Jump to content

Problems Updating Malwarebytes. Please respond


Recommended Posts

I have been unable to update the free version of Malwarebytes for about two weeks. Today I uninstalling the program then downloading re-installing it again.

When I tried to update it after doing that it would not let me update and I got the following error message 732 (12029,0).

My dad has the same program on his computer and has had no problems with it !

Link to post
Share on other sites

I have been unable to update the free version of Malwarebytes for about two weeks. Today I uninstalling the program then downloading re-installing it again.

When I tried to update it after doing that it would not let me update and I got the following error message 732 (12029,0).

My dad has the same program on his computer and has had no problems with it !

Please help ! Thank you !

Link to post
Share on other sites

I have been unable to update the free version of Malwarebytes for about two weeks. Today I uninstalling the program then downloading re-installing it again.

When I tried to update it after doing that it would not let me update and I got the following error message 732 (12029,0).

My dad has the same program on his computer and has had no problems with it !

Please help ! Thank you !

Why do you have to create this thread, when there

Link to post
Share on other sites

Hello,

Please try this on the computer that is having an issue.

1. Uninstall Malwarebytes' Anti-Malware using Add/Remove programs in the control panel.

2. Restart your computer (very important).

3. Download and run this utility. mbam-clean.exe

4. It will ask to restart your computer (please allow it to).

5. After the computer restarts, install the latest version from here. mbam-setup.exe

Note: You will need to reactivate the program using the license you were sent

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray and that you can run a quick scan and all is working as expected.

Take a look at the following link. Error Code 732 - Internet Explorer 8, Possible Fix

Link to post
Share on other sites

Hi aew31 -

Please check in Internet Explorer > Files > that the setting is not for Work Offline - If this setting has a tick next to it please Uncheck the tick and then try to update again - I would post the one for F/fox but I have I.E. open at this time -

Thank You - :rolleyes:

Link to post
Share on other sites

Hello,

Please try this on the computer that is having an issue.

1. Uninstall Malwarebytes' Anti-Malware using Add/Remove programs in the control panel.

2. Restart your computer (very important).

3. Download and run this utility. mbam-clean.exe

4. It will ask to restart your computer (please allow it to).

5. After the computer restarts, install the latest version from here. mbam-setup.exe

Note: You will need to reactivate the program using the license you were sent

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray and that you can run a quick scan and all is working as expected.

Take a look at the following link. Error Code 732 - Internet Explorer 8, Possible Fix

I downloaded but cant run mbam-clean.exe

Link to post
Share on other sites

@ aew31 -

Please make sure you reboot between each operation -

To Fully Remove and Reinstall a Fresh New Copy of Malwarebytes - Read Carefully

Windows XP:

  • Click on Start and select Control Panel
  • Open Add/Remove Programs
  • Uninstall Malwarebytes' Anti-Malware
  • Restart your computer very important !
  • Download and run mbam-clean.exe from here

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only -

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now setup any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications. You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Windows Vista and Windows 7:

  • Click on the Start button and select Control Panel
  • Click on Programs and Features
  • Uninstall Malwarebytes' Anti-Malware
  • Restart your computer very important !
  • Download and run mbam-clean.exe from here

It will ask to restart your computer, please allow it to do so, very important

After the computer restarts, temporarily disable your Anti-Virus and install the latest version of Malwarebytes' Anti-Malware from here

Note: You will need to reactivate the program using the license you were sent via email if using the Pro version only

Launch the program and set the Protection and Registration. Then go to the UPDATE tab if not done during installation and check for updates.

Restart the computer again and verify that MBAM is in the task tray if using the Pro version. Now reset any file exclusions as may be required in your

Anti-Virus/Internet-Security/Firewall applications and restart your Anti-Virus/Internet-Security applications.

You may use the guides posted in the FAQ's here or ask me and I'll explain how to do it.

Thank You - :rolleyes:

Link to post
Share on other sites

This is the full version of a repair for 732(12029) error message - If this will not fix it then you must have a Blocking Infection -

As long as it is NOT due to current live Malware preventing the update then this method may help restore the ability to run updates

After each step please try to run the Update again in the MBAM program.

STEP 01

Backup the Registry:

Modifying the Registry can create unforeseen problems, so it always wise to create a backup before doing so.

