Looks like i am infected with "unknown virus"

[DiscordCZ]

Hello there,

 

i have been informed that i am infected, so there are files and link to original post here. I want to add just that it happens by random. Can't predict it by myself.

 

Link: https://forums.malwarebytes.org/index.php?/topic/159935-mbamservicesexe-high-disc-usage-even-pc-freezed/

 

I am uploading new logs there, but in orig. post you can see few days old logs if it helps.

 

I hope i do not must to reinstall system.

Please help, thank you

Addition.txt

FRST.txt

CheckResults.txt

[MrCharlie]

Welcome to the forum. (Do what you can)

General P2P/Piracy Warning:

 

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

2. If you have illegal/cracked software (MS Office, Adobe Products), cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

1. Please run a Threat Scan with Malwarebytes

Start Malwarebytes 2.0..........

Click on Settings > Detection and Protection > Non-Malware Protection > PUP (Potentially Unwanted Program) detections > Make sure it's set to Treat detections as malware

Same for PUM (Potentially Unwanted Modifications)

Quarantine all that's found

Post the log (save the log as a .txt file not .xml)

Then......

2. Please download and run RogueKiller 32 bit to your desktop.

RogueKiller<---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Wait for the Prescan to finish

Click Scan to scan the system.

When the scan completes > Don't Fix anything! > Click on the Report Button and post the Report back here.

Don't run any other options, they're not all bad!!!!!!!

RogueKiller logs will also be located here:

%programdata%/RogueKiller/Logs <-------W7

C:\Documents and Settings\All Users\Application Data\RogueKiller\Logs <-------XP

(please don't put logs in code or quotes and use the default font)

MrC

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running. Create a new restore point

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear".

------->Your topic will be closed if you haven't replied within 3 days!<--------

If I don't respond within 24 hours, please send me a PM

[DiscordCZ]

logs

mbam-log.txt

RKreport_SCN_11022014_063042.log

[MrCharlie]

You should uninstall this program if possible:
Software Version Updater

==========================================


Run RogueKiller again and click Scan
When the scan completes > click on the Registry tab
Put a check next to all of these and uncheck the rest: (if found)
 

[Hidden.From.SCM] (X64) HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\knwmampw (System32\drivers\iawwkaa.sys) -> Nalezeno

Now click Delete on the right hand column under Options

==============================


Download the attached fixlist.txt to the same folder as FRST.exe/FRST64.exe.
Run FRST.exe/FRST64.exe and click Fix only once and wait
The tool will create a log (Fixlog.txt) in the folder, please post it to your reply.

=============================

Make sure you have created that system restore point before you continue!

Please read the directions carefully so you don't end up deleting something that is good!!

If in doubt about an entry....please ask or choose Skip!!!!

Don't Delete anything unless instructed to!

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose
Skip and click on Continue

If a suspicious object is detected, the default action will be Skip, click on Continue

Please note that TDSSKiller can be run in safe mode if needed.

Please download the latest version of TDSSKiller from HERE and save it to your Desktop.

• Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters. (Leave the KSN box checked)
  
  
• Put a checkmark beside loaded modules.
  
  
• A reboot will be needed to apply the changes. Do it.
• TDSSKiller will launch automatically after the reboot. Also your computer may seem very slow and unusable. This is normal. Give it enough time to load your background programs.
• Then click on Change parameters in TDSSKiller.
• Check all boxes then click OK.
  
  
• Click the Start Scan button.
  
  
• The scan should take no longer than 2 minutes.
• If a suspicious object is detected, the default action will be Skip, click on Continue.
  
  
  
  Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.
  
  If in doubt about an entry....please ask or choose Skip
• If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.
  Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.
  
  
  
  Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.
• A report will be created in your root directory, (usually C:\ folder) in the form of "TDSSKiller.[Version]_[Date]_[Time]_log.txt". Please copy and paste the contents of that file here. There may be 3 logs > so post or attach all of them.
• Sometimes these logs can be very large, in that case please attach it or zip it up and attach it.

Here's a summary of what to do if you would like to print it out:

If in doubt about an entry....please ask or choose Skip

Don't Delete anything unless instructed to!

If a suspicious object is detected, the default action will be Skip, click on Continue

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose
Skip and click on Continue

Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

If malicious objects are found, they will show in the Scan results and offer three (3) options.

Ensure Cure is selected, then click Continue => Reboot now to finish the cleaning process.
Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

~~~~~~~~~~~~~~~~~~~~

You can attach the logs if they're too long:

Bottom right corner of this page.


New window that comes up.


MrC

[DiscordCZ]

SVU has been uninstalled. When i tried to compress log file (rightclick > compress via 7zip), but my PC crashed. Can something do it with this?

 

There are logs.

TDSSKiller.3.0.0.41_03.11.2014_08.48.37_log.txt

Fixlog.txt

[MrCharlie]

When i tried to compress log file (rightclick > compress via 7zip), but my PC crashed. Can something do it with this?

Uninstall and re-install the program.

What problems remain???

MrC

[DiscordCZ]

Now is everything going just fine, that program i reinstalled few times and tried different versions. Still remains.. time to use something else i guess.

[MrCharlie]

Windows has it's own zip file program, no need to install another one.

MrC

[AdvancedSetup]

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!