Jump to content

Browsers redirecting to ads


Recommended Posts

Hello and welcome,

P2P/Piracy Warning:

If you're using Peer 2 Peer software such as uTorrent, BitTorrent or similar you must either fully uninstall them or completely disable them from running while being assisted here.Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.If you have illegal/cracked software, cracks, keygens etc. on the system, please remove or uninstall them now and read the policy on Piracy.

 

Next,

 

Please open Malwarebytes Anti-Malware.

  • On the Settings tab > Detection and Protection sub tab, Detection Options, tick the box "Scan for rootkits".
  • Under Non-Malware Protection sub tab Change PUP and PUM entries to Treat detections as Malware
  • Click on the Scan tab, then click on Scan Now >> . If an update is available, click the Update Now button.
  • A Threat Scan will begin.
  • With some infections, you may or may not see this message box.

            'Could not load DDA driver'
  • Click 'Yes' to this message, to allow the driver to load after a restart.
  • Allow the computer to restart. Continue with the rest of these instructions.
  • When the scan is complete, click Apply Actions.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more.



To get the log from Malwarebytes do the following:

  • Click on the History tab > Application Logs.
  • Double click on the scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have three options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
      XML file (*.xml)      - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
  • Recommend you use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


 

Next,

 

Download AdwCleaner by Xplode onto your Desktop.

  • Double click on Adwcleaner.exe to run the tool.
  • Click on Scan
  • Once the scan is done, click on the Clean button. <<<--- Ensure this option is completed
  • You will get a prompt asking to close all programs. Click OK.
  • Click OK again to reboot your computer.
  • A text file will open after the restart. Please post the content of that logfile in your reply.
  • You can also find the logfile at C:\AdwCleaner[sn].txt. Where n in the scan reference number

 
Next,
 
thisisujrt.gif Please download Junkware Removal Tool to your desktop.

  • Shut down your protection software now to avoid potential conflicts. (re-enable when done)
  • Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administrator".
  • The tool will open and start scanning your system.
  • Please be patient as this can take a while to complete depending on your system's specifications.
  • On completion, a log (JRT.txt) is saved to your desktop and will automatically open.
  • Post the contents of JRT.txt into your next message.


 

Next,

 

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

32 Bit version:
https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

64 Bit version:
https://www.microsoft.com/downloads/en/confirmation.aspx?FamilyId=585D2BDE-367F-495E-94E7-6349F4EFFC74&displaylang=en

Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and  Click Finish when the scan is done.

Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log
 

Next,

 

Run FRST one more time, ensure all boxes are checkmarked under "Whitelist" but only Addition.txt under "Optional scan" Select scan, when done post the two logs....
 

Let me see those logs, also give an update on any remaining issues or concerns....

 

Thank you,

 

Kevin

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.