Jump to content

Am I infected?


Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Welcome to the forum.

Please download and run RogueKiller 32 Bit to your desktop.

RogueKiller 64 Bit <---use this one for 64 bit systems

Which system am I using?

Quit all running programs.

For Windows XP, double-click to start.

For Vista or Windows 7-8, do a right-click on the program, select Run as Administrator to start, & when prompted Allow to run.

Click Scan to scan the system.

When the scan completes > Close out the program > Don't Fix anything!

Don't run any other options, they're not all bad!!!!!!!

Post back the report which should be located on your desktop.

(please don't put logs in code or quotes and use the default font)

General P2P/Piracy Warning:

1. If you're using Peer 2 Peer software such uTorrent, BitTorrent or similar you must either fully uninstall it or completely disable it from running while being assisted here.

Failure to remove or disable such software will result in your topic being closed and no further assistance being provided.

2. If you have illegal/cracked software, cracks, keygens, custom (Adobe) host file, etc. on the system, please remove or uninstall them now and read the policy on Piracy.

Failure to remove such software will result in your topic being closed and no further assistance being provided.

MrC

Note:

Please read all of my instructions completely including these.

Make sure system restore is turned on and running, please create a new restore point

Make sure you're subscribed to this topic: Click on the Follow This Topic Button (at the top right of this page), make sure that the Receive notification box is checked and that it is set to Instantly

Removing malware can be unpredictable...unlikely but things can go very wrong! Backup any files that cannot be replaced. You can copy them to a CD/DVD, external drive or a pen drive

<+>Please don't run any other scans, download, install or uninstall any programs while I'm working with you.

<+>The removal of malware isn't instantaneous, please be patient.

<+>When we are done, I'll give to instructions on how to cleanup all the tools and logs

<+>Please stick with me until I give you the "all clear" and Please don't waste my time by leaving before that.

------->Your topic will be closed if you haven't replied within 3 days!<--------

(If I don't respond within 24 hours, please send me a PM)

Link to post
Share on other sites

Not much showing, lets run some scans:

First.....

Please read the directions carefully so you don't end up deleting something that is good!!

If in doubt about an entry....please ask or choose Skip!!!!

Don't Delete anything unless instructed to!

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

Skip and click on Continue

If a suspicious object is detected, the default action will be Skip, click on Continue

Please note that TDSSKiller can be run in safe mode if needed.

Please download the latest version of TDSSKiller from HERE and save it to your Desktop.

  • Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters.

    image000q.png

  • Put a checkmark beside loaded modules.

    2012081514h0118.png

  • A reboot will be needed to apply the changes. Do it.
  • TDSSKiller will launch automatically after the reboot. Also your computer may seem very slow and unusable. This is normal. Give it enough time to load your background programs.
  • Then click on Change parameters in TDSSKiller.
  • Check all boxes then click OK.

    clip.jpg

  • Click the Start Scan button.

    19695967.jpg

  • The scan should take no longer than 2 minutes.
  • If a suspicious object is detected, the default action will be Skip, click on Continue.

    67776163.jpg

    Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

    If in doubt about an entry....please ask or choose Skip

  • If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.

    Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.

    62117367.jpg

    Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

  • A report will be created in your root directory, (usually C:\ folder) in the form of "TDSSKiller.[Version]_[Date]_[Time]_log.txt". Please copy and paste the contents of that file here. There may be 3 logs > so post or attach all of them.
  • Sometimes these logs can be very large, in that case please attach it or zip it up and attach it.

Here's a summary of what to do if you would like to print it out:

If in doubt about an entry....please ask or choose Skip

Don't Delete anything unless instructed to!

If a suspicious object is detected, the default action will be Skip, click on Continue

If you get the warning about a file UnsignedFile.Multi.Generic or LockedFile.Multi.Generic please choose

Skip and click on Continue

Any entries like this: \Device\Harddisk0\DR0 ( TDSS File System ) - please choose Skip.

If malicious objects are found, they will show in the Scan results and offer three (3) options.

Ensure Cure is selected, then click Continue => Reboot now to finish the cleaning process.

