Sudden high memory and disk usage, changes made that I didn't initiate

[Robin2020]

All of a sudden my Chrome settings are changed and login information to websites isn't valid anymore. I have run Malwarebytes and it says my system is clean. Unsure of what to do.

[AdvancedSetup]

Hello  @Robin2020

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

• Please follow all steps in the provided order and post back all requested logs
• Please attach all log files to your post, unless otherwise requested
• Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
• Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
• Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
• Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
• Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
• Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
• Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim.
• Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections.
• If there are any on the system you should uninstall them before we proceed.
• Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
• If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

To begin, please do the following so that we may take a closer look at your installation for troubleshooting. This is a report only.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

• Download the Malwarebytes Support Tool
• In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
• In the User Account Control pop-up window, click Yes to continue the installation
• Run the MBST Support Tool
• In the left navigation pane of the Malwarebytes Support Tool, click Advanced
• In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
• A zip file named mbst-grab-results.zip will be saved to the Public desktop, please upload that file on your next reply

Thank you

 

 

[Robin2020]

Complete

mbst-grab-results.zip

[AdvancedSetup]

Please run the following steps and post back the logs as an attachment when ready.
Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans are completed.
Temporarily disable Microsoft SmartScreen to download software below if needed. Make sure to turn it back on once the scans are completed.
If you still have trouble downloading the software please click on Reveal Hidden Contents below for examples of how to allow the download.
 

Spoiler

 

 

 

 

Spoiler

When downloading with some browsers you may see a different style of screens that may block FRST from downloading. The program is safe and used hundreds of times a week by many users.

Example of Microsoft Edge blocking the download

 

STEP 01

• If you already have Malwarebytes installed then open Malwarebytes and click on the Scan button. It will automatically check for updates and run a Threat Scan.
• If you don't have Malwarebytes installed yet please download it from here and install it.
• Once installed then open Malwarebytes and select Scan and let it run.
• Once the scan is completed make sure you have it quarantine any detections it finds.
• If no detections were found click on the Save results drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If there were detections then once the quarantine has completed click on the View report button, Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If the computer restarted to quarantine you can access the logs from the Detection History, then the History tab. Highlight the most recent scan and double-click to open it. Then click the Export drop-down, then the Export to TXT  button, and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
• If Malwarebytes won't run then please skip to the next step and let me know in your next reply that the scanner would not run.

STEP 02

Please download AdwCleaner by Malwarebytes and save the file to your Desktop.

• Double-click to run the program
• Accept the End User License Agreement.
• Wait until the database is updated.
• Click Scan Now.
• When finished, if items are found please click Quarantine.
• Your PC should reboot now if any items were found.
• After reboot, a log file will be opened. Attach or Copy its content into your next reply.

RESTART THE COMPUTER Before running Step 3

STEP 03
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

• Double-click to run it. When the tool opens, click Yes to disclaimer.
• Press the Scan button.
• It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
• The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a check mark here each time
• Please attach the Additions.txt log to your reply as well.
• On your next reply, you should be attaching frst.txt and additions.txt to your post, every time.

 

Thanks

[Robin2020]

Step 2: It says that my PC is free of adware and PUPs but I have preinstalled software from Dell, smartbyte, and Cyberlink...should I quarantine these items?

Scan.txt AdwCleaner[S03].txt Addition.txt FRST.txt

[AdvancedSetup]

The Dell stuff I'd keep. There other stuff is probably rather useless for most people. Up to you if you want to keep.

 

I don't see an obvious reason for Chrome change unless perhaps a Chrome Update did it.

 

 

Please follow the directions from the following topic for a more extensive article on cleaning Google Chrome

Resetting Google Chrome to clear unexpected issues
 

Thank you

 

[Robin2020]

Will do, can you tell me what the attachment is?

[AdvancedSetup]

If you are receiving a pop-up message with this error then kindly try the steps below.
- Click Start
- Click Settings
- Click App & Features > Cortana > Advanced Option > Reset
- Check if you will still encounter the issue

 

[Robin2020]

Complete

[AdvancedSetup]

Did that take care of the popup error?

 

Please run the following @Robin2020

 

 

Please download and run the following Kaspersky Virus Removal Tool 2020 and save it to your Desktop.

(Kaspersky Virus Removal Tool version 20.0.10.0 was released on November 9, 2021)

Download: Kaspersky Virus Removal Tool

How to run a scan with Kaspersky Virus Removal Tool 2020
https://support.kaspersky.com/15674

How to run Kaspersky Virus Removal Tool 2020 in the advanced mode
https://support.kaspersky.com/15680

How to restore a file removed during Kaspersky Virus Removal Tool 2020 scan
https://support.kaspersky.com/15681

 

