Trojan.BitCoinMiner and RiskWare.BitCoinMiner keep returning

[Anthik]

If i wait a bit of time they always return, and before that windows defender kept finding something like a tamper every boot.

AdwCleaner[C00].txt report.txt Addition.txt FRST.txt

[Maurice Naggar]

Hello  

I will guide you along on looking for remaining malware. Lets keep these principles as we go along.

• Removing malware can be unpredictable
• Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
• Only run the tools I guide you to.
• Do not run online games while case is on-going. Do not do any free-wheeling web-surfing.
• The removal of malware isn't instantaneous, please be patient.
• Cracked or or hacked or pirated programs are not only illegal, but also will make a computer a malware victim. Having such programs installed, is the easiest way to get infected. It is the leading cause of ransomware encryptions. It is at times also big source of current trojan infections. Please uninstall them now, if any are here, before we start the cleaning procedure.
• Please stick with me until I give you the "all clear".
• If your system is running Discord, please be sure to Exit out of it while this case is on-going.

[Maurice Naggar]

Please set File Explorer to SHOW ALL folders, all files, including Hidden ones. Use OPTION ONE or TWO of this article
Please use this Guide

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted items from a system. This tool does not install. It is run on-demand.

This link is for the 64-bit version of MSERT.exe . Be sure you save the file first
https://definitionupdates.microsoft.com/download/DefinitionUpdates/safetyscanner/amd64/MSERT.exe

Upon completion of the save, Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well

Launch MSERT.exe
Accept the agreement terms of Microsoft
Select CUSTOM scan
Look on Scan Options & select CUSTOM scan & then select the C drive to be scanned.

Then start the scan. Have lots of patience. Once you start the scan & you see it started, then leave it be.

Once you see it has started, take a long long break; walk away. Do not pay credence if you see some intermediate early flash messages on screen display. The only things that count are the End result at the end of the run.
Again, any on-screen display about repeat 'infection' is not to be relied on. Ignore those.
We only rely on the end result that is on the log-report-file.

This is likely to run for many hours ( depending on number of files on your machine & the speed of hardware.)

The log is named MSERT.log

the log will be at

Windows\debug\msert.log
Please attach that log with your reply

It is normal for the Microsoft Safety Scanner to show 'detections' during the scan process on the screen itself.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

[Anthik]

msert.log

[Maurice Naggar]

One other scan here.

TrendMicro HouseCall scan
https://www.trendmicro.com/en_us/forHome/products/housecall.html

First, Download & Save to your Downloads folder the appropriate HouseCallLauncher
Once the download is complete, go to where the Housecalllauncher is saved & double-click it to start it.

The program will check with TrendMicro & do a update run.

Next it will show the Disclosure window.

Click Next to proceed.

The end user license agreement is presented.   Click the Accept radio button & click Next to proceed.

I suggest a CUSTOM scan on C drive.

IF you wish a Full scan or a Custom scan, first click on the Settings

then you can select which drives you want to include in the scan.

The default is a Quick scan.

Click Scan now when ready.

The scan progress will then be displayed.   Monitor the progress or just leave it alone until it finishes this phase.

When the scan phase has completed, if any items are tagged, you will see a list, showing  the file & its location, the classification of the threat, the type, risk, and Action option.

If you see an item that you know is safe, you can click the Action  , and select Ignore.

When all done & ready, click the Fix now button.

[Anthik]

it fixed the threat, do i have to do anything else?

[Maurice Naggar]

Hi. Glad to hear the news. I'd like to be sure to run this next run ( even if it seems quite 'wordy'. I do want to see the report after it has finished.
Do a new scan with Malwarebytes for Windows.
Do a Check for Update using the Malwarebytes Settings >> General tab.

See this Support Guide https://support.malwarebytes.com/hc/en-us/articles/360042187934-Check-for-updates-in-Malwarebytes-for-Windows

When it shows a new version available, Accept it and let it proceed forward.  Be sure it succeeds.

If prompted to do a Restart, just please follow all directions.

Let me know how that goes.    Next, the Malwarebytes scan

Next, click the small x on the Settings line to go to the main Malwarebytes Window.   Next click the blue button marked Scan.

 

When the scan phase is done, be real sure you Review and have all detected lines items check-marked on each line on the left. That too is very critical.

>>>>>>      👉      You can actually click the topmost left  check-box  on the very top line to get ALL lines  ticked   ( all selected).         <<<<     💢

 

Please double verify you have that TOP  check-box tick marked.   and that then, all lines have a tick-mark

 

Then click on Quarantine  button.

 

Then, locate the Scan run report;  export out a copy;  & then attach in with your  reply.
See https://support.malwarebytes.com/hc/en-us/articles/360038479194-View-Reports-and-History-in-Malwarebytes-for-Windows-v4

😉

[Anthik]

no updates and the scan bring up nothing now

report1.txt

[Maurice Naggar]

That report is Great 😃 Next one other diagnostic report.

Temporarily disable Microsoft SmartScreen to download the next software below 

I would recommend getting a readout report as to update status of some key apps.
Download SecurityCheck by glax24 from here

and save the tool on the desktop.

                   If Windows's  SmartScreen block that with a message-window, then
                         Click on the MORE INFO spot and over-ride that and allow it to proceed.

