Jump to content

Possible Cryptominer - GPU Clock and Memory Clock at Max always

Xeno1234
 Share

Recommended Posts

Porthos

Porthos

Posted
Posted

@Xeno1234

Although I will not be directly assisting you, a malware removal expert will be along to assist after you do the following.

Let's get the info to get the process started. Be aware it will take many steps and scans to fully remove malware.

Please respond to all future instructions from your helper in a timely manner.

Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process

Then follow each step in the order provided. Unless otherwise asked, please attach all logs

 

Please make the following system changes: Please pay close attention the the instructions in all of the following links.

  • If you have not done so already - Enable System Protection and create a NEW System Restore Point  <<<<< Important.
  • Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the downloads are completed
  • Disable-Fast-Startup   Windows 8 and newer only <<<<< Important.
  • Show-Hidden-Folders-Files-Extensions

Please run the following scans: Please pay close attention the the instructions in all of the following links.

  1. Click the following link and run a  Scan with AdwCleaner
  2. Click the following link and run a  Scan with Malwarebytes
       RESTART the computer <<<<< Important.
  3. Click the following link and run a  Scan with Farbar Recovery Scan Tool 

Example image of where to click to attach files when posting your reply

image.thumb.png.e208c182ff570799c53bcf57

Then be patient for the next expert to take your case. <<<<< Important.

 

Thank you

Link to post
Share on other sites
MKDB

MKDB

Posted
Posted

Hello  @Xeno1234  and  :welcome:

 

My name is MKDB and I will assist you.

 

 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow the steps in the given order and post back the log files.
  • Please attach all log files into your post.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Only run the tools I guide you to. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • As English is not my native language, please do not use slang or idioms. It may be hard for me to understand.
  • If you do not respond within 4 days, your topic will be closed.
  • Cracked or hacked or pirated programs are not only illegal, but also will make a computer a malware victim. Having such programs installed, is the easiest way to get infected. It is the leading cause of ransomware encryptions. It is at times also a big source of current trojan infections. If you are running any kin of illegal software on your system, please uninstall them now, before we start the cleaning procedure.

 

 

Please attach the requested logfiles for a first analysis and we will be happy to help you.

Thank you!

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
11 hours ago, MKDB said:

Hello  @Xeno1234  and  :welcome:

 

My name is MKDB and I will assist you.

 

 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow the steps in the given order and post back the log files.
  • Please attach all log files into your post.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Only run the tools I guide you to. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • As English is not my native language, please do not use slang or idioms. It may be hard for me to understand.
  • If you do not respond within 4 days, your topic will be closed.
  • Cracked or hacked or pirated programs are not only illegal, but also will make a computer a malware victim. Having such programs installed, is the easiest way to get infected. It is the leading cause of ransomware encryptions. It is at times also a big source of current trojan infections. If you are running any kin of illegal software on your system, please uninstall them now, before we start the cleaning procedure.

 

 

Please attach the requested logfiles for a first analysis and we will be happy to help you.

Thank you!

 

Addition.txt FRST.txt Malwarebytes Scan Report 2024-09-01 175124.txt AdwCleaner[S02].txt

Link to post
Share on other sites
MKDB

MKDB

Posted
Posted

@Xeno1234

Let's run the following cleanup script with FRST. This may take some time, please be very patient.

 

 

  • Please download the attached fixlist.txt file and save it to the location where you ran FRST from ( C:\Users\vanar\Downloads\ ).

Note: It's important that both files, FRST and fixlist.txt are in the same location or the fix will not work.

  • Close all open programs and save your work.
  • Run FRST again.
  • Press the FIX button only once and wait.
  • Please be patient and do not interfere, even if FRST does not respond for some time. That's nothing to worry about.
  • Please note: This Fix will remove all temporary files, empty recycle bin and will remove cookies and may result in some websites indicating they do not recognize your computer. It may be necessary to receive and apply a verification code.
  • Please note: This step resets your Firewall settings and you may be asked later to grant permission for legitimate programs to pass through the Firewall. If you recognize the program, agree to the request.
  • If the tool needs a restart, please make sure you let the system restart normally and let the tool complete its run after restart.
  • FRST will create one log now (Fixlog.txt) in the same directory the tool is run. Please attach this logfile to your next reply.

 

 

 

fixlist.txt

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
2 hours ago, MKDB said:

@Xeno1234

Let's run the following cleanup script with FRST. This may take some time, please be very patient.

 

 

  • Please download the attached fixlist.txt file and save it to the location where you ran FRST from ( C:\Users\vanar\Downloads\ ).

Note: It's important that both files, FRST and fixlist.txt are in the same location or the fix will not work.

