Jump to content

MalwareBytes Update Failure

planoisgood
 Share

Recommended Posts

Firefox

Firefox

Posted
Posted

As long as it is NOT due to current live Malware preventing the update then this method may help restore the ability to run updates

After each step please try to run the Update again in the MBAM program.

STEP 01

Backup the Registry:

Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from here
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.

    [*]Make sure that at least the first two check boxes are selected.

    [*]Click on OK

    [*]Then click on YES to create the folder.

Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe

Once you've completed backing up your Registry, please perform the following fixes until fixed or all methods have been tried

STEP 02

Disable Internet Explorer Proxy Settings and Reset TCP/IP

It is very important that these steps be carried out exactly as shown otherwise the fix will not work.

If you have any questions please ask before moving on.

  • Please start Notepad and using your mouse make sure you select and copy all the information below in the Code box into your new document.
  • Then save the file as "fixme.bat" to your Desktop
  • In the drop down box for Save as type: make sure you select All Files (*.*) and keep the quotes on the name as well. Then close the new file.
    @ECHO OFF
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyServer /f
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyOverride /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable  /t REG_DWORD /d 0 /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f
    netsh int ip reset resetlog.txt


  • On Windows XP you can double-click the file to run it.
  • On Vista/Win7 you need to Right click the file and choose Run as administrator to run it. With User Account Control on it should ask permission to run it. Click Yes
  • This will flash a black DOS box very quickly and go away, this is normal.
  • Restart your computer now.
  • Launch Internet Explorer and see if you can connect to the Internet.
  • Launch MBAM and check for Updates

STEP 03

Ping the Content Delivery Network

For Windows XP:

Click on START - RUN and type in or Copy/Paste the following and verify that you get a response

CMD.EXE /K PING mbam-cdn.malwarebytes.org

For Windows Vista or Windows 7:

Click on START and in the search line type in CMD and you should see cmd.exe show on the menu. Right click over cmd.exe and select Run as administrator

Then in the DOS console window type in the following and press the Enter key and verify that you get a response

PING mbam-cdn.malwarebytes.org

If all the pings failed then please try running the following command

TRACERT mbam-cdn.malwarebytes.org

Then copy and paste back the results on your next reply.

STEP 04

Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs:

For Windows XP:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For Windows Vista or Windows 7:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For 64 bit versions of Windows Vista or Windows 7:

  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\SysWoW64\drivers\mbamswissarmy.sys

Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude MBAM.EXE from it as well

The FAQ contains examples of setting file exclusions for some known AV products.

If that still does not allow you to access the site yet another computer on the same network can, then that would seem to indicate its quite possibly infected.

We don't work on Malware removal in the general forums.

Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here.

One of the expert helpers there will give you one-on-one assistance when one becomes available.

After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someon has replied to your post.

Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

Link to post
Share on other sites
planoisgood

planoisgood

Posted
  • Author
Posted

Please find Results

Thanks

Pinging mwbyte.vo.llnwd.net [68.142.118.254] with 32 bytes of data:

Reply from 68.142.118.254: bytes=32 time=16ms TTL=56

Reply from 68.142.118.254: bytes=32 time=18ms TTL=56

Reply from 68.142.118.254: bytes=32 time=18ms TTL=56

Reply from 68.142.118.254: bytes=32 time=18ms TTL=56

Ping statistics for 68.142.118.254:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 16ms, Maximum = 18ms, Average = 17ms

C:\Documents and Settings\Welcome>TRACERT mbam-cdn.malwarebytes.org

Tracing route to mwbyte.vo.llnwd.net [68.142.118.254]

over a maximum of 30 hops:

1 * * * Request timed out.

2 * * * Request timed out.

3 12 ms 11 ms 12 ms 24.93.65.51

4 37 ms 31 ms 29 ms xe-7-0-3.chrlncpop-rtr1.southeast.rr.com [24.93.

64.23]

5 17 ms 15 ms 28 ms ae-3-0.cr0.atl20.tbone.rr.com [66.109.6.82]

6 18 ms 15 ms 16 ms ae-0-0.pr0.atl20.tbone.rr.com [66.109.6.171]

7 26 ms 24 ms 25 ms 66.109.9.62

8 21 ms 24 ms 24 ms tge2-1.fr3.atl1.llnw.net [68.142.119.193]

9 14 ms 17 ms 16 ms cdn-68-142-118-254.atl1.llnw.net [68.142.118.254

]

Trace complete.

As long as it is NOT due to current live Malware preventing the update then this method may help restore the ability to run updates

After each step please try to run the Update again in the MBAM program.

STEP 01

Backup the Registry:

Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from here
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
    • Note: the default location is C:\Windows\ERDNT which is acceptable.

    [*]Make sure that at least the first two check boxes are selected.

    [*]Click on OK

    [*]Then click on YES to create the folder.

Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe

Once you've completed backing up your Registry, please perform the following fixes until fixed or all methods have been tried

STEP 02

Disable Internet Explorer Proxy Settings and Reset TCP/IP

It is very important that these steps be carried out exactly as shown otherwise the fix will not work.

If you have any questions please ask before moving on.

  • Please start Notepad and using your mouse make sure you select and copy all the information below in the Code box into your new document.
  • Then save the file as "fixme.bat" to your Desktop
  • In the drop down box for Save as type: make sure you select All Files (*.*) and keep the quotes on the name as well. Then close the new file.
    @ECHO OFF
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyServer /f
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyOverride /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable  /t REG_DWORD /d 0 /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f
    netsh int ip reset resetlog.txt


  • On Windows XP you can double-click the file to run it.
  • On Vista/Win7 you need to Right click the file and choose Run as administrator to run it. With User Account Control on it should ask permission to run it. Click Yes
  • This will flash a black DOS box very quickly and go away, this is normal.
  • Restart your computer now.
  • Launch Internet Explorer and see if you can connect to the Internet.
  • Launch MBAM and check for Updates

STEP 03

Ping the Content Delivery Network

For Windows XP:

Click on START - RUN and type in or Copy/Paste the following and verify that you get a response

CMD.EXE /K PING mbam-cdn.malwarebytes.org

For Windows Vista or Windows 7:

Click on START and in the search line type in CMD and you should see cmd.exe show on the menu. Right click over cmd.exe and select Run as administrator

Then in the DOS console window type in the following and press the Enter key and verify that you get a response

PING mbam-cdn.malwarebytes.org

If all the pings failed then please try running the following command

TRACERT mbam-cdn.malwarebytes.org

Then copy and paste back the results on your next reply.

STEP 04

Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs:

For Windows XP:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For Windows Vista or Windows 7:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For 64 bit versions of Windows Vista or Windows 7:

  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\SysWoW64\drivers\mbamswissarmy.sys

Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude MBAM.EXE from it as well

The FAQ contains examples of setting file exclusions for some known AV products.

If that still does not allow you to access the site yet another computer on the same network can, then that would seem to indicate its quite possibly infected.

We don't work on Malware removal in the general forums.

Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here.

One of the expert helpers there will give you one-on-one assistance when one becomes available.

After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someon has replied to your post.

Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.