Jump to content

Explorer.exe virus OutBound

alewin

By alewin
in Resolved Malware Removal Logs

 Share

Recommended Posts

MrCharlie

MrCharlie

Posted
Posted

Welcome to the forum. (Do what you can)

General P2P/Piracy Warning:

 

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

2. If you have illegal/cracked software (MS Office, Adobe Products), cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

 

<====><====><====><====><====><====><====><====>

 

Please run a Threat Scan with Malwarebytes (if possible)

Start Malwarebytes 2.0.........

Click on Settings > Detection and Protection > Non-Malware Protection > PUP (Potentially Unwanted Program) detections > Make sure it's set to Treat detections as malware

Same for PUM (Potentially Unwanted Modifications)

Quarantine all that's found

Post the log (save the log as a .txt file not .xml)

Then......

Please download Farbar Recovery Scan Tool (FRST) and save it to a folder.

(use correct version for your system.....Which system am I using?)

FRST <----for 32 bit systems

FRST64 <----for 64 bit systems

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button. (make sure the Addition box is checked)
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
If the logs are large, you can attach them:

To attach a log:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

Last................

Please download and run RogueKiller 32 bit to your desktop.

RogueKiller<---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Wait for the Prescan to finish

Click Scan to scan the system.

When the scan completes > Don't Fix anything! > Click on the Report Button > Copy and paste the Report back here.

Don't run any other options, they're not all bad!!!!!!!

RogueKiller logs will also be located here:

%programdata%/RogueKiller/Logs <-------W7

C:\Documents and Settings\All Users\Application Data\RogueKiller\Logs <-------XP

(please don't put logs in code or quotes and use the default font)

 

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running. Create a new restore point

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear".

------->Your topic will be closed if you haven't replied within 3 days!<--------

If I don't respond within 24 hours, please send me a PM

Link to post
Share on other sites
alewin

alewin

Posted
  • Author
Posted
RogueKiller V9.2.9.0 (x64) [Jul 11 2014] by Adlice Software





 

Operating System : Windows 7 (6.1.7601 Service Pack 1) 64 bits version

Started in : Normal mode

User : **** [Admin rights]

Mode : Scan -- Date : 09/04/2014  20:05:26

 

¤¤¤ Bad processes : 3 ¤¤¤

[suspicious.Path] explorer.exe -- C:\ProgramData\Microsoft\Crypto\RSA64\CryptoProvider.dll[-] -> UNLOADED

[suspicious.Path] explorer.exe -- C:\ProgramData\Microsoft\Crypto\RSA64\rsa64.dll[-] -> UNLOADED

[suspicious.Path] explorer.exe -- C:\Users\****\AppData\Local\Spoon\3.33.7.409\Spoon.Client.Shell64.dll[-] -> UNLOADED

 

¤¤¤ Registry Entries : 20 ¤¤¤

[PUM.Proxy] (X64) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyServer : 103.11.116.46:80  -> FOUND

[PUM.Proxy] (X86) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyServer : 103.11.116.46:80  -> FOUND

[PUM.Policies] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND

[PUM.Policies] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System | DisableRegistryTools : 0  -> FOUND

[PUM.StartMenu] (X64) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced | Start_ShowMyGames : 0  -> FOUND

[PUM.StartMenu] (X86) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced | Start_ShowMyGames : 0  -> FOUND

[PUM.DesktopIcons] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {20D04FE0-3AEA-1069-A2D8-08002B30309D} : 1  -> FOUND

[PUM.DesktopIcons] (X64) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {59031a47-3f72-44a7-89c5-5595fe6b30ee} : 1  -> FOUND

[PUM.DesktopIcons] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {20D04FE0-3AEA-1069-A2D8-08002B30309D} : 1  -> FOUND

[PUM.DesktopIcons] (X86) HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel | {59031a47-3f72-44a7-89c5-5595fe6b30ee} : 1  -> FOUND

[PUM.HomePage] (X64) HKEY_USERS\.DEFAULT\Software\Microsoft\Internet Explorer\Main | Start Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=msnhome  -> FOUND

[PUM.HomePage] (X86) HKEY_USERS\.DEFAULT\Software\Microsoft\Internet Explorer\Main | Start Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=msnhome  -> FOUND

[PUM.HomePage] (X64) HKEY_USERS\S-1-5-18\Software\Microsoft\Internet Explorer\Main | Start Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=msnhome  -> FOUND

[PUM.HomePage] (X86) HKEY_USERS\S-1-5-18\Software\Microsoft\Internet Explorer\Main | Start Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=msnhome  -> FOUND

[PUM.SearchPage] (X64) HKEY_USERS\.DEFAULT\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

[PUM.SearchPage] (X86) HKEY_USERS\.DEFAULT\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

[PUM.SearchPage] (X64) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

[PUM.SearchPage] (X86) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

[PUM.SearchPage] (X64) HKEY_USERS\S-1-5-18\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

[PUM.SearchPage] (X86) HKEY_USERS\S-1-5-18\Software\Microsoft\Internet Explorer\Main | Search Page : http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch  -> FOUND

 

¤¤¤ Scheduled tasks : 0 ¤¤¤

 

¤¤¤ Files : 0 ¤¤¤

 

