Jump to content

"Website blocked due to compromised" & "Website blocked due to malware"


Recommended Posts

"Website blocked due to compromised" 

"Website blocked due to malware"

I keep having these 2 types of notifications pop up and it is always from a different IP Address.

I have scanned my PC and everything comes back clean.

I get this popup every few seconds and perhaps a hundred times a day while I am online.

Please help! Thank you in advance

Let me know what you need from me.

Edited by AdvancedSetup
Corrected font issue
Link to post
Share on other sites

11 minutes ago, SaroshJ said:

Let me know what you need from me.

Are these inbound or outbound?

Please do the following so that we may take a closer look at your system.

Please restart the computer and do the following.

WARNING: Do Not click the Repair option under Advanced unless requested by a Malwarebytes support agent or authorized helper

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply

     

Thank you

Link to post
Share on other sites

  • Root Admin

@SaroshJ

Thank you for the logs. Part of your issue is the Private Internet Access program. That uses many different IP addresses that have been flagged for bad behavior. So you'll need to add exclusions to prevent that.

Exclude detections in Malwarebytes for Windows
https://support.malwarebytes.com/hc/en-us/articles/360038479234-Exclude-detections-in-Malwarebytes-for-Windows

 

 

 

Please run the following fix

 

NOTE: Please read all of the information below before running this fix.

  • NOTICE: This script was written specifically for this user, for use on this particular machine.
  • Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRSTEnglish.exe

Save the attached file:  FIXLIST.TXT to this folder C:\Users\saros\Downloads\

NOTE. It's important that both files, FRSTEnglish.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

  1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
  2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed.
                Also, make sure you know the passwords for all websites as cookies may possibly be removed in some cases, but not all cases.
  3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

Thank you, that log looks pretty good.

Let me have you run the following

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

 

Link to post
Share on other sites

  • Root Admin

Great, no issues found in that log.

Please run the following now @SaroshJ

 

 

SecurityCheck by glax24              

I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.

  • Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
  • If Microsoft SmartScreen blocks the download, click through to save the file
  • This tool is safe.   Smartscreen is overly sensitive.
  • If SmartScreen blocks the file from running click on More info and Run anyway
  • Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
  • Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
  • You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

 

image.png

image.png

image.png

 

Thank you

 

 

Link to post
Share on other sites

Hi @AdvancedSetup and @Porthos,

So, my original issue of the popups is still there.

I do get Malware/Compromised popups frequently, but I think it boils down to the IP address issue you talked about earlier that I don't think I can avoid that unless I get a dedicated IP from my VPN provider and then simply exclude that in the exclusion list.

On the flip side I think I am happy that at least my system is clean and there are no underlying infections.

Thank you, I appreciate your support on this.

Sarosh

 

Link to post
Share on other sites

  • Root Admin

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt.
  • Please attach that file to your next reply. (not compulsory)

 

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/240255/password-managers-compared-lastpass-vs-keepass-vs-dashlane-vs-1password/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Further reading if you like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes

 

Link to post
Share on other sites

6 minutes ago, SaroshJ said:

I use my system a lot in public spaces and hence the VPN to keep my communications secure (also in non-public places :))

Since I do not work for Malwarebytes, I say this as a personal recommendation, Malwarebytes Privacy would fix the bad IP issues that you get with PIA.

3 hours ago, SaroshJ said:

simply exclude that in the exclusion list

If you put those IP's in your exclusions, you open up to threats as your protection will be reduced.

Edited by Porthos
Link to post
Share on other sites

  • Root Admin

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread. Other members who need assistance please start your own topic in a new thread.

Please review the following to help you better protect your computer and privacy Tips to help protect from infection

Thank you

 

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.