Select the     Windows Key and R Key together, the "Run" box should open. Drag and Drop KVRT.exe into the Run Box. C:\Users\{your user name}\DESKTOP\KVRT.exe will now show in the run box. add -dontencrypt   Note the space between KVRT.exe and -dontencrypt C:\Users\{your user name}\DESKTOP\KVRT.exe -dontencrypt should now show in the Run box.   That addendum to the run command is very important, when the scan does eventually complete the resultant report is normally encrypted, with the extra command it is saved as a readable file. Reports are saved here C:\KVRT2020_Data\Reports and look similar to this report_20210123_113021.klr Right-click direct onto that report, select > open with > Notepad. Save that file and attach it to your reply. To start the scan select OK in the "Run" box. A EULA window will open, tick all confirmation boxes then select "Accept" In the new window select "Change Parameters" In the new window ensure all selection boxes are ticked, then select "OK" The scan should now start... When complete if entries are found there will be options, if "Cure" is offered leave as is. For any other options change to "Delete" then select "Continue" When complete, or if nothing was found select "Close" Attach the report information as previously instructed...   Thank you

 

 

[Robin2020]

Yes it worked, no more popups. 

report_2023.05.17_12.15.33.klr.txt

[AdvancedSetup]

The fixlist I gave you probably removed it. Kaspersky found nothing @Robin2020

 

 

SecurityCheck by glax24              

I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.

• Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
• If Microsoft SmartScreen blocks the download, click through to save the file
• This tool is safe.   Smartscreen is overly sensitive.
• If SmartScreen blocks the file from running click on More info and Run anyway
• Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
• Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
• You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

 

 

 

 

 

Let me have you get me new logs from this tool as well

 

Please download the following tool

Farbar Service Scanner and run it on the computer with the issue
http://www.bleepingcomputer.com/download/farbar-service-scanner/dl/62/

 

Make sure the following options are checked:

• Internet Services
• Windows Firewall
• System Restore
• Security Center/Action Center
• Windows Update
• Windows Defender

Click "Scan"

It will create a log (FSS.txt) in the same directory the tool is run.
Please attach the log to your next reply.

 

Thanks

 

[Robin2020]

SecurityCheck.txt FSS.txt

[AdvancedSetup]

Please open Malwarebytes, click on the small gear icon to go to Settings. On the General tab click on the Check for updates button. @Robin2020

Then update the following other programs as well

• Cisco Webex Meetings v.41.10.4.4 Warning! Download Update
• Skype for Business Basic 2016 - en-us v.16.0.16327.20214 Warning! This software is no longer supported. Please use Microsoft Teams.
• Zoom v.5.11.1 (6602) Warning! Download Update

 

Then do the following

 

Please make the following change in Malwarebytes if you're using the Premium or Trial version

• Please open Malwarebytes. Click on the small gear icon to open the Settings and go to the Security tab.
• Then turn off "Always register Malwarebytes in the Windows Security Center"
• Restart the computer

 

It is highly unlikely that you need to setup exclusions for Windows Defender, however if you experience any issues, please see the following article.

Malwarebytes for Windows antivirus exclusions list
https://support.malwarebytes.com/hc/en-us/articles/360038522974-Malwarebytes-for-Windows-antivirus-exclusions-list

We are not aware of any currently known issues between Windows Defender and Malwarebytes Premium

 

Restart the computer again and run the FSS scanner again and post back the new log

Thanks

 

[Robin2020]

ok

FSS.txt

[AdvancedSetup]

Great, that looks good.

How is the computer running now @Robin2020

Are you still experiencing issues?

 

[Robin2020]

It's actually doing well...👏

 

[AdvancedSetup]

Excellent, glad to hear @Robin2020

 

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

• right-click kprm_(version).exe and select Run as Administrator.
• Read and accept the disclaimer.
• When the tool opens, ensure all boxes under Actions are checked.
• Under Delete Quarantines select Delete Now, then click Run.
• Once complete, click OK.
• A log will open in Notepad titled kprm-(date).txt.
• Please attach that file to your next reply. (not compulsory)

 

1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
   https://www.howtogeek.com/240255/password-managers-compared-lastpass-vs-keepass-vs-dashlane-vs-1password/
2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download
4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

•   Google Chrome: https://chrome.google.com/webstore/detail/malwarebytes-browser-guar/ihcjicgdanjaechkgeegckofjjedodee
•   Microsoft Edge: https://support.malwarebytes.com/hc/en-us/articles/4413298736787-Install-Malwarebytes-Browser-Guard-on-Microsoft-Edge-browser
•   Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/malwarebytes/

uBlock Origin

• Google Chrome: https://chrome.google.com/webstore/detail/ublock-origin/cjpalhdlnbpafiamejdnhcphjbkeiagm 
• Microsoft Edge: https://microsoftedge.microsoft.com/addons/detail/ublock-origin/odfafepnkmbhccpbejgmiehpchacaeak 
• Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/ublock-origin

 

Further reading if you like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes

 

[Robin2020]

Thank you!

kprm-20230518172055.txt

[AdvancedSetup]

Great, all good.

I will go ahead and close your topic now @Robin2020 and wish you well.

Take care and stay safe out there

Cheers

 

[Robin2020]

Thanks for you help. All the best.

[AdvancedSetup]

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread. Other members who need assistance please start your own topic in a new thread.

Please review the following to help you better protect your computer and privacy Tips to help protect from infection

Thank you