Jump to content

Moneypak fbi virus no safe mode no Repair your computer

lesnocal

By lesnocal
in Resolved Malware Removal Logs

 Share

Recommended Posts

lesnocal

lesnocal

Posted
Posted

I have read many posts here and have not found one that matches.  I have a friend who has this virus on their laptop running vista.  All the instructions seem pretty simple to follow, except they require using Repair your Computer.

 

I go to advanced boot options, but I find no item labeled "Repair your computer"

 

I have;

 

Safe Mode

Safe Mode with Networking

Safe Mode with Command Prompt

 

Enable Logging

Enable low-resolution video

Last known good configuration

Directory Services Restore Mode

Debugging Mode

Disable automatic restart on system failure

Disable Driver Signature Enforcement

 

Start Windows Normally

 

I am not sure what to do here.  Any and all help would be greatly appreciated.

Link to post
Share on other sites
MrCharlie

MrCharlie

Posted
Posted

You'll need a Windows disk:

On a clean machine, please download Farbar Recovery Scan Tool and save it to a flash drive.

Note: You need to run the version compatible with your system.

Plug the flashdrive into the infected PC.

To enter System Recovery Options from the Advanced Boot Options:
  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Use the arrow keys to select the Repair your computer menu item.
  • Select US as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account an click Next.
Note: In case you can not enter System Recovery Options by using F8 method, you can use Windows installation disc, or make a repair disc. Any Windows installation disc or a repair disc made on another computer can be used.

To make a repair disk on Windows 7 consult: http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

To enter System Recovery Options by using Windows installation disc:

  • Insert the installation disc.
  • Restart your computer.
  • If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.
  • Click Repair your computer.
  • Select US as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account and click Next.
On the System Recovery Options menu you will get the following options:

Startup Repair

System Restore

Windows Complete PC Restore

Windows Memory Diagnostic Tool

Command Prompt

Select Command Prompt

Once in the Command Prompt:

  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst (for x64 bit version type e:\frst64) and press Enter

    Note: Replace letter e with the drive letter of your flash drive.

  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
Let me know....MrC
Link to post
Share on other sites
MrCharlie

MrCharlie

Posted
Posted

Please read the following information first.
 

You're infected with Rootkit.ZeroAccess, a BackDoor Trojan also:

BACKDOOR WARNING

------------------------------

One or more of the identified infections is known to use a backdoor.

This allows hackers to remotely control your computer, steal critical system information and download and execute files.

I would advice you to disconnect this PC from the Internet immediately. If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.

Though the infection has been identified and because of it's backdoor functionality, your PC is very likely compromised and there is no way to be sure your computer can ever again be trusted. Many experts in the security community believe that once infected with this type of trojan, the best course of action would be a reformat and reinstall of the OS. Please read these for more information:

How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?
http://www.dslreports.com/faq/10451

When Should I Format, How Should I Reinstall
http://www.dslreports.com/faq/10063

I will try my best to clean this machine but I can't guarantee that it will be 100% secure afterwards.

I would change all my passwords and keep a close eye on all your sensitive accounts.

Let me know what you decide to do. If you decide to go through with the cleanup, please proceed with the following steps.


-----------------------------------------

Please download the attached fixlist.txt and copy it to your flashdrive.

NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to your operating system

On Vista or Windows 7: Now please enter System Recovery Options. (as you did before)

Run FRST64 or FRST (which ever one you're using) and press the Fix button just once and wait.
The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.

See if the computer boots normally now and if so..........run MBAR
If not...rescan with FRST and post the new log

Download Malwarebytes Anti-Rootkit from HERE

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder..... mbar-log.txt and system-log.txt

To attach a log if needed:

Bottom right corner of this page.
reply1.jpg

New window that comes up.
replyer1.jpg

~~~~~~~~~~~~~~~~~~~~~~~

Note: YOU MUST RUN THIS!!!!!!!!!!!<---------------------------------
If no additional threats were found, verify that your system is now running normally, making sure that the following items are functional:
Internet access
Windows Update
Windows Firewall
If there are additional problems with your system, such as any of those listed above or other system issues, then run the fixdamage tool included with Malwarebytes Anti-Rootkit and reboot. It's located in the Plugins folder which is in the MBAR folder.

Just run fixdamage.exe.

Verify that they are now functioning normally.


MrC

Link to post
Share on other sites
MrCharlie

MrCharlie

Posted
Posted

OK, using your flash drive...see if you put FRST into a folder and run a scan...post the log.

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
MrC
Link to post
Share on other sites
MrCharlie

MrCharlie

Posted
Posted

Download the attached fixlist.txt to the same folder as FRST.

Run FRST and click Fix only once and wait

The tool will create a log (Fixlog.txt) in the folder, please post it to your reply.

Then......

Download Malwarebytes Anti-Rootkit from HERE

  • Unzip the contents to a folder in a convenient location.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Click on the Cleanup button to remove any threats and reboot if prompted to do so.
  • Wait while the system shuts down and the cleanup process is performed.
  • Perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If they do, then click Cleanup once more and repeat the process.
  • When done, please post the two logs produced they will be in the MBAR folder..... mbar-log.txt and system-log.txt
To attach a log if needed:

Bottom right corner of this page.

reply1.jpg

New window that comes up.

replyer1.jpg

~~~~~~~~~~~~~~~~~~~~~~~

Note:

If no additional threats were found, verify that your system is now running normally, making sure that the following items are functional:

Internet access

Windows Update

Windows Firewall

If there are additional problems with your system, such as any of those listed above or other system issues, then run the fixdamage tool included with Malwarebytes Anti-Rootkit and reboot. It's located in the Plugins folder which is in the MBAR folder.

Just run fixdamage.exe.

Verify that they are now functioning normally.

MrC

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.