Jump to content

Keep getting RTP detection


Go to solution Solved by Maurice Naggar,

Recommended Posts

Hello, :welcome: @Derek317 My name is Maurice. I will guide you.

  • Removing pesky malware can be an involved set of tasks over separate runs. Have much patience. Follow my directions. 
  • Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Only run the tools I guide you to.
  • Do not run online games while case is on-going. Do not do any free-wheeling web-surfing.
  • The removal of malware isn't instantaneous, please be patient.
  • Cracked or or hacked or pirated programs are not only illegal, but also will make a computer a malware victim. Having such programs installed, is the easiest way to get infected. It is the leading cause of ransomware encryptions. It is at times also big source of current trojan infections. Please uninstall them now, if any are here, before we start the cleaning procedure.
  • Please stick with me until I give you the "all clear".
  • If your system is running Discord, please be sure to Exit out of it while this case is on-going.

    Do these 2 steps so that ALL folders & Files are set to SHOW, plus also, Turn OFF Windows Fast start.
    Show-Hidden-Folders-Files-Extensions
    https://forums.malwarebytes.com/topic/299345-show-hidden-folders-files-extensions/

    Disable-Fast-Startup
    https://forums.malwarebytes.com/topic/299350-disable-fast-startup/

I would like a report set for review. This is a report only. This is the first beginning step so I can see what is what on this particular machine.

Please download MALWAREBYTES MBST Support Tool

Once you start it click Advanced >>> then Gather Logs

Have patience till the run has finished.
Attach the mbst-grab-results.zip from the Desktop to your reply..

  • Thanks 1
Link to post
Share on other sites

Thank you. This next tool ought to take something in the range of 15 - 25 minutes tops, depending on hardware speed.
get & run the Malwarebytes MBAR anti-rootkit tool to do 1 run with it.
Disregard the title subject of the topic.Run the MBAR tool as listed here 

https://forums.malwarebytes.com/topic/198907-requested-resource-is-in-use-error-unable-to-start-malwarebytes

  • when done, I need the MBAR logs.
  • Upon completion of the scan or after the reboot, two files named mbar-log.txt and system-log.txt will be created.
  • Both files can be found in the extracted MBAR folder on your Desktop.
  • Please attach both files in your next reply.
Link to post
Share on other sites

  • Solution

If the on-screen display shows that the tool is working, then leave it running, for at most another 10 or so minutes.

IF it does not seem to be moving along, then Cancel the run.

What follows here, is the next procedure.

Please run the following custom script. Read all of this before you start. The meaning of the "Fix button" operation here is just to run a custom script just for this particular machine.

NOTE-1:  This custom fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files.  It will attempt to run some scans with Microsoft Defender antivirus. It will attempt to clear Cache files of web browsers.  It will attempt to clear temporary file areas. It rebuilds the Winsock. Depending on the speed of your computer this fix may take 50-55 minutes or more.

Please Close all open work before you actually do begin this run.

Farbar  FRSTENGLISH program location:   Downloads folder. The tool is already on system. That is what we will use.

Please download the attached fixlist.txt file and save it to Downloads

Fixlist.txt <- < - - - -

NOTE. It's important that both files, FRSTENGLISH, and fixlist.txt are in the same location or the fix will not work.

Right-click with your mouse on  FRSTENGLISH and select "Run as Administrator" and reply Yes and allow it to proceed when prompted. That is important.

next, press the Fix button just once and wait.

You will see a green-color scroll display while FRST is running.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Downloads folder (Fixlog.txt) . Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

The system will be rebooted after the fix has run. Attach FIXLOG.txt with next reply.

NOTICE: For potential outside readers,  This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause harm.

Link to post
Share on other sites

Good. As a next step, I suggest the following:
This is for a scan with ESET Onlinescanner (free). ESET is a well-respected, well-known entity and tool. ESET Onlinescanner checks for viruses, other malware, adwares, & potentially unwanted applications.
This here you can start & once it is under way, you can leave the machine alone & let it run over-night. No need to keep watch once it starts the actual scan run.

Go to https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

It will start a download of "esetonlinescanner.exe"

  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get it started.

 

  • When presented with the initial ESET options, click on "Computer Scan".
  • Next, when prompted by Windows, allow it to start by clicking Yes
  • When prompted for scan type, Click on CUSTOM scan  and select C drive to be scanned
  • Look at & tick ( select ) the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"
  • and click on Start scan button.

Have patience. The entire process may take an hour or more. There is an initial update download.
There is a progress window display. You may step away from machine &. Let it be. That is, once it is under way, you should leave it running. It will run for several hours.

  • At screen "Detections occurred and resolved" click on blue button "View detected results"
  • On next screen, at lower left, click on blue "Save scan log"
  • View where file is to be saved. Provide a meaningful name for the "File name:"
  • On last screen, set to Off (left) the option for Periodic scanning
  • Click "save and continue"
  • Please attach the report file so I can review
Link to post
Share on other sites

Thank you. That is a very very fortunate cleanup by ESET. It found and removed some apparent trojans.

Sophos Scan & Clean

Download Sophos Free Virus Removal Tool and save it to your desktop.

  • If your security alerts to this scan either accept the alert or turn off your security to allow Sophos to run and complete.....
  • Please close all other open applications and Do Not use your PC whilst the scan is in progress... This scan is very thorough so it may take several hours to complete, please be patient...

Double click the icon and select Run

Click Next

Select I accept the terms in this license agreement, then click Next twice

Click Install

Click Finish to launch the program

  • Once the virus database has been updated click Start Scanning

If any threats are found click Details, then View log file... (bottom left hand corner)

 

Attach the results in your next reply

  • Close the Notepad document, close the Threat Details screen, then click Start cleanup

Click Exit to close the program

 

If no threats were found please confirm that result...

