Malwarebytes will not load

[txstoby]

All of a sudden Malwarebytes will not load. The little circle just keep spinning and then all I can do is to reboot the computer. Any suggestions?

[noknojon]

Welcome txstoby -

First reinstall your copy of Malwarebytes with these instructions - As you do not list your Operating System I have covered all versions here -

This may just be a minor glitch with your copy of the program - Also please check your updates - Version 4304 is current -

Also please post back with your Antivirus program and any Firewall installed as this may also be a problem -

To Fully Remove and Reinstall a Fresh New Copy of Malwarebytes - Read Carefully

Windows XP:

• Click on Start and select Control Panel
  
• Open Add/Remove Programs
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only -

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Windows Vista and Windows 7:

• Click on the Start button and select Control Panel
  
• Click on Programs and Features
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now reset any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications.

You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Thank You -

[txstoby]

Welcome txstoby -

First reinstall your copy of Malwarebytes with these instructions - As you do not list your Operating System I have covered all versions here -

This may just be a minor glitch with your copy of the program - Also please check your updates - Version 4304 is current -

Also please post back with your Antivirus program and any Firewall installed as this may also be a problem -

To Fully Remove and Reinstall a Fresh New Copy of Malwarebytes - Read Carefully

Windows XP:

• Click on Start and select Control Panel
  
• Open Add/Remove Programs
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only -

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Windows Vista and Windows 7:

• Click on the Start button and select Control Panel
  
• Click on Programs and Features
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now reset any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications.

You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Thank You -

[txstoby]

Thanks for your reply. I am running Windows 7 Home Premium. I followed your instructions and clicked uninstall but nothing happened. Prior to that I attempted a system restore and when I clicked restore, again nothing happened, no scan took place. Thanks for your help.

[noknojon]

Hi again -

Exactly what happened when you did these first instructions - Anything or ??

Windows Vista and Windows 7:

• Click on the Start button and select Control Panel
  
• Click on Programs and Features
  
• Uninstall Malwarebytes' Anti-Malware
  
• Restart your computer very important !
  
• Download and run mbam-clean.exe from here
  

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now reset any file exclusions as may be required in your Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications.

You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Thank You -

EDIT - Use the ADD REPLY Tab at the bottom of the page please -

[txstoby]

When I clicked uninstall, nothing happened... nothing. I waited and clicked it again but again nothing happened. Now the start button will not work at all. To turn off the computer I will have to just press the power button and Firefox freezes up every few minutes. I have to use task manager to shut it down and then restart it.

Again, thanks for your assistance.

[noknojon]

You may have had a recent minor infection that altered your settings - Please try this next - Make sure you are logged on as administrator -

STEP 01

Open Internet Explorer

• Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other internet browser
  
• Click on Tools at the top and select Internet Options
  
• Note: If you do not see Tools, press the Alt key on your keyboard and it will show up
  
• Click on the Connections tab
  
• Click on the LAN settings button
  
• Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it
  
• Click on the OK button to close the Local Area Network (LAN) Settings window
  
• Click on the OK button to close the Internet Options window
  
• Use this diagram as a guide-
  
• Try updating Malwarebytes' Anti-Malware again and if it does not work then please proceed to Step 02
  

STEP 02

Disable Internet Explorer Proxy Settings and Reset TCP/IP

It is very important that these steps be carried out exactly as shown otherwise the fix will not work.

If you have any questions please ask before moving on.

• Please start Notepad and using your mouse make sure you select and copy all the information below in the Code box into your new document.
  
• Then save the file as "fixme.bat" to your Desktop - The .bat extension is important
  
• In the drop down box for Save as type: make sure you select All Files (*.*) and keep the quotes on the name as well. Then close the new file.
  

  @ECHO OFF
  reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyServer /f
  reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyOverride /f
  reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable  /t REG_DWORD /d 0 /f
  reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f
  netsh int ip reset resetlog.txt

  
  

• On Windows XP you can double-click the file to run it.
  
• On Vista/Win7 you need to Right click the file and choose Run as administrator to run it. With User Account Control on it should ask permission to run it.
  Click Yes
  
• This will flash a black DOS box very quickly and go away, this is normal.
  
• Restart your computer now.
  
• Launch Internet Explorer and see if you can connect to the Internet.
  
• Launch MBAM and check for Updates
  

STEP 03

Ping the Content Delivery Network

For Windows Vista or Windows 7:

Click on START and in the search line type in CMD and you should see cmd.exe show on the menu. Right click over cmd.exe and select Run as administrator

Then in the DOS console window type in the following and press the Enter key and verify that you get a response

PING mbam-cdn.malwarebytes.org

If all the ping failed then please try running the following command

TRACERT mbam-cdn.malwarebytes.org

Then copy and paste back the results on your next reply.

Thank You -

[txstoby]

I really appreciate your efforts on my behalf. However, IE8 will not work. I have tried to reset the options to default but it will not load, I have a blank screen. I ran scans of my computer at least twice a week with Malwarebytes and Spybot as well as AVG paid. The problem with IE8 began about a week ago. Because it will not load I can not get the report of my Hijackthis scan. However my problems seemed to ramp up yesterday when I tried to run a Malwarebytes scan. That is the first time that the screen froze while opening Malwarebytes.

I am online with another computer as the computer with the problems will now not work with Firefox or IE8.

[noknojon]

Hi -

It looks like an infection has locked into your system - Even if you can get safe mode to run please try to get our experts to fix your problem -

They can do some removal/diagnosing from safe mode if you can get it to start -

Please print out, read and follow the directions here, skipping any steps you are unable to complete. Then post a NEW topic here.

One of the expert helpers there will give you one-on-one assistance when one becomes available.

After posting your new post make sure under options that you select Track this topic and choose one of the Email options so that you're alerted when someone has replied to your post - Please allow at least 48 hours for a reply as the experts can get busy at times -

Also add a brief note to the experts as to your problems -

Alternatively, as a paying customer, you can contact the help desk at support@malwarebytes.org or via Here

Always use the ADD REPLY Tab at the bottom of the page when you reply -

Thank You -