JessicaJones Posted September 27 ID:1663609 Share Posted September 27 Hi, I have been struggling to get rid of a clipboard hijacker which changes my LTC address whenever I copy and paste it. I have seen a thread here with a similar problem here, it seems that someone gave him a script to remove it that only work for his device. I have ran Malwarebytes advanced scan for all hard drives connected to my desktop, it ran for almost 5 days, got 54 detections, all quarantined but sadly after the restart the clipboard hijacker is still there. Can someone help me? Attached support log below. thread with similar problem below. https://forums.malwarebytes.com/topic/298553-i-have-a-clipboard-hijacker/ mbst-grab-results.zip Link to post Share on other sites More sharing options...
Porthos Posted September 27 ID:1663610 Share Posted September 27 @JessicaJones Although I will not be directly assisting you, a malware removal expert will be along to assist after you do the following. Let's get the info to get the process started. Be aware it will take many steps and scans to fully remove malware. Please respond to all future instructions from your helper in a timely manner. Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process Then follow each step in the order provided. Unless otherwise asked, please attach all logs Please make the following system changes: Please pay close attention the the instructions in all of the following links. If you have not done so already - Enable System Protection and create a NEW System Restore Point <<<<< Important. Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the downloads are completed Disable-Fast-Startup Windows 8 and newer only <<<<< Important. Show-Hidden-Folders-Files-Extensions Please run the following scans: Please pay close attention the the instructions in all of the following links. Click the following link and run a Scan with AdwCleaner Click the following link and run a Scan with Malwarebytes RESTART the computer <<<<< Important. Click the following link and run a Scan with Farbar Recovery Scan Tool Example image of where to click to attach files when posting your reply Then be patient for the next expert to take your case. <<<<< Important. Thank you Link to post Share on other sites More sharing options...
JessicaJones Posted September 27 Author ID:1663631 Share Posted September 27 Attached below all scan logs following your guides, thanks. AdwCleaner[C00].txt Malwarebytes Scan Report 2024-09-27 151358.txt Addition.txt FRST.txt Link to post Share on other sites More sharing options...
Solution JSntgRvr Posted September 27 Solution ID:1663634 Share Posted September 27 (edited) Welcome I'll be helping you with your computer. Please read this post completely before beginning. If there's anything that you do not understand, please don't hesitate to ask before proceeding. Please take note of the guidelines for this fix: Please note that I am a volunteer. I do have a family, a career, and other endeavors that may prevent immediate responses that meet your schedule. Do note that the differences in time zones could present a problem as well. Your patience and understanding will be greatly appreciated. First of all, the procedures we are about to perform are specific to your problem and should only be used on this specific computer. Do not make any changes to your computer that include installing/uninstalling programs, deleting files, modifying the registry, nor running scanners or tools of any kind unless specifically requested by me. Please read ALL instructions carefully and perform the steps fully and in the order they are written. If things appear to be better, let me know. Just because the symptoms no longer exist as before, does not mean that you are clean. Continue to read and follow my instructions until I tell you that your machine is clean. If you have any questions at all, please do not hesitate to ask before performing the task that I ask of you, and please wait for my reply before you proceed. Scanning with programs and reading the logs do take a fair amount of time. Again, your patience will be necessary. Let's begin... AdwCleaner and the Antimalware did a great job. Let run a script to review some of the settings: The following Fix will empty these folders: Windows Temp Users Temp folders Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History Recently opened files cache Discord cache Java cache Steam HTML cache Explorer thumbnail and icon cache BITS transfer queue (qmgr*.dat files) Recycle Bin Hosts file will be reset Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns, please ask before running this fix. The system will be rebooted after the fix has run. FRST64 was saved as C:\Users\dell\Downloads\Programs\FRSTEnglish.exe Download the enclosed file Fixlist.txt Save it in the same location FRST64 is saved. (FRSTEnglish.exe) Start FRST (FRST64) with Administrator privileges This time around Press the Fix button and wait When finished, a log file (Fixlog.txt) will pop up and saved in the same location the tool was ran from. Please attach this file in your next reply. Please run the following ESET Online Scanner and perform a Full Scan Click the following link to save the installer for ESET Online Scanner https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe It will start a download of "esetonlinescanner.exe" Save the file to your system, such as the Downloads folder, or else to the Desktop. Go to the saved file, and double click it to get started. When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue When prompted for scan type, Click on the Full Scan button Enable ( select ) the radio selection "Enable ESET to detect and quarantine potentially unwanted applications" and click the Start scan button. Have patience. The entire process may take a few hours or more. When the scan is completed, if something was found, it will show a screen with the number of detected items. If so, click the button marked “View detected results”. Click The blue “Save scan log” to save the log and give it a name and location you remember. If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files” ( in blue, at the bottom). Press Continue when all done. You should click to turn off the offer for “periodic scanning”. Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program. Note: If you do need to do a File Restore from ESET please follow the directions below [KB2915] Restore files quarantined by the ESET Online Scanner version 3 https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner Please attach the ESET scan log you saved at the end to your next reply Edited September 27 by JSntgRvr typo Link to post Share on other sites More sharing options...
JessicaJones Posted September 28 Author ID:1663700 Share Posted September 28 Attached logs for both scans. I have noticed now that I can copy my LTC address and it doesn't change so the virus appear to be gone, I can't thank you enough. Let me know what else I have to do. Fixlog.txt ESET Scan LOG.txt Link to post Share on other sites More sharing options...
JSntgRvr Posted September 28 ID:1663791 Share Posted September 28 Windows Resource Protection found corrupted files and successfully repaired them. FRST64 was saved as C:\Users\dell\Downloads\Programs\FRSTEnglish.exe Download the enclosed file Fixlist.txt Save it in the same location FRST64 is saved. (FRSTEnglish.exe) Start FRST (FRST64) with Administrator privileges This time around Press the Fix button and wait When finished, a log file (Fixlog.txt) will pop up and saved in the same location the tool was ran from. Please attach this file in your next reply. Lets try another scanner: Dr.Web CureIt! Please download the Dr.Web CureIt! anti-virus utility https://free.drweb.com/ You will need to send them an email to obtain a link to download the scanner, please do so The downloaded file will normally have a unique name such as: q7a9tr4p.exe Close all open applications and locate the downloaded file and double-click to run it The program will take a moment to launch and bring up the License and Update screen Place a check mark to agree to the terms and then click on the Continue button Click the underlined link Select objects for scanning On the top left click the Scanning objects that should automatically check all objects Click the small wrench and make sure there is a check on Automatically apply actions to threats Then click the large button on bottom right Start scanning Once the scan has completed there will be a link named Open report click that and a log named cureit.log should open in Notepad The log is saved in the folder named Doctor Web in the top of your user profile folders Please attach that log on your next reply Link to post Share on other sites More sharing options...
Root Admin AdvancedSetup Posted Tuesday at 02:13 AM Root Admin ID:1665414 Share Posted Tuesday at 02:13 AM Due to the lack of feedback, this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request. This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread. Tips to help protect from infection Thanks Link to post Share on other sites More sharing options...
Recommended Posts