  • The Virus Removal Tool scans the following areas of your computer:
  • Memory, including system memory on 32-bit (x86) versions of Windows
  • The Windows registry
  • All local hard drives, fixed and removable
  • Mapped network drives are not scanned.

Note: If threats are found in the computer memory, the scan stops. This is because further scanning could enable the threat to spread. You will be asked to click Start Cleanup to remove the threats before continuing the scan.

 

Saved logs are found under this sub-folder: C:\ProgramData\Sophos\Sophos Virus Removal Tool\Logs 

Please attach that log on your next reply

Sincerely.

Link to post
Share on other sites

Alright. Now a different scan with another security scanner. 

You should first Close as many of your open-user app-screens as possible. That is to say, Exit all that you do not need to have open.

This with Kaspersky KVRT tool.

Download Kaspersky Virus Removal Tool (KVRT) from here: https://www.kaspersky.com/downloads/thank-you/free-virus-removal-tool and save to your Desktop.

Next, Select the Windows Key and R Key together, the "Run" box should open.

user posted image

Drag and Drop KVRT.exe into the Run Box.

user posted image

C:\Users\DerekWong\DESKTOP\KVRT.exe will now show in the run box.

user posted image

add
-dontencrypt

Note the space between KVRT.exe and -dontencrypt

C:\Users\DerekWong\DESKTOP\KVRT.exe -dontencrypt 

should now show in the Run box.

user posted image

That addendum to the run command is very important.


To start the scan select OK in the "Run" box.



The Windows Protected your PC window "may" open, IF SO then select "More Info"

user posted image

A new Window will open, select "Run anyway"

user posted image

A EULA window will open, tick both confirmation boxes then select "Accept"

user posted image

In the new window select "Change Parameters"

user posted image

 
  • In the new window ensure the following boxes are ticked:
    • System memory
    • Startup objects
    • Boot sectors
    • System drive
  • Then select "OK" and „Start scan“.

The Kaspersky tool is very thorough so will take a considerable time to complete, please allow it to finish. Also while Kaspersky runs do not use your PC for anything else..

  • completed: If entries are found, there will be options to choose. If "Cure" is offered, leave as it is. For any other options change to "Delete", then select "Continue".
  • Usually, your system needs a reboot to finish the removal process.
  • Logfiles can be found on your systemdrive (usually C: ), similar like this:

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20231006_203000.klr

  • Right click direct onto those reports, select > open with > Notepad.
  • Save the files and attach them with your next reply
Link to post
Share on other sites

The result of the Kaspersky KVRT scan is excellent. 

I would recommend getting a readout report as to update status of some key apps.
Temporarily disable Microsoft SmartScreen to download the next software below 

Download SecurityCheck by glax24 from here

and save the tool on the desktop.

                   If Windows's  SmartScreen block that with a message-window, then
                         Click on the MORE INFO spot and over-ride that and allow it to proceed.

                             This tool is safe.   Smartscreen is overly sensitive.

Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"   and reply YES to allow to run & go forward
Wait for the scan to finish. It will open in a text file named SecurityType.txt. Close the file.  Attach it with your next reply.
You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

2. Have the IP Block notices all gone away ?

  • Thanks 1
Link to post
Share on other sites

I am vry glad to read that there are no more block notices. 

These are the applications that need your attention & follow-up.
Git v.2.39.2  Warning! Download Update


Node.js v.18.14.1  Warning! Download Update

Microsoft Silverlight v.5.1.20913.0  Warning! This software is no longer supported, ancient & a risk UNINSTALL this.

Python 3.10.6 (64-bit) v.3.10.6150.0  Warning! Download Update

7-Zip 21.00 alpha (x64) v.21.00 alpha  Warning! Download Update
Uninstall old version and install new one.

WinRAR 6.01 (64-bit) v.6.01.0  Warning! Download Update

Discord v.1.0.9011  Warning! Download Update

Microsoft Teams v.1.6.00.11166  Warning! Download Update

Zoom v.5.13.3 (11494)  Warning! Download Update

µTorrent v.3.5.5.46552  Warning! Ad-supported P2P-client.

Audacity 3.1.3 v.3.1.3  Warning! Download Update

VLC media player v.3.0.12  Warning! Download Update

Adobe Flash Player 12 Plugin v.12.0.0.43  Warning! This software is ancient & a risk. Please uninstall it.

Adobe Shockwave Player 12.0 v.12.0.7.148  Warning! This software is  ancient & a risk. Please uninstall it.

👌💢 Temporarily disable Microsoft SmartScreen to download the next software below

Let's go ahead and do some clean-up work and remove the tools and logs we've run.
Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_2-15.exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt.
  • You may attach that file to your next reply. (not compulsory)
  • Delete mb-support-1.9.2.982.exe
  • Delete mbst-grab-results.zip on the Desktop.

Your system is good-to-go.
Sincerely.

  • Thanks 1
Link to post
Share on other sites

Thank you .

Delete mb-support-1.9.2.nnn.exe
Delete mbst-grab-results.zip on the Desktop.
Consider using PatchMyPC, keep all your software up-to-date - https://patchmypc.com/home-updater#download

Keep your system and programs up to date. Several programs release security updates on a regular basis to patch vulnerabilities. Keeping your software patched up prevents attackers from being able to exploit them to drop malware.

I am marking this case for closure.
I wish you all the best. Stay safe.
Sincerely.

Maurice

  • Thanks 1
Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.