Root Admin RubbeR DuckY Posted November 14, 2007 Root Admin ID:9943 Share Posted November 14, 2007 Problems with update form fixed. New removal functions are fully in place. Quarantine problem fixed.Check your e-mails, going out now. Link to post Share on other sites More sharing options...
mrgigabyte Posted November 14, 2007 ID:9944 Share Posted November 14, 2007 just install 072 on my two computers and everything is great at my end i just wanted to also say you guys are doing a great job and this is a great produce very happy with it i have had it since the very first beta keep up the great work mrgigabyte Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9945 Share Posted November 14, 2007 Ummm, I just updated from .71 to .72, defs were also updated to 200.However, after the install, I let the installer run MBAM, and then ran the update again just to check - and it went into a loop, trying to continually update itself (so if you see an IP that seems like it is hammering, it ain't me - just the program going screwy).Of course, to make it worse, I only noticed the looping after I started a manual scan, and saw 2 taskbar items - and upon clicking one I get he scan window and upon clicking the other I continually get the dialog box saying I already have the latest version.I'll try again after closing the program and then opening it my usual way, as opposed to letting the installer do it. (I have a sneaking suspicion that it won't happen if I manually run it). Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted November 14, 2007 Author Root Admin ID:9946 Share Posted November 14, 2007 John, full uninstall and reinstall please =) Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9947 Share Posted November 14, 2007 Ya think so? I was going to test first to see if running the program at the end of the install process was the culprit.... Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9948 Share Posted November 14, 2007 OK, checked - it still does the same. At least this time I didn't minimize the main window so I could hit enter and then click the exit button on the main window before the dialog box came back Uninstalling it now...oh, let me open email to get the link to download it too Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9949 Share Posted November 14, 2007 Marcin, uninstalled, deleted old log files, log dir and a single Bug report file I had created, and then re-installed - same exact thing is happening. Link to post Share on other sites More sharing options...
nosirrah Posted November 14, 2007 ID:9950 Share Posted November 14, 2007 is it the def check version thing again ? Link to post Share on other sites More sharing options...
nosirrah Posted November 14, 2007 ID:9951 Share Posted November 14, 2007 try again Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9952 Share Posted November 14, 2007 not like before - the definitions are updated - but after updating and giving me the dialog box that I have the latest, when I click OK the taskbar entry remains open, and another dialog box pops up - saying the same thing.This only happens when I click the update button in version 0.72 - it does not start doing this by default.Sorry, nosirrah, I didn't expect any responses - Ducky said he'd take a look at it tomorrow.BTW, I tried it again - if it updates the database, then the dialog comes up, you click the OK box and all is well. But if you try to update and you already have the current version, then it goes into it's crazy loop.Currently I have defs v 201. Link to post Share on other sites More sharing options...
joe53 Posted November 14, 2007 ID:9954 Share Posted November 14, 2007 Defs 201 loaded- no detections.No looping here with updater. Link to post Share on other sites More sharing options...
ctrlaltdelete Posted November 14, 2007 ID:9958 Share Posted November 14, 2007 No loopings here either.I did try tho i like loopings but i did not succeed in creating them.(XP Home SP2) Link to post Share on other sites More sharing options...
lurkingatu2 Posted November 14, 2007 ID:9959 Share Posted November 14, 2007 hello updated mbam from 0.71 to 0.72 d.b. 200 f.p. 9913 then closed mbam and restarted mbam and updated defs to d.b.201 f.p.9894ran a full scan no f/p'sthanks Link to post Share on other sites More sharing options...
sho-dan Posted November 14, 2007 ID:9960 Share Posted November 14, 2007 Hello MarcinMalwarebytes' Anti-Malware Version 0.72: Database ver. 201: F.P. 9894No looping, no f/ps' no problems updating with MBAM at all. good job, I have XP Home. Link to post Share on other sites More sharing options...
Walker Posted November 14, 2007 ID:9964 Share Posted November 14, 2007 Hey all,Nice to see such fast development Both fast scan and full scan went ok and no fp's, no problem updating either. (XP SP2) Link to post Share on other sites More sharing options...
2Ton Posted November 14, 2007 ID:9973 Share Posted November 14, 2007 Hello MarcinUpdated through the program's internal updater to 0.72. Database 200. Ran the updater again, database 201. Fingerprints 9894. Performed a full scan. No problems found. All good this side. Thanks. Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted November 14, 2007 Author Root Admin ID:9974 Share Posted November 14, 2007 John, something must have happened on your computer. I develop under Vista and made sure that I had no problems. Can you try to play around with it some more and see what the cause could be? Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9975 Share Posted November 14, 2007 I'll give it a shot - but I am not sure what exactly I am looking for - only thing I can see I have changed is that I installed Spybot S&D....every thing else on my computer is as it was before....I think.Let me double and triple check that to make sure.... Link to post Share on other sites More sharing options...
John L. Galt Posted November 14, 2007 ID:9976 Share Posted November 14, 2007 BTW, do you happen to have version 0.71 around that I can download and re-install? I want to double verify that this is occurring only on version .72 Link to post Share on other sites More sharing options...
nosirrah Posted November 14, 2007 ID:9978 Share Posted November 14, 2007 Move rules out of MBAM's program folder and try another update . Link to post Share on other sites More sharing options...
John L. Galt Posted November 15, 2007 ID:9982 Share Posted November 15, 2007 Doing that, it obviously could not find a db, and had to download. Again, same as before - on a successful update, the looping does not occur.But, upon updating when I already have the current db, I get the looping start. However, the looping is not *automatic*.When I click OK the first time acknowledging that i have the latest database, the dialog disappears, and I am left with a 'ghost' taskbar entry for Updating MBAM - but if I click on that entry, the dialog box comes back telling me I have the latest version - and keeps coming back after I press the OK button.I'll try screen captures or a small video if I need to illustrate further.Also, the other change I made was to stop letting CCC (ATI Catalyst Control Center) auto start via WinPatrol. I have since re-installed ATI drivers, and CCC is starting again, but to no avail - this problem is still occurring. Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted November 15, 2007 Author Root Admin ID:9983 Share Posted November 15, 2007 A video would be nice and would help shine some light on the situation. John, do you have MSN or Skype? PM me your info and we can solve the problem. Link to post Share on other sites More sharing options...
Eric the Red Posted November 16, 2007 ID:10007 Share Posted November 16, 2007 Hi Marcin,Vista Home Premium.Updated - Uninstalled 0.70 and installed 0.72 (missed 0.71) d.b. 200Saw the reference in this thread to d.b. 201 so ran update. Appeared to run normally and dialog stated had successfully updated from d.b. 200 to d.b. 200Closed mbam, removed rules.ref and launched mbam. Ran update when prompted which stalled with error code 711.Not sure what is going on, please ask if you need more detail. Link to post Share on other sites More sharing options...
Root Admin RubbeR DuckY Posted November 16, 2007 Author Root Admin ID:10011 Share Posted November 16, 2007 Interesting, error 711 would imply a corrupt database. Can you uninstall MBAM, delete it's folder, restart and reinstall it. Are you running UAC enabled by any chance? Link to post Share on other sites More sharing options...
John L. Galt Posted November 16, 2007 ID:10019 Share Posted November 16, 2007 PM'd you my info. Link to post Share on other sites More sharing options...
Recommended Posts