Realtime protection keeps turning off on 4.6.2

[Smalltalker]

I am not quite sure why but realtime protection on MB 4.6.2 keeps turning off despite having tamper proof protection turned on.  (I have to enter my password to turn on the protection but somehow MB protection turns off without my password being entered). 

Not sure how to proceed.  Any ideas are appreciated.

[Porthos]

4 minutes ago, Smalltalker said:

Not sure how to proceed.  Any ideas are appreciated.

Please do the following so that we may take a closer look at your system.

Please restart the computer and do the following.

WARNING: Do Not click the Repair option under Advanced unless requested by a Malwarebytes support agent or authorized helper

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

• Download the Malwarebytes Support Tool
• In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
• In the User Account Control pop-up window, click Yes to continue the installation
• Run the MBST Support Tool
• In the left navigation pane of the Malwarebytes Support Tool, click Advanced
• In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
• A zip file named mbst-grab-results.zip will be saved to the Public desktop (usually C:\Users\Public\Desktop), please upload that file on your next reply
  
   

Thank you

[Smalltalker]

Here is the scan. 

mbst-grab-results.zip

[AdvancedSetup]

Hello @Smalltalker

Please see if the following corrects the issue or not and let us know

 

"If you have enabled the optional tamper protection, please TURN IT OFF.
Note: If you forget your Tamper Protection password, it can be reset using your license key, or the key portion of your license, if your license is in the older ID and Key format. In the Tamper Protection window, click Reset password, then enter your license key (capitalized and including dashes) to set a new password."

 

Can you please do the following?

• Download the Malwarebytes Support Tool
• In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
• In the User Account Control pop-up window, click Yes to continue the installation
• Run the MBST Support Tool
• In the left navigation pane of the Malwarebytes Support Tool, click Advanced
• In the Advanced Options, click the CLEAN button and follow the onscreen instructions to reinstall Malwarebytes
• NOTE: Please have patience as it can take a while to remove and reinstall. The computer will restart to complete

After the restart please do the following

• Run the MBST Support Tool
• In the left navigation pane of the Malwarebytes Support Tool, click Advanced
• In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
• A zip file named mbst-grab-results.zip will be saved to your desktop, please upload that file on your next reply

Thank you

 

Edited September 26, 2023 by AdvancedSetup
Updated information