Jump to content

three more rootkit unhooker logs


Gmanson

Recommended Posts

Hello Gmanson! Welcome to Malwarebytes' Anti-Malware Forums!

My name is Borislav and I will be glad to help you solve your problems with malware. Before we begin, please note the following:

  • The process of cleaning your system may take some time, so please be patient.
  • Follow my instructions step by step if there is a problem somewhere, stop and tell me.
  • Stay with the thread until I tell you that your system is clean. Missing symptoms does not mean that everything is okay.
  • Instructions that I give are for your system only!
  • If you don't know or can't understand something please ask.
  • Do not install or uninstall any software or hardware, while work on.
  • Keep me informed about any changes.

  • Download TDSSKiller and save it to your Desktop.
  • Extract its contents to your desktop.
  • Once extracted, open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.
  • If an infected file is detected, the default action will be Cure, click on Continue.
  • If a suspicious file is detected, the default action will be Skip, click on Continue.
  • It may ask you to reboot the computer to complete the process. Click on Reboot Now.
  • Click the Report button and copy/paste the contents of it into your next reply

Note:It will also create a log in the C:\ directory.

Link to post
Share on other sites

Hello Gmanson! Welcome to Malwarebytes' Anti-Malware Forums!

My name is Borislav and I will be glad to help you solve your problems with malware. Before we begin, please note the following:

  • The process of cleaning your system may take some time, so please be patient.
  • Follow my instructions step by step if there is a problem somewhere, stop and tell me.
  • Stay with the thread until I tell you that your system is clean. Missing symptoms does not mean that everything is okay.
  • Instructions that I give are for your system only!
  • If you don't know or can't understand something please ask.
  • Do not install or uninstall any software or hardware, while work on.
  • Keep me informed about any changes.

  • Download TDSSKiller and save it to your Desktop.
  • Extract its contents to your desktop.
  • Once extracted, open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.
  • If an infected file is detected, the default action will be Cure, click on Continue.
  • If a suspicious file is detected, the default action will be Skip, click on Continue.
  • It may ask you to reboot the computer to complete the process. Click on Reboot Now.
  • Click the Report button and copy/paste the contents of it into your next reply

Note:It will also create a log in the C:\ directory.

Do this same thing for all four computers?

Link to post
Share on other sites

The computer that is so infected takes nearly an hour to load but since i ran ATF cleaner the other day it runs alot faster and I just managed to run combofix since tdss killer didnt work like i described above. The ethernet connection isnt working atm and the only way i can work on it for now us flash drive only but here is the combofix log.

This is the one im working on atm Attached File leeanns_pc.txt ( 30.49K ) Number of downloads: 8.

log.txt

Link to post
Share on other sites

Step 1

  1. Go to Start => Run... and copy & paste next command in the field:
    ComboFix /uninstall


  2. Then hit Enter button.

This procedure will do the following:

  • Uninstall ComboFix
  • Delete its related folders and files
  • Reset your clock settings
  • Hide file extensions
  • Hide the system/hidden files
  • Resets System Restore again

P.S.: Make sure there's a space between ComboFix and /uninstall

Step 2

Download DDS and save it to your desktop from here or here or here.

Double click dds.scr to run the tool.

  • When done, DDS will open two (2) logs:
    1. DDS.txt
    2. Attach.txt

    [*]Save both reports to your desktop. Post them back to your topic.

Link to post
Share on other sites

Step 1

Going over your logs I noticed that you have LimeWire PRO installed.

  • Avoid gaming sites, pirated software, cracking tools, keygens, and peer-to-peer (P2P) file sharing programs.
  • They are a security risk which can make your computer susceptible to a smorgasbord of malware infections, remote attacks, exposure of personal information, and identity theft. Many malicious worms and Trojans spread across P2P file sharing networks, gaming and underground sites.
  • Users visiting such pages may see innocuous-looking banner ads containing code which can trigger pop-up ads and malicious Flash ads that install viruses, Trojans and spyware. Ads are a target for hackers because they offer a stealthy way to distribute malware to a wide range of Internet users.
  • The best way to reduce the risk of infection is to avoid these types of web sites and not use any P2P applications.

It is pretty much certain that if you continue to use P2P programs, you will get infected again.

