Jump to content

I think I am being spied on.


Recommended Posts

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

  • Root Admin

Hello @fluent2332 and :welcome:

 

Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process

Then follow each step in the order provided. Unless otherwise asked, please attach all logs

 

Please make the following system changes:

  • If you have not done so already - Enable System Protection and create a NEW System Restore Point
  • Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the downloads are completed
  • Disable-Fast-Startup
  • Show-Hidden-Folders-Files-Extensions

Please run the following scans:

  1. Click the following link and run a  Scan with AdwCleaner
  2. Click the following link and run a  Scan with Malwarebytes 
       RESTART the computer
  3. Click the following link and run a  Scan with Farbar Recovery Scan Tool 
     

Example image of where to click to attach files when posting your reply

image.thumb.png.e208c182ff570799c53bcf57

 

Thank you

 

Link to post
Share on other sites

  • Root Admin

Please copy the Farbar program to a folder outside of the OneDrive path

C:\Users\fluen\OneDrive\Documents\FRSTEnglish.exe

 

It looks like you may have one here:  C:\Users\fluen\Downloads\FRSTEnglish2.exe

Perhaps remove the #2 from the name?  C:\Users\fluen\Downloads\FRSTEnglish.exe

 

 

Please run the following fix

 

NOTE: Please read all of the information below before running this fix.

  • NOTICE: This script was written specifically for this user, for use on this particular machine.
  • Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRSTEnglish.exe

Save the attached file:  FIXLIST.TXT to this folder C:\Users\fluen\Downloads\

NOTE. It's important that both files, FRSTEnglish.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

  1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
  2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed.
                Also, make sure you know the passwords for all websites as cookies may possibly be removed in some cases, but not all cases.
  3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

At the moment just a script designed for pirating software that was removed

 

 

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

Link to post
Share on other sites

Thanks, running the scan now on my laptop (I'm on another device.)

Quick thing though, as soon as I started the previous step of the fix thing, right when I clicked Fix a network notification popped up asking Logi+ or Logi options if they could connect to the network, and I just clicked 'cancel.' No big deal there right?

Link to post
Share on other sites

Hi again. So I stepped away and let it scan, and just checked it again now and it's 13 hours in and about 80% done. But it seems stuck at something, it's been the same file scanning for ten minutes now and I'm worried. It seems to be a .txt file or something. I really really hope the scan can continue because it took 13 hours thus far and I haven't been using the laptop. Will it eventually get over this file??


Link to post
Share on other sites

  • Root Admin

Okay, let's go ahead and abort it.

Please restart the computer and try this one

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool

https://devbuilds.s.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 


Select the  image.png  Windows Key and R Key together, the "Run" box should open.

user posted image

Drag and Drop KVRT.exe into the Run Box.

user posted image

C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box.

image.png

add -dontencrypt   Note the space between KVRT.exe and -dontencrypt

C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.
 
image.png


That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file.

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr
Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply.

To start the scan select OK in the "Run" box.

A EULA window will open, tick all confirmation boxes then select "Accept"

image.png

In the new window select "Change Parameters"

image.png

In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start...

user posted image

When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue"

user posted image

When complete, or if nothing was found select "Close"

image.png

Attach the report information as previously instructed...
 
Thank you
 
 

 

 

Link to post
Share on other sites

Ok, Kaspersky finished, but you never told me how to export a Kaspersky report file? I did the -dontencrypt command, but it seems the report in the Reports folder is still encrypted and a .kir file that I can't upload here. It found 10 things and I cured 2 of them and 7 are deleted with bearlibterminal.dll skipped for a Steam game that I believe is a real game and a false positive (The Red Prison game on Steam.) Any way I can get this report to you somehow??

Link to post
Share on other sites

  • Root Admin

Yes, I can help you but it takes time. I have a lot of users to assist as well as work inside the company

Please run the following

 

SecurityCheck by glax24              


I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.
CheckSecurity is a utility for quickly checking for the presence of vulnerable applications

  • Temporarily disable Microsoft SmartScreen to download the software
  • Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
  • If SmartScreen blocks the file from running click on More info and Run anyway
  • This tool is safe.   Smartscreen is overly sensitive. You can check the VirusTotal scan of the tool from here
  • Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
  • Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
  • You can find this file in a folder called SecurityCheckC:\SecurityCheck\SecurityCheck.txt

Items checked:

  1. User Account Control (UAC).
  2. Service pack.
  3. IE version.
  4. Automatic OS update. Sets of critical KB patches when updating is disabled.
  5. Antivirus, firewall, other security utilities.
  6. Versions of Java, Oracle Virtualbox.
  7. Version of Adobe Flash Player, Adobe AIR.
  8. Versions of Adobe Reader, Acrobat Reader DC, Foxit Reader.
  9. Versions of media players (iTunes, AIMP, foobar2000).
  10. Versions of messengers (Skype, Pidgin).
  11. Versions of installed browsers (Chrome, Opera, Firefox, Yandex, SeaMonkey).
  12. Versions of mail programs (The Bat, Thunderbird).
  13. Checking running processes and security program services
  14. Searching for installed Adware programs and optimizer programs (More than 5000).

Thank you

 

Link to post
Share on other sites

  • Root Admin

You're quite welcome for the assist.

 

Please update the following and restart the computer

  • Microsoft Visual C++ 2015-2022 Redistributable (x86) - 14.36.32532 v.14.36.32532.0 Warning! Download Update
  • Microsoft Visual C++ 2015-2022 Redistributable (x64) - 14.36.32532 v.14.36.32532.0 Warning! Download Update

 

Then run the following

 

Let's go ahead and run a couple of scans and get some updated logs from your system. Please read the entire post below before starting so that you're more familiar with the process

[ 1 ]

Please make the following system changes.

  • Temporarily disable your antivirus real-time protection or other security software first only if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed.
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed.
  • Disable-Fast-Startup
  • Show-Hidden-Folders-Files-Extensions

[ 2 ]

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

Link to post
Share on other sites

Hi. Just to be clear, do I update BOTH of the downloads you linked in the first part of your post? These:

  • Microsoft Visual C++ 2015-2022 Redistributable (x86) - 14.36.32532 v.14.36.32532.0 Warning! Download Update
  • Microsoft Visual C++ 2015-2022 Redistributable (x64) - 14.36.32532 v.14.36.32532.0 Warning! Download Update

I download and update both, or do I pick one based on my operating system (i.e. 64bit vs 32bit?)

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.

Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.