12007, 0, WinHttpSendRequest

[horselvr]

I installed malwarebytes and can not update. I ran a tracer like I found on one post and have attached it. I have reset my router and tried that theory and no results. I also tried to install it on my sons laptop, and I get the same message on his. Frustrated! Any help would be much appreciated. Thanks!

traceroute_malwarebytes_cdn.txt

[yardbird]

Hi horselvr, Welcome to Malwarebytes Lets do a clean tool removal of Malwarebytes & re-install it.

Please do the following to see if it resolves the issue: Post back and let us know please

To Fully Remove and Reinstall a Fresh New Copy of Malwarebytes - Read Carefully

Windows XP:

• Click on Start and select Control Panel
  
• Open Add/Remove Programs
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from Here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from Here

Windows Vista and Windows 7:

• Click on the Start button and select Control Panel
  
• Click on Programs and Features
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from Here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from Here

Note: You will need to reactivate the program using the license you were sent via email if using the Paid version only

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now reset any file exclusions as may be required in your Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications.

You may use the guides posted in the FAQ's here or ask us and we will explain how to do it.

Thank You

[yardbird]

@ horselvr

I would like you to run the following as yours is not complete, but do post # 2 above and let us know if it works?

If you still have problems please follow these steps -

Here are some steps to diagnose update issues:

Step 1

First - Click on this link and let me know what it says. It should be just a 4-digit number in the upper-left corner.

This should be less than 4731

Step 2

Next - Please download and run the traceroute utility at this link. It will run a traceroute to our update servers to see if it can find the connection issue, and then it will write it to a log, and open that log in Notepad when it is done. Please either save the log as a Text File and then attach it to a reply, or copy and paste it into a reply, and I will forward it on to our server guy.

Note that it may take several minutes to run, and it may look like it is not doing anything for a few minutes. Normally it takes longer when there are errors that it has to log, but it's rare for it to go more than 10 minutes.

Step 3

Please download TCPView from Microsoft at this link.

This utility will monitor everything that is accessing the Internet or your local network. All you have to do is run TCPView, and then run Malwarebytes' Anti-Malware and start the update. Watch TCPView to see if mbam.exe shows up in the list. It will be pretty obvious, because it highlights it in green.

I need to know what "Remote Address" Malwarebytes' Anti-Malware is trying to connect to. Once it shows up in the list, you can right-click on the line for mbam.exe, and select 'Copy' in order to paste it into a reply. It will tell me what I need to know. Below is an example of what the line you are looking for will look like inside the following code box:

mbam.exe:3656	TCP	vista-x64:52135	cdn-208-111-168-7.ord.llnw.net:http	ESTABLISHED

Thank You -