I would recommend that you uninstall LimeWire PRO, however that choice is up to you. If you choose to remove these programs, you can do so via Start > Control Panel > Add/Remove Programs.

If you wish to keep it, please do not use it until your computer is cleaned.

Step 2

  • Launch Malwarebytes' Anti-Malware
  • Go to "Update" tab and select "Check for Updates". If an update is found, it will download and install the latest version.
  • Go to "Scanner" tab and select "Perform Quick Scan", then click Scan.
  • The scan may take some time to finish,so please be patient.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Make sure that everything is checked, and click Remove Selected.
  • When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
  • Copy&Paste the entire report in your next reply.

Extra Note:

If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed with the disinfection process,if asked to restart the computer,please do so immediatly.

In your next reply, please include these log(s):

  1. Malwarebytes' Anti-Malware log
  2. a new fresh DDS log only

Link to post
Share on other sites

Step 1

Please do the following to see if it resolves the issue.

Temporarily disable your Anti-Virus and other security software while installing and running.

Windows XP:

  • Click on Start and select Control Panel
  • Open Add/Remove Programs
  • Uninstall Malwarebytes' Anti-Malware
  • Restart your computer very important
  • Download and run mbam-clean.exe from here
  • It will ask to restart your computer, please allow it to do so very important
  • After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here
    • Note: You will need to reactivate the program using the license you were sent via email if using the Pro version
    • Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.
      Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or post to ask and we'll explain how to do it.

Step 2

  • Launch Malwarebytes' Anti-Malware
  • Go to "Update" tab and select "Check for Updates". If an update is found, it will download and install the latest version.
  • Go to "Scanner" tab and select "Perform Quick Scan", then click Scan.
  • The scan may take some time to finish,so please be patient.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Make sure that everything is checked, and click Remove Selected.
  • When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
  • The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
  • Copy&Paste the entire report in your next reply.

Extra Note:

If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed with the disinfection process,if asked to restart the computer,please do so immediatly.

Link to post
Share on other sites

Got an error code for MBAM install which is [OpenSCManger]Failed to Perform Desired action. Error Code 1307

Then when i got pop up with launch and update program another error Run time error 372

Failed to load control 'vbalGrid' from vbalsgrid6.ocx. Your version of vbalsgrid6.ocx may be outdated. Make sure you are using the version of the control that was provided with your application.

Clicked ok and it showed again and tried to open it same thing.

Link to post
Share on other sites

**Note: If you need more detailed information, please visit the web page of ComboFix in BleepingComputer. **

Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate.

Stay with me until given the 'all clear' even if symptoms diminish. Lack of symptoms does not always mean the job is complete.

Kindly follow my instructions and please do no fixing on your own or running of scanners unless requested by me or another helper.

Please download ComboFix from

Here or Here to your Desktop.

**Note: In the event you already have Combofix, this is a new version that I need you to download. It is important that it is saved and renamed following this process directly to your desktop**

  1. If you are using Firefox, make sure that your download settings are as follows:
    • Open Tools -> Options -> Main tab
    • Set to Always ask me where to Save the files.

[*]During the download, rename Combofix to Combo-Fix as follows:

CF_download_FF.gif

CF_download_rename.gif

[*]It is important you rename Combofix during the download, but not after.

[*]Please do not rename Combofix to other names, but only to the one indicated.

[*]Close any open browsers.

[*]Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.

-----------------------------------------------------------

  • Very Important! Temporarily disable your anti-virus, script blocking and any anti-malware real-time protection before performing a scan. They can interfere with ComboFix or remove some of its embedded files which may cause unpredictable results.
  • Click on this link to see a list of programs that should be disabled. The list is not all inclusive. If yours is not listed and you don't know how to disable it, please ask.

    -----------------------------------------------------------


  • Close any open browsers.
  • WARNING: Combofix will disconnect your machine from the Internet as soon as it starts
  • Please do not attempt to re-connect your machine back to the Internet until Combofix has completely finished.
  • If there is no internet connection after running Combofix, then restart your computer to restore back your connection.

-----------------------------------------------------------

[*]Double click on combo-Fix.exe & follow the prompts.

[*]When finished, it will produce a report for you.

[*]Please post the C:\Combo-Fix.txt for further review.

**Note: Do not mouseclick combo-fix's window while it's running. That may cause it to stall**

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.