Proxy virus

[Alaa96]

I have Hp 350G1, running windows 10 64 bit

recently I notice that manual proxy setting are turned on on the settings every time it turn it off i find it turned on again ?

and this is the values : 

Address: http=127.0.0.1:8080;https=127.0.0.1:8080 <-loopback>

and my laptop can't open any site without running a vpn like hotspot shield because of that virus .

please help 

Edited June 21, 2018 by Alaa96
I have edited a word

[Malwarebytes]

***This is an automated reply***

Hi,

Thanks for posting in the Malware Removal for Windows Help forum. Being infected is not fun and can be very frustrating to resolve, but don't worry because we have a team of experts here help you!!

Note: Please be patient. When the site is busy it can take up to 48 hours before a malware removal helper can assist you. If no one has replied to your new topic after 48 hours please contact an Administrator to let them know.

First, if you haven't done so, please run a Threat Scan with the latest version of Malwarebytes. This may resolve your malware infection issue without the need for additional support. Click "Reveal Hidden Contents" below for details:

Spoiler

Malwarebytes can detect and remove most malware with no further actions required for free.

If you do not have Malwarebytes, please download it here and install. Be sure to post back the log as shown below.

1. Open Malwarebytes for Windows
2. To the left, click Scan > Scan Types.
   
   
    
3. Select Threat Scan. Threat Scan is the most thorough and recommended scan method available.
   
   
    
4. Click Start Scan
    

Next, if you're still experiencing issues after running Malwarebytes, then technical logs will be required to assist you. Click "Reveal Hidden Contents" below and follow the instructions to run the Farbar Recovery Scan Tool:

Spoiler

Don't use any temporary file cleaners unless requested - this can cause data loss and make a recovery difficult.

Please download the Farbar Recovery Scan Tool here and save it to your desktop. Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

1. Double-click to run it. When the tool opens click Yes to the disclaimer.
2. Press the Scan button.
   
   
    
3. It will make a log (FRST.txt) in the same directory the tool is run. Please attach or copy and paste it to your reply.
4. The first time the tool is run, it also makes another log (Addition.txt). If you've run it before it may not and you may need to select it manually.
    

Finally, attach the Malwarebytes Threat Scan, FRST.txt and Additional.txt logs to your reply. Before submitting your reply, be sure to enable "Notify me of replies" like so:  
 

Click "Reveal Hidden Contents" below for details on how to add attachments to your post.
Note: If you are unable to attach files, please copy and past the contents of the requested files in your Reply instead. 

Spoiler

To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.

 

Please Note the Following:

• One of our expert helpers will give you one-on-one assistance when one becomes available.
• Refrain from making any further changes to your computer (such as Install/Uninstall programs, using special fix tools, delete files, edit the registry, etc...) unless advised by a malware removal helper. Doing so can result in system changes which may hinder the attempts by a helper to clean your machine.
• Do not 'bump' or add a reply to your topic once it is started. Topics which appear to have replies are considered to have a helper assisting them and may be overlooked, resulting in a longer waiting period for help
• If you're using Peer 2 Peer software such as uTorrent or similar, please completely disable it from running while being assisted here.

Troubleshooting Tips

• FAQ - Malwarebytes won't run or failed to resolve my issues
• Groups authorized to help with Malware Removal for Windows logs
   

 

 

[kevinf80]

Hello Alaa96 and welcome to Malwarebytes, Continue with the following: If you do not have Malwarebytes installed do the following: Download Malwarebytes version 3 from the following link: https://www.malwarebytes.com/mwb-download/thankyou/ Double click on the installer and follow the prompts. If necessary select the Blue Help tab for video instructions.... When the install completes or Malwarebytes is already installed do the following: Open Malwarebytes, select > "settings" > "protection tab" Scroll down to "Scan Options" ensure Scan for Rootkits and Scan within Archives are both on.... Go back to "DashBoard" select the Blue "Scan Now" tab...... When the scan completes deal with any found entries... To get the log from Malwarebytes do the following:   Click on the Report tab > from main interface. Double click on the Scan log which shows the Date and time of the scan just performed. Click Export > From export you have two options: Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply   Please use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply… Next, Download Farbar Recovery Scan Tool and save it to your desktop. Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version. If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way... Be aware FRST must be run from an account with Administrator status...   Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.) Make sure Addition.txt is checkmarked under "Optional scans"   Press Scan button to run the tool.... It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply. The tool will also make a log named (Addition.txt) Please attach that log to your reply. Let me see those logs in your reply... Thank you, Kevin....

[Alaa96]

Hi Kevin,
thank you for your fast replay..

this is the log files you asked for ☺️

 

 

Addition.txt

FRST.txt

malwarealaa.txt

[Alaa96]

will i think it worked out 

after restarting my laptop this option finally off 

thank you you saved me

 

 

Edited June 21, 2018 by Alaa96

[kevinf80]

Not quite ther yet, do the following:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix" NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work. Open FRST and press the Fix button just once and wait. The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply. Next, Download AdwCleaner by Malwarebytes onto your Desktop. Or from this Mirror   Right-click on AdwCleaner.exe and select Run as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users) Accept the EULA (I accept), then click on Scan Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Clean button. This will kill all the active processes Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply Next, Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop Ensure to get the correct version for your system.... https://www.microsoft.com/en-gb/download/malicious-software-removal-tool-details.aspx Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window In the "Scan Type" window, select Quick Scan Perform a scan and Click Finish when the scan is done. Retrieve the MSRT log as follows, and post it in your next reply: 1) Select the Windows key and R key together to open the "Run" function 2) Type or Copy/Paste the following command to the "Run Line" and Press Enter: notepad c:\windows\debug\mrt.log The log will include log details for each time MSRT has run, we only need the most recent log by date and time.... Let me see those logs in your reply, also tell me if there are any remaining issues or concerns... Thank you, Kevin...

fixlist.txt

[Alaa96]

HI,

this is the log files

 

 

Fixlog.txt

AdwCleaner[C00].txt

mrt.log

[kevinf80]

Hiya Alaa96,

How does your system respond now, any remaining issues or concerns..? if all ok run as follows to clean up:

Download "Delfix by Xplode" and save it to your desktop. Or use the following if first link is down: "Delfix link mirror" If your security program alerts to Delfix either, accept the alert or turn your security off. Double Click to start the program. If you are using Vista or higher, please right-click and choose run as administrator Make Sure the following items are checked:   Remove disinfection tools <----- this will remove tools we may have used. Purge System Restore <--- this will remove all previous and possibly exploited restore points, a new point relative to system status at present will be created. Reset system settings <--- this will reset any system settings back to default that were changed either by us during cleansing or malware/infection Now click on "Run" and wait patiently until the tool has completed. The tool will create a log when it has completed. We don't need you to post this. Any remnant files/logs from tools we have used can be deleted… Next, Read the following links to fully understand PC Security and Best Practices, you may find them useful.... Answers to Common Security Questions and best Practices Do I need a Registry Cleaner? Take care and surf safe Kevin...

[Alaa96]

I don't see any issues remaining

I really appreciate your help  

thank you so much?

[kevinf80]

You`re very welcome Alaa96, comback anytime...

Regards,

Kevin...

[kevinf80]

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread.

Thanks