Jump to content

iSCSI Drive read speed impacted by malwarebytes


Recommended Posts

Hi

I have just setup a iscis drive and had been getting very slow reads from the drive of 12Gb/s, After disabling malwarebytes the read speed jumps up to 22Gb/s. 

Is there a way to add this link to be ignored by malwarebyte, I have looked into the add options but am unable to get anything to work ; I expect I am trying to add the wrong rule. The iscis share is a direct link to the windows 10 machine with static IP's and uses windows iscsi initiator. 

Thanks. 

Link to post
Share on other sites

@DashApple

Please do the following so that we may take a closer look at your system.

 

Disable-Fast-Startup <<<<< Important.
https://forums.malwarebytes.com/topic/299350-disable-fast-startup/

Then please restart the computer and then do the following. <<<<< Important.

WARNING: Do Not click the Repair option under Advanced unless requested by a Malwarebytes support agent or authorized helper

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool. The tool also downloads and runs a file called FRSTEnglish. Please allow it to run.
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine 
  • A zip file named mbst-grab-results.zip will be saved to the Desktop or on the hidden Public desktop (usually C:\Users\Public\Desktop), please upload that file on your next reply


image.png.79d4442a821713608fa60808a98c2e69.png 

image.png.98d86a6c3017d2bbba48877ea4f6ba45.png

Thank you

Link to post
Share on other sites

  • Root Admin

I cannot speak for the speed issue at this moment, but the logs indicate the computer is having issues. Perhaps doing some clean up work may help improve the issue. @DashApple

 

System errors:
=============
Error: (05/28/2024 08:37:37 PM) (Source: iScsiPrt) (EventID: 1) (User: )
Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.

Error: (05/28/2024 08:37:37 PM) (Source: iScsiPrt) (EventID: 70) (User: )
Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data.

Error: (05/28/2024 08:37:37 PM) (Source: iScsiPrt) (EventID: 1) (User: )
Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.

Error: (05/28/2024 08:37:37 PM) (Source: iScsiPrt) (EventID: 1) (User: )
Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.

Error: (05/28/2024 08:37:21 PM) (Source: Microsoft-Windows-TPM-WMI) (EventID: 1796) (User: NT AUTHORITY)
Description: The Secure Boot update failed to update a Secure Boot variable with error -2147020471. For more information, please see https://go.microsoft.com/fwlink/?linkid=2169931

Error: (05/28/2024 06:00:00 PM) (Source: Microsoft-Windows-TPM-WMI) (EventID: 1796) (User: NT AUTHORITY)
Description: The Secure Boot update failed to update a Secure Boot variable with error -2147020471. For more information, please see https://go.microsoft.com/fwlink/?linkid=2169931

Error: (05/28/2024 05:55:06 PM) (Source: Microsoft-Windows-TPM-WMI) (EventID: 1796) (User: NT AUTHORITY)
Description: The Secure Boot update failed to update a Secure Boot variable with error -2147020471. For more information, please see https://go.microsoft.com/fwlink/?linkid=2169931

Error: (05/27/2024 09:25:01 PM) (Source: DCOM) (EventID: 10005) (User: NT AUTHORITY)
Description: DCOM got error "1053" attempting to start the service GoogleUpdaterInternalService127.0.6490.0 with arguments "--com-service" in order to run the server:
{7AA668AD-44C9-562C-B3B0-104376A71AFE}

 

Would you like some help scanning and cleaning up the system some? Again, this may not make any difference in scanning speed but should help to make the computer itself cleaner and more efficient.

 

 

 

Link to post
Share on other sites

Posted (edited)

Hi, Thankyou for the reply and info. 

Id be happy to try some scanning and cleaning up of the system if that's possible. I will have to look into the iscsi settings, I understand that's not a support issue for here outside the apparent speed changes with Malwarebytes active issue

Thanks. 

 

Edited by AdvancedSetup
Corrected font issue
Link to post
Share on other sites

  • Root Admin

I'm not saying that Malwarebytes is not at fault. Only that this clean up may not help correct the issue.

It's now almost 2 AM for me so I'll check back on you tomorrow, but in the mean time, please RESTART the computer. Then power cycle your Router and Modem if you have them.

Then get me a new fresh set of logs and I'll write a cleanup script tomorrow.

 

Scan with SecurityCheck by glax24
https://forums.malwarebytes.com/topic/307301-scan-with-securitycheck-by-glax24/

 

Scan with FSS Farbar Service Scanner
https://forums.malwarebytes.com/topic/306736-scan-with-fss-farbar-service-scanner/

 

Scan with Farbar Recovery Scan Tool
https://forums.malwarebytes.com/topic/306601-scan-with-farbar-recovery-scan-tool/

 

Thank you  @DashApple

 

Link to post
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.