Jump to content

can't run Malwarebytes


Recommended Posts

Hello and :welcome:

Please do the following:


  • Download and run mbam-clean.exe from here
  • It will ask to restart your computer, please allow it to do so very important
  • After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

    • Note: You will need to reactivate the program using the license you were sent via email if using the Pro version
    • Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.
      Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or ask and we'll explain how to do it.

Link to post
Share on other sites

Hello and :welcome:

Please do the following:


  • Download and run mbam-clean.exe from here
  • It will ask to restart your computer, please allow it to do so very important
  • After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

    • Note: You will need to reactivate the program using the license you were sent via email if using the Pro version
    • Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.
      Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or ask and we'll explain how to do it.

just to clarify when you say temp disable antivirus do you mean to uninstall malwarebytes... or any antivirus running or both?

Link to post
Share on other sites

The mbam-clean.exe will remove Malwarebytes completely, and ask you to restart your computer.

After your computer has restarted, you need to temporarily disable (not uninstall!) your antivirus program, so that it doesn't interfere with the installation of Malwarebytes.

If you're unsure how to temporarily disable your antivirus, can you tell us which one you are using so that we can help you with that?

Link to post
Share on other sites

What it means is to disable your antivirus software while you do the install the Malwarebytes program. Once you are done installing Malwarebytes you can re-enable your antivirus program.

BTW, Malwarebytes is not an antivirus program, it is designed to work as a second layer of defense and along side your antivirus program.

Link to post
Share on other sites

If you would like, you can also follow the guide below to enter exceptions in your Avira to prevent any potential conflicts between your AV and MBAM....

AVIRA

Set Exclusions for Malwarebytes' Anti-Malware in Avira on 32 bit Windows Versions:

  1. Open Avira and click on Local Protection on the left
  2. Click on Guard
  3. Click on Configuration on the upper right
  4. Click the checkbox next to Expert mode on the upper left so that it is checked
  5. Under Guard, click the + next to Scan to expand the list
  6. Click on Exceptions
  7. Under Processes to be omitted by the Guard click the ... button next to the blank white box
  8. In the browse window that opens, navigate to C:\Program Files\Malwarebytes' Anti-Malware
  9. Double-click on mbam.exe then click the Add button
  10. Repeat steps 7-9 for the following files:
    • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
    • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe

[*]Click on Apply

[*]Close Avira's window

Set Exclusions for Malwarebytes' Anti-Malware in Avira on 64 bit Windows Versions:

  1. Open Avira and click on Local Protection on the left
  2. Click on Guard
  3. Click on Configuration on the upper right
  4. Click the checkbox next to Expert mode on the upper left so that it is checked
  5. Under Guard, click the + next to Scan to expand the list
  6. Click on Exceptions
  7. Under Processes to be omitted by the Guard click the ... button next to the blank white box
  8. In the browse window that opens, navigate to C:\Program Files (x86)\Malwarebytes' Anti-Malware
  9. Double-click on mbam.exe then click the Add button
  10. Repeat steps 7-9 for the following files:
    • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
    • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe

[*]Click on Apply

[*]Close Avira's window

Set Exclusions for Avira in Malwarebytes' Anti-Malware:

  • Open Malwarebytes' Anti-Malware and click on the Ignore List tab
  • Click the Add button on the lower left
  • In the small browse window that opens, navigate to C:\Program Files and click once on Avira and click OK
  • Close Malwarebytes' Anti-Malware

If you have any problems, please post back and one of the Experts will assist you

Thanks, ;)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.