Erix Posted August 24, 2020 ID:1403321 Share Posted August 24, 2020 Hello again Malwarebytes community, Hoping you are keeping safe and staying strong, we have just released a new version of your product, 4.2.0.82 component package 1.0.1025 As before if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in this 4.2: You can now filter out Reports with no detections from the Reports list Frequently asked questions have been added to the Help Screen Improved detection and remediation Improved performance Some Issues now addressed: Fixed: MB4 doesn't exit play mode if the application is terminated forcibly Fixed: Reboot is required in case malware detected on Hot swap SCSI volume Fixed: Backslash in the end of Custom installation path cause incorrect exception Fixed: assorted issues with Scan Reports management, fail to delete or select under certain circumstances Fixed: Several other UI issues Thank you so much. -Erix 1 1 Link to post Share on other sites More sharing options...
Erix Posted September 3, 2020 Author ID:1405487 Share Posted September 3, 2020 Greetings again Malwarebytes community, Hoping you are safe and calm, we have just released a new version of your product 4.2.0.82 component package 1.0.1036 As always, if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New: Enhanced prompting and managing for re-enabling protections Improved memory usage Improved detection and remediation Improved performance Some Issues now addressed: Fixed: Cannot delete report files under certain circumstances Fixed: Wrong scan report opened or exported in UI Fixed: MBAM isn't exited from Play Mode if game application is terminated forcibly Fixed: Several UI issues Thank you so much. -Erix 1 Link to post Share on other sites More sharing options...
Erix Posted September 16, 2020 Author ID:1407928 Share Posted September 16, 2020 Hello Malwarebytes community, Hoping you are keeping safe and calm, we have just released a new version of your product 4.2.1.89 component package 1.0.1045 As always, if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in 4.2.1: Improved Upgrading experience Improved detection and remediation Improved performance Some Issues now addressed: Fixed: License Status shows wrong renewal info Fixed: Signature verification causing BSOD on some 3rd party signed process images Fixed: Certain BSOD (in mbamchameleon.sys) Stack Overflow on x86 systems during initialization Fixed: Disabling Chrome/Edge shield is not working Fixed: Unable to Edit/Delete custom shields from the Protected applications dialog Fixed: Several UI issues Thank you so much. -Erix 2 Link to post Share on other sites More sharing options...
Erix Posted October 5, 2020 Author ID:1412016 Share Posted October 5, 2020 Hello Malwarebytes Community, Hoping you are all healthy, safe and in good spirits, we have just released a new version of your product, 4.2.1.89 component package 1.0.1061 As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in this 1.0.1061 component package: Improved Scan Report Usability Improved detection and remediation Improved performance Some Issues now addressed: Fixed: W7 Install or Upgrade failure under certain circumstances Fixed: Fail to display "Malwarebytes is up to date" when the UI is relaunched after a successful CU under certain circumstances Fixed: Protection updates could hang under certain circumstances and prevent scheduled scans from running Fixed: Several UI issues Thank you so much. -Erix 4 Link to post Share on other sites More sharing options...
Erix Posted October 14, 2020 Author ID:1414127 Share Posted October 14, 2020 (edited) Ladies and gentlemen from our Malwarebytes Community Hoping you are all safe and calm, we want to let you know we have started rolling out a new version of your product, 4.2.1.89 component package 1.0.1070 As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in 1.0.1070: Improved detection and remediation Improved performance Improved updating functionality Some Issues now addressed: Fixed: MB4.2.1 fails to communicate with the license server while 4.1.2 can Fixed: 0x139 MWAC BSOD under certain circumstances Fixed: IPv6 ping doesn't work with enabled MWAC Fixed: Some UI issues Thank you so much. -Erix Edited October 14, 2020 by AdvancedSetup corrected font issue 2 1 Link to post Share on other sites More sharing options...
Erix Posted October 28, 2020 Author ID:1416969 Share Posted October 28, 2020 (edited) Malwarebytes Community, We want to let you know we have just started rolling out a new version of your product 4.2.2.95 component package 1.0.1096 As you know you don't have to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in this 4.2.2: Improved detection and remediation Improved performance Improved updating functionality Some Issues now addressed: Fixed: rundll32 AE block in Word Fixed: Mwac.sys BSOD: PAGE_FAULT_IN_NONPAGED_AREA under certain circumstances Fixed: Telemetry error "processPath is empty" after MWAC exclusion is added using tray Fixed: A few UI issues Fixed: Users report to lose connection (visibility) to the LAS or Network Neighborhood after upgrading to CU19* Thank you so much. -Erix * We are still investigating an instance where the problem seems to persist Edited October 28, 2020 by tetonbob corrected font issue 1 Link to post Share on other sites More sharing options...
Erix Posted November 5, 2020 Author ID:1418707 Share Posted November 5, 2020 (edited) Malwarebytes Community, Hoping you are having a good day, we want to let you know we have rolled out a quick new version of your product 4.2.3.96 component package 1.0.1104 If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What is new in this version: Detection efficiencies for performance improvement under certain circumstances Thank you so much. -Erix Edited November 6, 2020 by AdvancedSetup corrected font issue 1 Link to post Share on other sites More sharing options...
Erix Posted November 16, 2020 Author ID:1421148 Share Posted November 16, 2020 (edited) Ladies and gentlemen, Trusting you are all good, we want to let you know we have started rolling out a new version of your product 4.2.3.96 with component package 1.0.1112 As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in this version: AE Pentesting mode setting has been updated and defaulted to off Added warning for Penetration Testing option as an advanced setting Improved full-screen app detection Improved detection and remediation Improved updating functionality Some Issues now addressed: Fixed: Unable to detect server and Ping by name fails with MWAC enabled Fixed: Context Menu Scan Doesn't Appear after Re-install Fixed: Close Notifications After - Do Not Close cannot be selected from the first attempt MBAM window doesn't respond after Play Mode's File Explorer is closed by ESC Fixed: Some additional minor UI issues Thank you so much. -Erix Edited November 16, 2020 by AdvancedSetup corrected font issue 1 Link to post Share on other sites More sharing options...
Erix Posted November 23, 2020 Author ID:1422880 Share Posted November 23, 2020 (edited) Ladies and gentlemen from our Malwarebytes Community, We want to let you know we have started rolling out a new version of your product, 4.2.3.96 component package 1.0.1122 As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General. What’s New in this 1.0.1122 version: Added an Alert Management Setting for Teams (small business) configuration Improved prompts for Trial notifications Improved detection and remediation Improved updating functionality Some Issues now addressed: Fixed: "Close scan results?" text cut off for some display languages Fixed: MBAMInstallerService 343 fails to upgrade from MB3 Fixed: Some additional minor UI issues Thank you so much. -Erix Edited November 23, 2020 by AdvancedSetup corrected font issue 1 Link to post Share on other sites More sharing options...
Recommended Posts