common Security Questions and best Practices

Do I need a Registry Cleaner?

Take care and surf safe

Kevin... user posted image
Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.