Jump to content

Recommended Posts

  • Staff

Hello again Malwarebytes community,

Hoping you are keeping safe and staying strong, we have just released a new version of your product, 4.2.0.82 component package 1.0.1025

As before if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in this 4.2:

  • You can now filter out Reports with no detections from the Reports list
  • Frequently asked questions have been added to the Help Screen
  • Improved detection and remediation     
  • Improved performance

Some Issues now addressed:

  • Fixed: MB4 doesn't exit play mode if the application is terminated forcibly
  • Fixed: Reboot is required in case malware detected on Hot swap SCSI volume
  • Fixed: Backslash in the end of Custom installation path cause incorrect exception
  • Fixed: assorted issues with Scan Reports management, fail to delete or select under certain circumstances
  • Fixed: Several other UI issues

Thank you so much.

-Erix

  • Like 1
  • Thanks 1
Link to post
Share on other sites
  • Erix pinned and locked this topic
  • 2 weeks later...
  • Staff

Greetings again Malwarebytes community,

Hoping you are safe and calm, we have just released a new version of your product 4.2.0.82 component package 1.0.1036

As always, if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New:

  • Enhanced prompting and managing for re-enabling protections
  • Improved memory usage 
  • Improved detection and remediation     
  • Improved performance

Some Issues now addressed:

  • Fixed: Cannot delete report files under certain circumstances
  • Fixed: Wrong scan report opened or exported in UI
  • Fixed: MBAM isn't exited from Play Mode if game application is terminated forcibly
  • Fixed: Several UI issues

Thank you so much.

-Erix

  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...
  • Staff

Hello Malwarebytes community,

Hoping you are keeping safe and calm, we have just released a new version of your product 4.2.1.89 component package 1.0.1045

As always, if you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in 4.2.1:

  • Improved Upgrading experience
  • Improved detection and remediation     
  • Improved performance

Some Issues now addressed:

  • Fixed: License Status shows wrong renewal info
  • Fixed: Signature verification causing BSOD on some 3rd party signed process images
  • Fixed: Certain BSOD (in mbamchameleon.sys) Stack Overflow on x86 systems during initialization
  • Fixed: Disabling Chrome/Edge shield is not working
  • Fixed: Unable to Edit/Delete custom shields from the Protected applications dialog
  • Fixed: Several UI issues

Thank you so much.

-Erix

  • Thanks 2
Link to post
Share on other sites
  • 3 weeks later...
  • Staff

Hello Malwarebytes Community,

Hoping you are all healthy, safe and in good spirits, we have just released a new version of your product, 4.2.1.89 component package 1.0.1061

As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in this 1.0.1061 component package:

  • Improved Scan Report Usability
  • Improved detection and remediation     
  • Improved performance

Some Issues now addressed:

  • Fixed: W7 Install or Upgrade failure under certain circumstances 
  • Fixed: Fail to display "Malwarebytes is up to date" when the UI is relaunched after a successful CU under certain circumstances
  • Fixed: Protection updates could hang under certain circumstances and prevent scheduled scans from running
  • Fixed: Several UI issues

Thank you so much.

-Erix

  • Thanks 4
Link to post
Share on other sites
  • 2 weeks later...
  • Staff

Ladies and gentlemen from our Malwarebytes Community

Hoping you are all safe and calm, we want to let you know we have started rolling out a new version of your product, 4.2.1.89 component package 1.0.1070

As always, If  you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in 1.0.1070:

  • Improved detection and remediation     
  • Improved performance
  • Improved updating functionality

Some Issues now addressed:

  • Fixed: MB4.2.1 fails to communicate with the license server while 4.1.2 can
  • Fixed: 0x139 MWAC BSOD under certain circumstances
  • Fixed: IPv6 ping doesn't work with enabled MWAC
  • Fixed: Some UI issues

Thank you so much.

-Erix

Edited by AdvancedSetup
corrected font issue
  • Like 2
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...
  • Staff

Malwarebytes Community,

We want to let you know we have just started rolling out a new version of your product 4.2.2.95 component package 1.0.1096

As you know you don't have to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in this 4.2.2:

  • Improved detection and remediation     
  • Improved performance
  • Improved updating functionality

Some Issues now addressed:

  • Fixed: rundll32 AE block in Word
  • Fixed: Mwac.sys BSOD: PAGE_FAULT_IN_NONPAGED_AREA under certain circumstances
  • Fixed: Telemetry error "processPath is empty" after MWAC exclusion is added using tray
  • Fixed: A few UI issues
  • Fixed: Users report to lose connection (visibility) to the LAS or Network Neighborhood after upgrading to CU19*

Thank you so much.

-Erix

* We are still investigating an instance where the problem seems to persist

Edited by tetonbob
corrected font issue
  • Thanks 1
Link to post
Share on other sites
  • Staff

Malwarebytes Community,

Hoping you are having a good day, we want to let you know we have rolled out a quick new version of your product 4.2.3.96 component package 1.0.1104

If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What is new in this version:

  • Detection efficiencies for performance improvement under certain circumstances

Thank you so much.

-Erix

Edited by AdvancedSetup
corrected font issue
  • Thanks 1
Link to post
Share on other sites
  • 2 weeks later...
  • Staff

Ladies and gentlemen,

Trusting you are all good, we want to let you know we have started rolling out a new version of your product 4.2.3.96 with component package 1.0.1112

As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in this version:

  • AE Pentesting mode setting has been updated and defaulted to off
  • Added warning for Penetration Testing option as an advanced setting
  • Improved full-screen app detection 
  • Improved detection and remediation     
  • Improved updating functionality

Some Issues now addressed:

  • Fixed: Unable to detect server and Ping by name fails with MWAC enabled
  • Fixed: Context Menu Scan Doesn't Appear after Re-install
  • Fixed: Close Notifications After - Do Not Close cannot be selected from the first attempt
  • MBAM window doesn't respond after Play Mode's File Explorer is closed by ESC
  • Fixed: Some additional minor UI issues

Thank you so much.

-Erix

Edited by AdvancedSetup
corrected font issue
  • Thanks 1
Link to post
Share on other sites
  • Staff

Ladies and gentlemen from our Malwarebytes Community,

We want to let you know we have started rolling out a new version of your product, 4.2.3.96 component package 1.0.1122

As always, If you don't want to wait for the 'Update Available' notification, go right ahead and retrieve the update manually by clicking "Check for updates" in Settings > General.

What’s New in this 1.0.1122 version:

  • Added an Alert Management Setting for Teams (small business) configuration
  • Improved prompts for Trial notifications
  • Improved detection and remediation     
  • Improved updating functionality

Some Issues now addressed:

  • Fixed: "Close scan results?" text cut off for some display languages
  • Fixed: MBAMInstallerService 343 fails to upgrade from MB3
  • Fixed: Some additional minor UI issues

Thank you so much.

-Erix

Edited by AdvancedSetup
corrected font issue
  • Thanks 1
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.