Question about "RTP Detection - Compromised"

[Carzzy]

 

Hi, guys. I am recently having the same problem as the friend above.

Literally the same problem, as if this brazillian IP address 138.99.160.244 had infected my Avast softwares such as AvastSvc, TuneSvc, VpnSvc, instup, etc.
I also did the same trick as the friend above, by adding custom firewall rules into avast to block that connection, but unfortunately, It didn't work.
Below I left some prints to show that I have the same issue, and I also attached the diagnostic log to make it easier to understand the problem.

I hope you can help me :/

Thank you in advance.

mbst-grab-results.zip

[AdvancedSetup]

Hello  and      @Carzzy

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

• Please follow all steps in the provided order and post back all requested logs
• Please attach all log files to your post, unless otherwise requested
• Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
• Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
• Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
• Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
• Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
• Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
• Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim.
• Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections.
• If there are any on the system you should uninstall them before we proceed.
• Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
• If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

 

Let's go ahead and run a couple of scans and get some updated logs from your system.

Please make the following changes.

 

• Temporarily disable your antivirus real-time protection or other security software first. Make sure to turn it back on once the scans are completed.
• Temporarily disable Microsoft SmartScreen to download software below only if needed. Make sure to turn it back on once the scans are completed.
• Disable-Fast-Startup
• Show-Hidden-Folders-Files-Extensions

 

Next, run these steps and post back the logs as an attachment when ready.

[ 1 ]

Malwarebytes for Windows

• If you already have Malwarebytes installed then open Malwarebytes and click on the small gear icon, then click on the "Check for updates" button on the General tab.
• After any updates, click the middle Scan button from the main page. It will automatically run a Threat Scan.
• If you don't have Malwarebytes installed yet please download it from here and install it.
• Once installed then open Malwarebytes and select Scan and let it run.
• Once the scan is completed, make sure you have it quarantine any detections it finds.
• If no detections were found click on the Save results drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If there were detections then once the quarantine has completed click on the View report button, Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If the computer restarted to quarantine you can access the logs from the Detection History, then the History tab. Highlight the most recent scan and double-click to open it. Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If Malwarebytes won't run then please skip to the next step and let us know in your next reply that the scanner would not run.

[ 2 ]

Malwarebytes AdwCleaner

• Please download Malwarebytes AdwCleaner and save the file to your Desktop or Downloads folder.
• Double-click to run the program - Malwarebytes AdwCleaner guide
• Accept the End User License Agreement.
• Wait until the database is updated.
• Click Scan Now.
• When finished, if items are found please click Quarantine to finish the cleaning process.
• Your PC should reboot now if any items were found.
• After reboot, a log file will be opened. Attach that log to your next reply.
   
• If No Detections are found, Click Skip Basic Repair
  
  WARNING: Do Not click the Run Basic Repair button unless instructed to by a Malwarebytes support agent or authorized helper

 

RESTART THE COMPUTER Before running Step 3

[ 3 ]

Gather MBST Logs

Please do the following so that we may take a closer look at your system for any possible infections.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

• Download the Malwarebytes Support Tool
• In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
• In the User Account Control pop-up window, click Yes to continue the installation
• Run the MBST Support Tool
• In the left navigation pane of the Malwarebytes Support Tool, click Advanced
• In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
• A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply
  
  WARNING: Do Not click the Repair System under Advanced unless requested to by a Malwarebytes support agent or authorized helper

 

Thank you

 

[Carzzy]

01.txtmbst-grab-results.zip

 

Hello, I followed the step by step, and can generate the logs of step 1 and 3.
Step 2 did not generate log, because he could not find any detection.

If you have any questions, Feel free to ask me.

[AdvancedSetup]

Please run the following @Carzzy

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

• Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
• The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

 

[Carzzy]

msert.log

 

Hello.

I hope you're doing well.

I followed the step by step, and managed to generate the log you requested.

Please consult this txt attached here.

 

Thanks in advance.

[AdvancedSetup]

It found some Phishing attachments that were part of your email. Make sure you report or at least delete any fake, scam, or phishing type emails.

Please go ahead and run the following @Carzzy

 

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

• It will start a download of "esetonlinescanner.exe"
• Save the file to your system, such as the Downloads folder, or else to the Desktop.
• Go to the saved file, and double click it to get started. 
• When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
• On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
• When prompted for scan type, Click on the Full Scan button
• Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
• Have patience.  The entire process may take a few hours or more.
• When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
• Click The blue “Save scan log” to save the log and give it a name and location you remember.
• If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
• Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
• Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

[Carzzy]

Hello.

Of c ourse, here is the log file.

Thanks in advance.

02.txt

[AdvancedSetup]

That's probably not an active threat, but good to remove. Let's go ahead and run one more scanner @Carzzy

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 

Select the     Windows Key and R Key together, the "Run" box should open. Drag and Drop KVRT.exe into the Run Box. C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box. add -dontencrypt   Note the space between KVRT.exe and -dontencrypt C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.   That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file. Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply. To start the scan select OK in the "Run" box. A EULA window will open, tick all confirmation boxes then select "Accept" In the new window select "Change Parameters" In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start... When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue" When complete, or if nothing was found select "Close" Attach the report information as previously instructed...   Thank you

 

 

[Carzzy]

Hi.

Alright, here it is the log file.

Thanks  in advance.

report_2023.07.14_23.54.14.klr.txt

[AdvancedSetup]

Sorry about that @Carzzy

It looks like I lost track of your post.

How is the computer running now?

Do you still need further assistance?

Thank you

 

[AdvancedSetup]

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks