Jump to content

Tojan? Blocked me from antivirus sites


Recommended Posts

I recently downloaded what I believe to be a trojan, I attempted to install some stronger antivirus software but it seems to be blocking me out of any antivirus sites. I followed a similar cases advice but still cannot access these sites. 

I used FRST as was suggested by that other thread, and will post the information below. Further, I have run malwarebytes scan with all options enabled including rootkit and algorithm checks. While this found a few things (which I think might have just been from google) removing the found files did not fix the issue.

Please help

FRST.txt Addition.txt scan 2.txt scan 1.txt

Link to post
Share on other sites

  • Root Admin

Hello  and  :welcome:    @bobbbb

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow all steps in the provided order and post back all requested logs
  • Please attach all log files to your post, unless otherwise requested
  • Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
  • Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim.
  • Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections.
  • If there are any on the system you should uninstall them before we proceed.
  • Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
  • If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

 

Let's go ahead and run a couple of scans and get some updated logs from your system.


Please make the following changes.

 

  • Temporarily disable your antivirus real-time protection or other security software first if it blocks or interferes with the scans or downloads.. Make sure to turn it back on once the scans are completed.
  • Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed.
  • Disable-Fast-Startup
  • Show-Hidden-Folders-Files-Extensions

 


Next, run these steps and post back the logs as an attachment when ready.


[ 1 ]

Malwarebytes for Windows

  • If you already have Malwarebytes installed then open Malwarebytes and click on the small gear icon, then click on the "Check for updates" button on the General tab.
  • After any updates, click the middle Scan button from the main page. It will automatically run a Threat Scan.
  • If you don't have Malwarebytes installed yet please download it from here and install it.
  • Once installed then open Malwarebytes and select Scan and let it run.
  • Once the scan is completed, make sure you have it quarantine any detections it finds.
  • If no detections were found click on the Save results drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If there were detections then once the quarantine has completed click on the View report button, Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If the computer restarted to quarantine you can access the logs from the Detection History, then the History tab. Highlight the most recent scan and double-click to open it. Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If Malwarebytes won't run then please skip to the next step and let us know in your next reply that the scanner would not run.

[ 2 ]

Malwarebytes AdwCleaner

  • Please download Malwarebytes AdwCleaner and save the file to your Desktop or Downloads folder.
  • Double-click to run the program - Malwarebytes AdwCleaner guide
  • Accept the End User License Agreement.
  • Wait until the database is updated.
  • Click Scan Now.
  • When finished, if items are found please click Quarantine to finish the cleaning process.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Attach that log to your next reply.
     
  • If No Detections are found, Click Skip Basic Repair

    WARNING: Do Not click the Run Basic Repair button unless instructed to by a Malwarebytes support agent or authorized helper


 

RESTART THE COMPUTER Before running Step 3

[ 3 ]

Please run the following scan

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

[ 4 ]

Gather MBST Logs

Please do the following so that we may take a closer look at your system for any possible infections.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply

    WARNING: Do Not click the Repair System under Advanced unless requested to by a Malwarebytes support agent or authorized helper

 

 

Thank you

Link to post
Share on other sites

update, trojan is now attempting desperately to connect to a mining site via windows file explorer. Report from the block below.
I blocked the port it is attempting to use via windows defender rules, and added a parental lock for the sites its trying to access to my router so it will deny it while the safety thing runs overnight.

trojan.txt

Link to post
Share on other sites

  • Root Admin

Thank you for the logs @bobbbb

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool

https://devbuilds.s.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 


Select the  image.png  Windows Key and R Key together, the "Run" box should open.

user posted image

Drag and Drop KVRT.exe into the Run Box.

user posted image

C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box.

image.png

add -dontencrypt   Note the space between KVRT.exe and -dontencrypt

C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.
 
image.png


That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file.

Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr
Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply.

To start the scan select OK in the "Run" box.

A EULA window will open, tick all confirmation boxes then select "Accept"

image.png

In the new window select "Change Parameters"

image.png

In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start...

user posted image

When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue"

user posted image

When complete, or if nothing was found select "Close"

image.png

Attach the report information as previously instructed...
 
Thank you
 
 

 

 

Link to post
Share on other sites

  • Root Admin

The log looks good. @bobbbb

A bogus Chrome file which we stopped from loading and Kaspersky deleted it.

 

Please run the following

SecurityCheck by glax24              

I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.

  • Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
  • If Microsoft SmartScreen blocks the download, click through to save the file
  • This tool is safe.   Smartscreen is overly sensitive.
  • If SmartScreen blocks the file from running click on More info and Run anyway
  • Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
  • Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
  • You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

 

image.png

image.png

image.png

 

Thank you

 

 

Link to post
Share on other sites

  • 4 weeks later...
  • Root Admin

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.