  • Close all open programs and save your work.
  • Run FRST again.
  • Press the FIX button only once and wait.
  • Please be patient and do not interfere, even if FRST does not respond for some time. That's nothing to worry about.
  • Please note: This Fix will remove all temporary files, empty recycle bin and will remove cookies and may result in some websites indicating they do not recognize your computer. It may be necessary to receive and apply a verification code.
  • Please note: This step resets your Firewall settings and you may be asked later to grant permission for legitimate programs to pass through the Firewall. If you recognize the program, agree to the request.
  • If the tool needs a restart, please make sure you let the system restart normally and let the tool complete its run after restart.
  • FRST will create one log now (Fixlog.txt) in the same directory the tool is run. Please attach this logfile to your next reply.

 

 

 

fixlist.txt 2.97 kB · 0 downloads

Sure! I'll run this?
Do you see any infection, or rather a technical issue causing the GPU clock?

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
2 hours ago, MKDB said:

@Xeno1234

Let's run the following cleanup script with FRST. This may take some time, please be very patient.

 

 

  • Please download the attached fixlist.txt file and save it to the location where you ran FRST from ( C:\Users\vanar\Downloads\ ).

Note: It's important that both files, FRST and fixlist.txt are in the same location or the fix will not work.

  • Close all open programs and save your work.
  • Run FRST again.
  • Press the FIX button only once and wait.
  • Please be patient and do not interfere, even if FRST does not respond for some time. That's nothing to worry about.
  • Please note: This Fix will remove all temporary files, empty recycle bin and will remove cookies and may result in some websites indicating they do not recognize your computer. It may be necessary to receive and apply a verification code.
  • Please note: This step resets your Firewall settings and you may be asked later to grant permission for legitimate programs to pass through the Firewall. If you recognize the program, agree to the request.
  • If the tool needs a restart, please make sure you let the system restart normally and let the tool complete its run after restart.
  • FRST will create one log now (Fixlog.txt) in the same directory the tool is run. Please attach this logfile to your next reply.

 

 

 

fixlist.txt 2.97 kB · 0 downloads

 

Fixlog.txt

Link to post
Share on other sites
MKDB

MKDB

Posted
Posted

@Xeno1234

The FRST logfiles do currently not show any kind of infection.

 

Let's run Dr.Web as a second opinion, please.

 

 

Please download the Dr.Web CureIt! anti-virus utility
https://free.drweb.com/

You will need to send them an email to obtain a link to download the scanner, please do so

  • The downloaded file will normally have a unique name such as:  q7a9tr4p.exe
  • Close all open applications and locate the downloaded file and double-click to run it
  • The program will take a moment to launch and bring up the License and Update screen
  • Place a check mark to agree to the terms and then click on the Continue button
  • Click the underlined link Select objects for scanning
  • On the top left click the Scanning objects that should automatically check all objects
  • Click the small wrench and make sure there is a check on Automatically apply actions to threats
  • Then click the large button on bottom right Start scanning
  • Once the scan has completed there will be a link named Open report click that and a log named cureit.log should open in Notepad
  • The log is saved in the folder named Doctor Web in the top of your user profile folders
  • Please attach that log on your next reply.

 

 

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
8 hours ago, MKDB said:

@Xeno1234

The FRST logfiles do currently not show any kind of infection.

 

Let's run Dr.Web as a second opinion, please.

 

 

Please download the Dr.Web CureIt! anti-virus utility
https://free.drweb.com/

You will need to send them an email to obtain a link to download the scanner, please do so

  • The downloaded file will normally have a unique name such as:  q7a9tr4p.exe
  • Close all open applications and locate the downloaded file and double-click to run it
  • The program will take a moment to launch and bring up the License and Update screen
  • Place a check mark to agree to the terms and then click on the Continue button
  • Click the underlined link Select objects for scanning
  • On the top left click the Scanning objects that should automatically check all objects
  • Click the small wrench and make sure there is a check on Automatically apply actions to threats
  • Then click the large button on bottom right Start scanning
  • Once the scan has completed there will be a link named Open report click that and a log named cureit.log should open in Notepad
  • The log is saved in the folder named Doctor Web in the top of your user profile folders
  • Please attach that log on your next reply.

 

 

 

cureit.log

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Thank you for the log @Xeno1234

The Dr. Web Cureit scanner found no threats

 

Please RESTART the computer one more time and get me some NEW fresh logs to review.

 

Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/


Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/


Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/

 

 

Thank you

 

 

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
23 hours ago, AdvancedSetup said:

Thank you for the log @Xeno1234

The Dr. Web Cureit scanner found no threats

 

Please RESTART the computer one more time and get me some NEW fresh logs to review.

 

Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/


Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/


Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/

 

 

Thank you

 

 

 

Addition.txt FRST.txt FSS.txt SecurityCheck.txt

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Thank you for the logs @Xeno1234

No signs of infection.

You are running a service out of the temp folder which is not good. You should delete that service and reinstall to a fixed folder if you want to keep this.

R3 cpuz158; C:\Windows\temp\cpuz158\cpuz158_x64.sys [44576 2024-09-01] (Microsoft Windows Hardware Compatibility Publisher -> CPUID) <==== ATTENTION

From an elevated admin command prompt you can run the following command to remove it. 

SC DELETE CPUZ158

 

 


Please Uninstall, Update, or otherwise address the following as appropriate for your computer

  1. 7-Zip 24.01 (x64) v.24.01 Warning! Download Update | Uninstall old version and install new one.
  2. Audacity 3.4.2 v.3.4.2 Warning! Download Update
  3. Discord v.1.0.9037 Warning! Download Update
  4. Microsoft Visual Studio Code v.1.78.1 Warning! Download Update

 

Once the above items have been addressed we should be done here.

 

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well.

Please follow the directions below to remove the logs and tools we've used. If any are still left after that you can manually uninstall or delete them.

Take care and stay safe out there. Try to follow as much of the advise below as you can as well.

 

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt. You can close it.

 

We're glad that we were able to assist you.

 

The following information will help you to keep your computer and data safer as well as improve your overall privacy

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/780233/best-password-manager/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download     https://patchmypc.com/about-us
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Cybersecurity basics & protection
Everything you need to know about cybercrime
https://www.malwarebytes.com/cybersecurity

 

Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

 

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
3 hours ago, AdvancedSetup said:

Thank you for the logs @Xeno1234

No signs of infection.

You are running a service out of the temp folder which is not good. You should delete that service and reinstall to a fixed folder if you want to keep this.

R3 cpuz158; C:\Windows\temp\cpuz158\cpuz158_x64.sys [44576 2024-09-01] (Microsoft Windows Hardware Compatibility Publisher -> CPUID) <==== ATTENTION

From an elevated admin command prompt you can run the following command to remove it. 

SC DELETE CPUZ158

 

 


Please Uninstall, Update, or otherwise address the following as appropriate for your computer

  1. 7-Zip 24.01 (x64) v.24.01 Warning! Download Update | Uninstall old version and install new one.
  2. Audacity 3.4.2 v.3.4.2 Warning! Download Update
  3. Discord v.1.0.9037 Warning! Download Update
  4. Microsoft Visual Studio Code v.1.78.1 Warning! Download Update

 

Once the above items have been addressed we should be done here.

 

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well.

Please follow the directions below to remove the logs and tools we've used. If any are still left after that you can manually uninstall or delete them.

Take care and stay safe out there. Try to follow as much of the advise below as you can as well.

 

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt. You can close it.

 

We're glad that we were able to assist you.

 

The following information will help you to keep your computer and data safer as well as improve your overall privacy

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/780233/best-password-manager/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download     https://patchmypc.com/about-us
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Cybersecurity basics & protection
Everything you need to know about cybercrime
https://www.malwarebytes.com/cybersecurity

 

Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

 

Whenever I try to turn my PC off it says virtual box interface has active connections. I don't have virtual box installed. Could you all try to fix what this is?

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

We can try. @Xeno1234

Please go ahead and RESTART the computer one more time.

Then get me new, fresh logs

 

Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/


Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/


Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/


Scan with Malwarebytes
https://forums.malwarebytes.com/topic/304827-scan-with-malwarebytes/


Scan with AdwCleaner
https://forums.malwarebytes.com/topic/304822-scan-with-adwcleaner/

 

Thank you

 

 

 

 

Link to post
Share on other sites
Xeno1234

Xeno1234

Posted
  • Author
Posted
23 hours ago, AdvancedSetup said:

We can try. @Xeno1234

Please go ahead and RESTART the computer one more time.

Then get me new, fresh logs

 

Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/


Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/


Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/


Scan with Malwarebytes
https://forums.malwarebytes.com/topic/304827-scan-with-malwarebytes/


Scan with AdwCleaner
https://forums.malwarebytes.com/topic/304822-scan-with-adwcleaner/

 

Thank you

 

 

 

 

I found the issue. It’s blue stacks - it’s not malware. So I guess I’m clean then. 
 

Is there anything you all can do about the locked at max gpu clocks?

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

For specific GPU tuning I'd recommend you seek assistance from a forum dedicated to GPU tuning

There are many, but perhaps one like this?

https://www.overclock.net/forums/graphics-cards-general.74/

 

 

Excellent, glad to hear all is well again. I'll go ahead and close your topic now and wish you well.

Please follow the directions below to remove the logs and tools we've used. If any are still left after that you can manually uninstall or delete them.

Take care and stay safe out there. Try to follow as much of the advise below as you can as well.

 

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt. You can close it.

 

We're glad that we were able to assist you.

 

The following information will help you to keep your computer and data safer as well as improve your overall privacy

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/780233/best-password-manager/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download     https://patchmypc.com/about-us
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Cybersecurity basics & protection
Everything you need to know about cybercrime
https://www.malwarebytes.com/cybersecurity

 

Further reading if you'd like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes. Please tell your friends and family if they too need assistance with malware removal

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.