Jump to content

I can't use Windows Defender after using KMS pico


Recommended Posts

  • Root Admin

Hello  and  :welcome:    @lemonade

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Removing pesky malware can be an involved set of tasks over separate runs. Have much patience. Follow my directions. 
  • Please follow all steps in the provided order and post back all requested logs.
  • Please attach all log files to your post, unless otherwise requested.
  • Temporarily disable Microsoft SmartScreen to download software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup of all private data.
  • Do not run online games while your case is ongoing. Do not do any free-wheeling of risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you unless requested.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim.
    Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections. 
    If there are any on the system you should uninstall them before we proceed.  
  • If your system is running Discord, or P2P Torrent software, please be sure to Exit out of it while this case is on-going.


Do these two steps so that ALL Folders & Files are set to SHOW, plus also, Turn OFF Windows Fast start.

Show-Hidden-Folders-Files-Extensions
https://forums.malwarebytes.com/topic/299345-show-hidden-folders-files-extensions/

Disable-Fast-Startup
https://forums.malwarebytes.com/topic/299350-disable-fast-startup/
 

  • Next, please restart Windows

  • Please be patient and stick with me until I give you the "all clear" or otherwise indicate all is good

 

 

NOTE: We will not assist you in pirating or stealing software.
We will help you to clean the computer but that means we will delete stolen software that is often the root cause of infections.

 

To begin, please do the following so that we may take a closer look at your installation for troubleshooting. This is a report only.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system security.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply

Thank you

 

 

Link to post
Share on other sites

  • Root Admin

Please run the following fix

 

NOTE: Please read all of the information below before running this fix.

  • NOTICE: This script was written specifically for this user, for use on this particular machine.
  • Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRST64.exe

Save the attached file:  FIXLIST.TXT to this folder C:\Users\viole\Downloads\

NOTE. It's important that both files, FRST64.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

  1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
  2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed.
                Also, make sure you know the passwords for all websites as cookies may possibly be removed in some cases, but not all cases.
  3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

Overall the log looks pretty good. Let me have you run the following now @lemonade

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get started. 
  • When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
  • On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
  • When prompted for scan type, Click on the Full Scan button
  • Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
  • Have patience.  The entire process may take a few hours or more.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log and give it a name and location you remember.
  • If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
  • Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

Link to post
Share on other sites

  • Root Admin

Thank you for the log. Please go ahead and run the following now @lemonade

 

 

Let's go ahead and run a couple of scans and get some updated logs from your system.


Please make the following changes.

 

  • Temporarily disable your antivirus real-time protection or other security software first if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed.
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed.
  • Disable-Fast-Startup
  • Show-Hidden-Folders-Files-Extensions

 


Next, run these steps and post back the logs as an attachment when ready.


[ 1 ]

Malwarebytes for Windows

  • If you already have Malwarebytes installed then open Malwarebytes and click on the small gear icon, then click on the "Check for updates" button on the General tab.
  • After any updates, click the middle Scan button from the main page. It will automatically run a Threat Scan.
  • If you don't have Malwarebytes installed yet please download it from here and install it.
  • Once installed then open Malwarebytes and select Scan and let it run.
  • Once the scan is completed, make sure you have it quarantine any detections it finds.
  • If no detections were found click on the Save results drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If there were detections then once the quarantine has completed click on the View report button, Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If the computer restarted to quarantine you can access the logs from the Detection History, then the History tab. Highlight the most recent scan and double-click to open it. Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If Malwarebytes won't run then please skip to the next step and let us know in your next reply that the scanner would not run.

[ 2 ]

Malwarebytes AdwCleaner

  • Please download Malwarebytes AdwCleaner and save the file to your Desktop or Downloads folder.
  • Double-click to run the program - Malwarebytes AdwCleaner guide
  • Accept the End User License Agreement.
  • Wait until the database is updated.
  • Click Scan Now.
  • DO NOT uninstall or remove the Preinstalled software if found. Uncheck any items listed as Preinstalled
  • When finished, if items are found please click Quarantine to finish the cleaning process.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Attach that log to your next reply.
     
  • If No Detections are found, Click Skip Basic Repair

    WARNING: Do Not click the Run Basic Repair button unless instructed to by a Malwarebytes support agent or authorized helper


 

RESTART THE COMPUTER Before running Step 3

[ 3 ]

Gather MBST Logs

Please do the following so that we may take a closer look at your system for any possible infections.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply

    WARNING: Do Not click the Repair System under Advanced unless requested to by a Malwarebytes support agent or authorized helper

 

Thank you

 

Link to post
Share on other sites

  • Root Admin

Yes, the system was badly infected. It will take more work to get everything fixed up.

 

The Farbar (FRST) program is located here in your downloads folder:  C:\Users\viole\Downloads\FRST64.exe

Please follow the process below to perform a fix in Safe Mode

 

Start in Safe mode:

  • Press the Windows icon on the keyboard together with the letter I, to get into the Settings.
  • Choose Update and Security.
  • From the menu at the left, choose Recovery.
  • Under the title Advanced startup at the right, choose Restart now.
  • From the window that will appear choose Troubleshoot and then Advanced options.
  • Choose Startup Settings and then Restart.
  • Press number 5, for choosing Safe mode with networking.
  • You will know that you are in Safe mode, if the background is black and Safe mode is written at the four corners of the screen.


After that:

Please do the following to run a FRST fix.

NOTICE: This script was written specifically for this user. Running it on another machine may cause damage to your operating system

  • Select the entire contents of the code box below, from the "Start::" line to "End::", including both lines. Right-click and select "Copy ". No need to paste anything to anywhere.

 

Start::
HKLM\SOFTWARE\Microsoft\Windows Defender: [DisableAntiSpyware] Restriction
HKLM\SOFTWARE\Microsoft\Windows Defender: [DisableAntiVirus] Restriction
HKLM\SOFTWARE\Policies\Microsoft\Windows Defender: Restriction
HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate: Restriction
GroupPolicy: Restriction
HKLM\...\Policies\Explorer: [SettingsPageVisibility] hide:windowsdefender
C:\Users\viole\AppData\Local\Temp\*
End::

 

  • Right-click on FRST64 in your Downloads folder, to run it as administrator. When the tool opens, click "yes" to the disclaimer.
  • Press the Fix button once and wait.
  • FRST will process fixlist.txt
  • When finished, it will produce a log fixlog.txt in your Downloads folder or where you have the Farbar program located.
  • Attach that log in your next reply.
 
Thank you
 
 
Link to post
Share on other sites

  • 3 weeks later...
  • Root Admin

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.