  • Please download ERUNT from here
  • ERUNT (Emergency Recovery Utility NT) is a free program that allows you to keep a complete backup of your registry and restore it when needed.
  • Double click on erunt-setup.exe to Install ERUNT by following the prompts.
  • Use the default install settings but say NO to the portion that asks you to add ERUNT to the Start-Up folder. You can enable this option later if you wish.
  • Start ERUNT either by double clicking on the desktop icon or choosing to start the program at the end of the setup process.
  • Choose a location for the backup.
  • Note: the default location is C:\Windows\ERDNT which is acceptable.
  • Make sure that at least the first two check boxes are selected.
  • Click on OK
  • Then click on YES to create the folder.

Note: if it is necessary to restore the registry, open the backup folder and start ERDNT.exe

Once you've completed backing up your Registry, please perform the following fixes until fixed or all methods have been tried

  • Open Internet Explorer
  • Note: It MUST be Internet Explorer, not Firefox, Opera, Chrome or any other internet browser
  • Click on Tools at the top and select Internet Options
  • Note: If you do not see Tools, press the Alt key on your keyboard and it will show up
  • Click on the Connections tab
  • Click on the LAN settings button
  • Under Automatic configuration make sure that the box next to Automatically detect settings is checked, if it is not, then click the box next to it to check it
  • Click on the OK button to close the Local Area Network (LAN) Settings window
  • Click on the OK button to close the Internet Options window
  • Use this diagram as a guide
  • Try updating Malwarebytes' Anti-Malware again and if it does not work then please proceed to Step 02

STEP 02

Disable Internet Explorer Proxy Settings and Reset TCP/IP

It is very important that these steps be carried out exactly as shown otherwise the fix will not work.

If you have any questions please ask before moving on.

  • Please start Notepad and using your mouse make sure you select and copy all the information below in the Code box into your new document.
  • Then save the file as "fixme.bat" to your Desktop - The .bat extension is important
  • In the drop down box for Save as type: make sure you select All Files (*.*) and keep the quotes on the name as well. Then close the new file.
    @ECHO OFF
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyServer /f
    reg delete "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyOverride /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v ProxyEnable /t REG_DWORD /d 0 /f
    reg add "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v GlobalUserOffline /t REG_DWORD /d 0 /f
    netsh int ip reset resetlog.txt


  • On Windows XP you can double-click the file to run it.
  • On Vista/Win7 you need to Right click the file and choose Run as administrator to run it. With User Account Control on it should ask permission to run it. Click Yes
  • This will flash a black DOS box very quickly and go away, this is normal.
  • Restart your computer now.
  • Launch Internet Explorer and see if you can connect to the Internet.
  • Launch MBAM and check for Updates

STEP 03

Ping the Content Delivery Network

For Windows XP:

Click on START - RUN and type in or Copy/Paste the following and verify that you get a response

CMD.EXE /K PING mbam-cdn.malwarebytes.org

For Windows Vista or Windows 7:

Click on START and in the search line type in CMD and you should see cmd.exe show on the menu. Right click over cmd.exe and select Run as administrator

Then in the DOS console window type in the following and press the Enter key and verify that you get a response

PING mbam-cdn.malwarebytes.org

If all the pings failed then please try running the following command

TRACERT mbam-cdn.malwarebytes.org

Then copy and paste back the results on your next reply.

STEP 04

Exclude Malwarebytes' Anti-Malware's Files and Folders From Other Active Security Programs:

For Windows XP:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For Windows Vista or Windows 7:

  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\System32\drivers\mbamswissarmy.sys

For 64 bit versions of Windows Vista or Windows 7:

  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamservice.exe
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\zlib.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbam.dll
  • C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamext.dll
  • C:\ProgramData\Malwarebytes\Malwarebytes' Anti-Malware\rules.ref
  • C:\Windows\System32\drivers\mbam.sys
  • C:\Windows\SysWoW64\drivers\mbamswissarmy.sys

Note: If using a software firewall besides the built in Windows Firewall you'll need to exclude MBAM.EXE from it as well

The FAQ contains examples of setting file exclusions for some known AV products -

EDIT -PLEASE use the ADD REPLY Tab (at the botom) when responding

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.