¤¤¤ HOSTS File : 1 ¤¤¤

[C:\Windows\System32\drivers\etc\hosts] 127.0.0.1       localhost

 

¤¤¤ Antirootkit : 0 (Driver: LOADED) ¤¤¤

 

¤¤¤ Web browsers : 0 ¤¤¤

 

¤¤¤ MBR Check : ¤¤¤

+++++ PhysicalDrive0: WDC WD3200BEVT-35ZCT0 ATA Device +++++

--- User ---

[MBR] 2a77ff3afde5edd653ebc44eaf212374

[bSP] 1b66cfe1ef848063193276ce984fbc66 : Windows Vista/7/8 MBR Code

Partition table:

0 - [XXXXXX] LINUX-SWP (0x42) [VISIBLE] Offset (sectors): 63 | Size: 0 MB

1 - [XXXXXX] ACER (0x27) [VISIBLE] Offset (sectors): 2048 | Size: 10240 MB

2 - [XXXXXX] LINUX-SWP (0x42) [VISIBLE] Offset (sectors): 20973568 | Size: 148527 MB

3 - [ACTIVE] LINUX-SWP (0x42) [VISIBLE] Offset (sectors): 325156864 | Size: 146476 MB

User = LL1 ... OK

User = LL2 ... OK

 

Addition.txt

FRST.txt

RKreport_SCN_09042014_200526.log

Link to post
Share on other sites
MrCharlie

MrCharlie

Posted
Posted

Did you set this proxy:
 

[PUM.Proxy] (X64) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyServer : 103.11.116.46:80 -> FOUND
[PUM.Proxy] (X86) HKEY_USERS\S-1-5-21-853470554-1097741747-2768350736-1001\Software\Microsoft\Windows\CurrentVersion\Internet Settings | ProxyServer : 103.11.116.46:80 -> FOUND
[PUM.Policies] (X64)

 


======================================

 

Lets run some scans:

Make sure you have created a restore point and.....
bwebb7v.jpgDownload Delfix from Here and save it to your desktop.

  • Place a check mark in front of .......
  • Create registry backup <---only!
  • Uncheck the rest!
  • Click the Run button.

    Close the tool out when it's done....we'll use it later.

    ======================================

    Make sure you have created that system restore point before you continue!

    Please read the directions carefully so you don't end up deleting something that is good!!

    If in doubt about an entry....please ask or choose Skip!!!!

    Don't Delete anything unless instructed to!

    If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose
    Skip and click on Continue

    If a suspicious object is detected, the default action will be Skip, click on Continue

    Please note that TDSSKiller can be run in safe mode if needed.

    Please download the latest version of TDSSKiller from HERE and save it to your Desktop.
    • Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters. (Leave the KSN box checked)

      tds2.jpg
    • Put a checkmark beside loaded modules.

      13040712472913819.png
    • A reboot will be needed to apply the changes. Do it.
    • TDSSKiller will launch automatically after the reboot. Also your computer may seem very slow and unusable. This is normal. Give it enough time to load your background programs.
    • Then click on Change parameters in TDSSKiller.
    • Check all boxes then click OK.

      clip.jpg
    • Click the Start Scan button.

      tds2.jpg
    • The scan should take no longer than 2 minutes.
    • If a suspicious object is detected, the default action will be Skip, click on Continue.

      tdsskiller_guide_5.gif

      Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

      If in doubt about an entry....please ask or choose Skip
    • If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.
      Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.

      tdsskiller_guide_3.gif

      Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.
    • A report will be created in your root directory, (usually C:\ folder) in the form of "TDSSKiller.[Version]_[Date]_[Time]_log.txt". Please copy and paste the contents of that file here. There may be 3 logs > so post or attach all of them.
    • Sometimes these logs can be very large, in that case please attach it or zip it up and attach it.

    Here's a summary of what to do if you would like to print it out:

    If in doubt about an entry....please ask or choose Skip

    Don't Delete anything unless instructed to!

    If a suspicious object is detected, the default action will be Skip, click on Continue

    If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose
    Skip and click on Continue

    Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

    If malicious objects are found, they will show in the Scan results and offer three (3) options.

    Ensure Cure is selected, then click Continue => Reboot now to finish the cleaning process.
    Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

    ~~~~~~~~~~~~~~~~~~~~

    You can attach the logs if they're too long:

    Bottom right corner of this page.
    reply1.jpg

    New window that comes up.
    replyer1.jpg

    Then...........

    Please download and run ComboFix.

    The most important things to remember when running it is to disable all your malware programs and run Combofix from your desktop.

    Please visit this webpage for download links, and instructions for running ComboFix

    http://www.bleepingcomputer.com/combofix/how-to-use-combofix

    http://www.bleepingcomputer.com/download/combofix/dl/12/ <---ComboFix direct download

    Please make sure you click download buttons that look similar to this, not "sponsored ad links":

    bleep-crop.jpg

    Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

    Information on disabling your malware programs can be found Here.

    Make sure you run ComboFix from your desktop.

    Give it at least 30-45 minutes to finish if needed.

    Please include the C:\ComboFix.txt in your next reply for further review.

    ---------->NOTE<----------

    If you get the message Illegal operation attempted on registry key that has been marked for deletion after you run ComboFix....please reboot the computer, this should resolve the problem. You may have to do this several times if needed.

    MrC
Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.