                             This tool is safe.   Smartscreen is overly sensitive.

Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"   and reply YES to allow to run & go forward
Wait for the scan to finish. It will open in a text file named SecurityType.txt. Close the file.  Attach it with your next reply.
You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

When all done, you may go back to turn ON the EDGE Smartscreen protection.

( 2 )

You should be sure to get the Fall 2022 Feature Update of Windows 10 a.k.a build 19045. When you see the Feature Update select it for download and action.

I would highly suggest to insure that this pc is all up-to-date with security updates & cumulative updates on Windows. select the Windows Start  button, and then go to Settings  > Update & Security  > Windows Update . and click Check for Updates.
Have much patience.

[Anthik]

SecurityCheck.txt

[Maurice Naggar]

• There is a newer version of Malwarebytes for Windows. I would suggest that you insure to have the latest.
• Do a Check for Update using the Malwarebytes Settings >> General tab.
• See this Support Guide https://support.malwarebytes.com/hc/en-us/articles/360042187934-Check-for-updates-in-Malwarebytes-for-Windows
• When it shows a new version available, Accept it and let it proceed forward.  Be sure it succeeds.
• If prompted to do a Restart, just please follow all directions.

AMD Software v.22.11.2   Warning! Download Update
Notepad++ (64-bit x64) v.8.4.5   Warning! Download Update

7-Zip 21.07 (x64) v.21.07   Warning! Download Update
Uninstall old version and install new one.

paint.net v.4.3.11   Warning! Download Update

Discord v.1.0.9004   Warning! Download Update

ProtonVPN v.2.2.0   Warning! Download Update

qBittorrent 4.4.3.1 v.4.4.3.1   Warning! Download Update

Audacity 3.2.4 v.3.2.4   Warning! Download Update

[  Do a Quick Scan with Microsoft Defender Antivirus ]

Just want to do a visual check in Windows Security to see (visually) that Microsoft Defender is on , and to do a Custom scan.

From the Windows Start menu, select Settings, then select Update and Security.

Next, look at the left-side menu & select Windows Security

Next, In Windows Security section: Click on the grey button Open Windows Security

Now, click on the shield Virus and threat protection

Look to see that Microsoft Defender is shown & available for use.

On the next display, look at all the options.  Look down the list and see "Check for Updates" .

You should click on that to have the system check for updates for Windows Defender.  Watch & wait for that to complete.

Please also note that the Scan options (all) can be displayed by clicking on Scan options.   Click that & select QUICK scan  & have it go forward.

Let me know the results.

[Anthik]

i did and things are still the same. In fact while a few days have passed, the threats are back

[Anthik]

windows defender still says tampering tool

 

[Anthik]

i've actually discovered what program it is but it comes back after every restart

[Maurice Naggar]

I would like a report set for review. This is a report only.

Please download MALWAREBYTES MBST Support Tool

Once you start it click Advanced >>> then Gather Logs

Have patience till the run has finished.
Attach the mbst-grab-results.zip from the Desktop to your reply..

[Anthik]

mbst-grab-results.zip

[Maurice Naggar]

Please set File Explorer to SHOW ALL folders, all files, including Hidden ones. Use OPTION ONE or TWO of this article
Please use this Guide

Please run the following custom script. Read all of this before you start. Please Close all open work.

FRSTENGLISH.exe is already on this machine on Downloads

lease download the attached fixlist.txt file and save it to Downloads folder

Fixlist.txt<-- - - - -

NOTE. It's important that both files, FRSTENGLISH, and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Use File Explorer to go to the Downloads folder

RIGHT-Click on   FRSTENGLISH and select

RUN as Administrator

and reply YES to allow it to go forward to start.

That is important so that this run has Elevated Administrator rights !!

NEXT press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Downloads folder (Fixlog.txt) . Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files.  It will rebuild the Winsock. It will attempt to run scans with MS Defender. Depending on the speed of your computer this fix may take 50-55 minutes or more.

The system will be rebooted after the script has finished. Attach FIXLOG.txt with next reply.

After this, provide me a overall sense of how things are.

[Anthik]

seems to have stopped, thank you

Fixlog.txt

[Maurice Naggar]

Protezione risorse di Windows: file danneggiati trovati e ripristinati.

In English, Windows Resource Protection: Corrupted files found and repaired. The Windows System File Checker made fixes.

The custom-script run is good.

[  Do a custom scan with Microsoft Defender Antivirus ]

Just want to do a visual check in Windows Security to see (visually) that Microsoft Defender is on , and to do a Custom scan.

From the Windows Start menu, select Settings, then select Update and Security.

Next, look at the left-side menu & select Windows Security

Next, In Windows Security section: Click on the grey button Open Windows Security

Now, click on the shield Virus and threat protection

Look to see that Microsoft Defender is shown & available for use.

On the next display, look at all the options.  Look down the list and see "Check for Updates" .

You should click on that to have the system check for updates for Windows Defender.  Watch & wait for that to complete.

Please also note that the Scan options (all) can be displayed by clicking on Scan options.   Click that & select CUSTOM scan & then pick the C drive  & have it go forward.

Once it has started the scan phase, you can go take a long break.   Let me know the results.

[AdvancedSetup]

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks