Jump to content

Keep getting Website blocked due to riskware


Recommended Posts

Hello, I believe that I might be infected with something that Malware Bytes isn't able to remove.
I keep getting this pop up from Malware Bytes, but when I scan it says everything is fine.
image.png.ee8e5a1bad9fadbd5b2a6597574dfd9c.png

 

Is there anyone here that can help me get this resolved?

 

Link to post
Share on other sites

Hello. :welcome: My name is Maurice. I will guide you.

  • Removing pesky malware can be an involved set of tasks over separate runs. Have much patience. Follow my directions. 
  • Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Only run the tools I guide you to.
  • Do not run online games while case is on-going. Do not do any free-wheeling web-surfing.
  • The removal of malware isn't instantaneous, please be patient.
  • Cracked or or hacked or pirated programs are not only illegal, but also will make a computer a malware victim. Having such programs installed, is the easiest way to get infected. It is the leading cause of ransomware encryptions. It is at times also big source of current trojan infections. Please uninstall them now, if any are here, before we start the cleaning procedure.
  • Please stick with me until I give you the "all clear".
  • If your system is running Discord, please be sure to Exit out of it while this case is on-going.

    Do these 2 steps so that ALL folders & Files are set to SHOW, plus also, Turn OFF Windows Fast start.
    1. Show-Hidden-Folders-Files-Extensions
    https://forums.malwarebytes.com/topic/299345-show-hidden-folders-files-extensions/

    2. Disable-Fast-Startup
    https://forums.malwarebytes.com/topic/299350-disable-fast-startup/

3. First some housekeeping, and then one Scan.  There will be more later after all this.
Start Malwarebytes. Click Settings ( gear ) icon. Next, let us make real sure that Malwarebytes does NOT register with Windows Security Center

Click the Security Tab. Scroll down to

"Windows Security Center"

Click the selection to the left  for the line "Always register Malwarebytes in the Windows Security Center".
{ We want that to be set as Off   .... be sure that line's  radio-button selection is all the way to the Left.  thanks. }

This will not affect any real-time protection of the Malwarebytes for Windows    😃.

  • now Click the General tab.
  • Under Application updates, click the Check for updates button.

When it shows a new version available, Accept it and let it proceed forward.  Be sure it succeeds.

If prompted to do a Restart, just please follow all directions.

Let me know how that goes.    Next, the Malwarebytes scan

Next, click the small x on the Settings line to go to the main Malwarebytes Window.   Next click the blue button marked Scan.

 

When the scan phase is done, be real sure you Review and have all detected lines items check-marked on each line on the left. That too is very critical.

>>>>>>      👉      You can actually click the topmost left  check-box  on the very top line to get ALL lines  ticked   ( all selected).         <<<<     💢

 

MB4_scan_tick_ALL.jpg.d5c4071c62ed66534301fbb217b93bc0.jpg

Please double verify you have that TOP  check-box tick marked.   and that then, all lines have a tick-mark

 

Then click on Quarantine  button.

MB4_scan_all_Quarantine2.jpg.6c45445994d4125c0b617ac7c5551e03.jpg

 


Then, locate the Scan run report;  export out a copy;  & then attach in with your  reply.
See https://support.malwarebytes.com/hc/en-us/articles/360038479194-View-Reports-and-History-in-Malwarebytes-for-Windows-v4

 

(  4   )

 

Let's do one scan with Malwarebytes Adwcleaner to check for adwares. Just before pressing that "scan" button, be sure that Chrome & Edge, or other web browser are Closed.

It will not take much time,

First download & save it
guide & download link

Then be sure to close all web browsers after the download & before launching the tool.

Then go to where the EXE file is saved. Start Adwcleaner.  Then do a scan with Adwcleaner

Guide article

NOTE: IF Adwcleaner in the results shows "no items" flagged, then please click on the button marked "Run Basic Repair"

adwcleaner-basic-repair.png.b6454e1c53e6ff2c6d0b97103375d6b7.png

Attach the clean log from Adwcleaner when all completed.

NOTE: The I P Block message-event does mean that the Malwarebytes has STOPPED any connection to that rogue IP. Malwarebytes is keeping this Windows safe from potential harm.

I will have you do more after these steps here. Stick with me.

and tell me, did you get or install some new "free something" in the past two or three days or so ??

Edited by Maurice Naggar
Link to post
Share on other sites

Not a game, but I did install an "Injector" to inject a dll into another game. The injector did not work and seemed sort of sketchy. I did run it on VirusTotal and nothing came up but I am still suspicious. The injector was a .bat file.

Link to post
Share on other sites

This next tool ought to take something in the range of 15 - 25 minutes tops, depending on hardware speed.
get & run the Malwarebytes MBAR anti-rootkit tool to do 1 run with it.
Disregard the title subject of the topic.Run the MBAR tool as listed here 

https://forums.malwarebytes.com/topic/198907-requested-resource-is-in-use-error-unable-to-start-malwarebytes

  • when done, I need the MBAR logs.
  • Upon completion of the scan or after the reboot, two files named mbar-log.txt and system-log.txt will be created.
  • Both files can be found in the extracted MBAR folder on your Desktop.
  • Please attach both files in your next reply.
Link to post
Share on other sites

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.