Note: If Cure is not available, please choose Skip instead, do not choose Delete unless instructed.

~~~~~~~~~~~~~~~~~~~~

You can attach the logs if they're too long:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

MrC

Link to post
Share on other sites

TDSSKiller.3.0.0.19_13.01.2014_15.22.13_log.txtTDSSKiller.3.0.0.19_13.01.2014_15.26.10_log.txt

 

Here are the logs from today. I did follow you instructions and download the lastest version today.

 

I had run program previously on Jan 4th with the following results:

 

I ran Microsoft Security Scanner first.  It took 20 hours.  It found Virus:DOS/Rovnix.V in PhysicalDrive0/Partition0.  It tried to clean the file but failed so the state was partially removed.
 
I then download and ran TDSSKiller and it found and  "cured" RootKit.Boot.Cidox.b in device Harddisk0/DR0/Partition1
 
Link to post
Share on other sites

OK, that was clean....

Download aswMBR to your desktop.

http://public.avast.com/~gmerek/aswMBR.exe

Double click the aswMBR.exe to run it.

If you see this question: Would you like to download latest Avast! virus definitions?" say "NO".

Click the "Scan" button to start scan.

On completion of the scan click "Save log", save it to your desktop and post in your next reply.

NOTE. aswMBR will create MBR.dat file on your desktop. This is a copy of your MBR. Do NOT delete it.

Please zip it up and attach it to your next post.

MrC

Link to post
Share on other sites

That's all OK.....next:

Please download and run ComboFix.

The most important things to remember when running it is to disable all your malware programs and run Combofix from your desktop.

Please visit this webpage for download links, and instructions for running ComboFix

http://www.bleepingcomputer.com/combofix/how-to-use-combofix

Please make sure you click download buttons that look similar to this, not "sponsored ad links":

bleep-crop.jpg

Ensure you have disabled all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

Information on disabling your malware programs can be found Here.

Make sure you run ComboFix from your desktop.

Give it at least 30-45 minutes to finish if needed.

Please include the C:\ComboFix.txt in your next reply for further review.

---------->NOTE<----------

If you get the message Illegal operation attempted on registry key that has been marked for deletion after you run ComboFix....please reboot the computer, this should resolve the problem. You may have to do this several times if needed.

MrC

Link to post
Share on other sites

Using ComboFix......

1. Close any open browsers.

2. Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

3. Download the attached CFScript.txt, place it next to ComboFix.exe

CFScript.gif

Refering to the picture above, drag CFScript into ComboFix.exe

CAUTION: Do not mouse-click ComboFix while it is running. It may cause it to stall.

After reboot, (in case it asks to reboot)......

Please provide the contents of the ComboFix log (C:\ComboFix.txt) in your next reply.

MrC

Link to post
Share on other sites

Lets clean out any adware/spyware now: (this will require a reboot so save all your work)

Please download AdwCleaner by Xplode and save to your Desktop.

Make sure you click on download buttons that look similar to this, not "sponsored ad links":

bleep-crop.jpg

  • Double click on AdwCleaner.exe to run the tool.

    Vista/Windows 7/8 users right-click and select Run As Administrator

  • Click on the Scan button.
  • AdwCleaner will begin...be patient as the scan may take some time to complete.
  • When it's done you'll see: Pending: Please uncheck elements you don't want removed.
  • Now click on the Report button...a logfile (AdwCleaner[R0].txt) will open in Notepad for review.
  • Look over the log especially under Files/Folders for any program you want to save.
  • If there's a program you may want to save, just uncheck it from AdwCleaner.
  • If you're not sure, post the log for review. (all items found are adware/spyware/foistware)
  • If you're ready to clean it all up.....click the Clean button.
  • After rebooting, a logfile report (AdwCleaner[s0].txt) will open automatically.
  • Copy and paste the contents of that logfile in your next reply.
  • A copy of that logfile will also be saved in the C:\AdwCleaner folder.
  • Items that are deleted are moved to the Quarantine Folder: C:\AdwCleaner\Quarantine
  • To restore an item that has been deleted:
  • Go to Tools > Quarantine Manager > check what you want restored > now click on Restore.
Then..................

Open up Malwarebytes > Settings Tab > Scanner Settings > Under action for PUP > Select: Show in Results List and Check for removal.

Please Update and run a FULL Scan with Malwarebytes Anti-Malware, post the report.

Make sure that everything is checked, and click Remove Selected.

Please let me know how computer is running now, MrC

Link to post
Share on other sites

That is a Microsoft file used for an application I run.  I can delete it if you wish but what do I do about the Net32.exe windows popping up all in command windows over the place?  Is that a virus?  Please advise.

 

And how should I delete the key now?  Rerun AdwCleaner? 

Link to post
Share on other sites

More on the topic.  I booted to safe mode, reran AdwCleaner and got rid of secman.dll.  The pop up appears to be Net.Exe and a windows installer keeps coming and going.  I also see that the Norton Ghost icon in the tray has a red slash through it.  I ran a quick scan in Malwarebytes and it did not find anything. I turned the computer back off and am waiting for your response. 

 

Thanks!

Link to post
Share on other sites

It actually belongs to Babylon Toolbar which is adware:

http://forums.spybot.info/showthread.php?65321-Manual-Removal-Guide-for-Babylon-Toolbar

Also there's no files in the registry, just directions/instructions.

---------------------------------------------

Please download Farbar Recovery Scan Tool and save it to a folder. (use correct version for your system.....Which system am I using?)

Please make sure you click download buttons that look similar to this, not "sponsored ad links":

bleep-crop.jpg

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
If the logs are large, you can attach them:

To attach a log:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

MrC

Link to post
Share on other sites

Net.exe command window keep popping around?

From what I know it's related to Norton Ghost, there's also many errors in your logs referring to it.

----------------------------------------


Download the attached fixlist.txt to the same folder as FRST.
Run FRST.exe and click Fix only once and wait
The tool will create a log (Fixlog.txt) in the folder, please post it to your reply.

Let me know....MrC

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.