File detected Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compile.exe

[Zestrix]

Hello, I have question about Malwarebytes always alert detected in Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compile.exe and I scan result is not detected.

Thank you for your help.

I've followed the below link and at running Microsoft Safety Scanner step.

Edited May 2 by AdvancedSetup
Corrected font issues

[1PW]

Hello @Zestrix and :

While you are waiting for the next qualified/approved malware removal expert helper to weigh in on your topic, and even though you may have run the following Malwarebytes utility, or its subsets, please carefully follow these instructions:

1. Download the Malwarebytes Support Tool.
2. In your Downloads folder, open the mb-support-x.x.x.xxx.exe file.
3. In the User Account Control (UAC) pop-up window, click Yes to continue the installation.
4. Run the MBST Support Tool.
5. In the left navigation pane of the Malwarebytes Support Tool, click Advanced.
6. In the Advanced Options, click only Gather Logs. A status diagram displays the tool is Getting logs from your computer.
7. A zip file named mbst-grab-results.zip will be saved to the Public desktop, please attach that file in your next reply to this topic. Please do NOT copy and paste.

For the short time between when you post the diagnostic logs, and when your helper weighs in, please take no further self-directed remedial actions that will invalidate the diagnostic logs you will have sent.

Thank you.

[AdvancedSetup]

Hello @Zestrix

Please post back the requested log so that we can review to assist you.

Thank you

 

[Zestrix]

Hello,

I downloaded MSBTSupport Tool. After clicking on it, there was FRSTEnglish.exe appeared in the folder and MSBT Support tool is not showing anywhere.

Thanks

[Maurice Naggar]

<<pardon intrusion>> Zestrix, look on the desktop. There do you see  mbst-grab-results.zip ? If yes, that is what we need you to attach in a reply. In the same goal at hand ( of having some diagnostic reports), look on your Downloads folder. Do you see a FRST.txt

Do you see a Addition.txt. Those 2 reports would also be a big help.

[Zestrix]

Hello, I tried a lot but the mbst-grab-results.zip is not available on the desktop and Microsoft Defender detects this everyday:

[AdvancedSetup]

Okay, for now, please get us logs using this method @Zestrix

 

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit

• Double-click to run it. When the tool opens click Yes to disclaimer.
• Press the Scan button.
• It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
• The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

Thank you

 

 

[Zestrix]

Hello,

I've followed those instructions mentioned above and attached the files.

Thank you

Addition.txt FRST.txt

[AdvancedSetup]

Please run the following fix  @Zestrix

 

NOTE: Please read all of the information below before running this fix.

• NOTICE: This script was written specifically for this user, for use on this particular machine.
• Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRSTEnglish.exe

Save the attached file:  FIXLIST.TXT to this folder C:\Users\shrey\Downloads\

NOTE. It's important that both files, FRSTEnglish.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed in most, but not all cases.
3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

• Windows Temp
• Users Temp folders
• Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
• Recently opened files cache
• Discord cache
• Java cache
• Steam HTML cache
• Explorer thumbnail and icon cache
• BITS transfer queue (qmgr*.dat files)
• Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

[Zestrix]

Hello.

I ran the fix and have attached the fixlog.txt.

Thanks

Fixlog.txt

[AdvancedSetup]

Thank you for the log @Zestrix

Please run the following 3rd party AV scanner from ESET.

 

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

• It will start a download of "esetonlinescanner.exe"
• Save the file to your system, such as the Downloads folder, or else to the Desktop.
• Go to the saved file, and double click it to get started. 
• When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
• On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
• When prompted for scan type, Click on the Full Scan button
• Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
• Have patience.  The entire process may take a few hours or more.
• When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
• Click The blue “Save scan log” to save the log and give it a name and location you remember.
• If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
• Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
• Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

[Zestrix]

Hello,

I've completed a full scan using ESET Online Scanner and attached the log file.

Thank you!

ESET_1805.txt

[AdvancedSetup]

Thank you for the log. @Zestrix

Please run the following additional scanner

 

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

• Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
• The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

 

[Zestrix]

Hello,

I did a full scan and have attached the log.

Thanks

msert.log

[AdvancedSetup]

Great, that looks good.

Are  you still getting an alert or blocking ?

 

Please run the following now @Zestrix

 

SecurityCheck by glax24              

I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.

• Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
• If Microsoft SmartScreen blocks the download, click through to save the file
• This tool is safe.   Smartscreen is overly sensitive.
• If SmartScreen blocks the file from running click on More info and Run anyway
• Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
• Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
• You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

 

 

Thank you

 

 

[Zestrix]

Hello,

No alerts are showing but I was getting actions needed in Windows Defender notifications and I checked the protection history and kept seeing the below threat since first week of May, so I reached out in the forum. I also did a quick scan today and no new entry in protection history after 17/5/2023.

 

 

SecurityCheck.txt

[AdvancedSetup]

Please uninstall, update, or otherwise address the following as appropriate for your system

 

 

• Cisco Webex Meetings v.42.9.0 Warning! Download Update
• Discord v.1.0.9001 Warning! Download Update
• Git version 2.31.1 v.2.31.1 Warning! Download Update
• iTunes v.12.11.3.17 Warning! Download Update | ^Please use Apple Software Update tool.^
• Java 8 Update 361 (64-bit) v.8.0.3610.9 Warning! Download Update | Uninstall old version and install new one (jre-8u371-windows-x64.exe).
• Java SE Development Kit 8 Update 361 (64-bit) v.8.0.3610.9 Warning! This software is no longer supported. Please uninstall it and use Java SE Development Kit (jdk-20_windows-x64_bin.exe).
• Malwarebytes version 4.5.24.248 v.4.5.24.248 Warning! Please open Malwarebytes, click the small gear icon, then on General tab click the Check for updates button
• Microsoft OneDrive v.23.086.0423.0001 Warning! Download Update
• Microsoft Visual Studio Code (User) v.1.74.3 Warning! Download Update
• Mozilla Firefox (x64 en-US) v.112.0.2 Warning! Download Update
• Notepad++ (64-bit x64) v.8.4.9 Warning! Download Update
• Slack v.4.27.154 Warning! Download Update
• Spotify v.1.1.88.612.gcc529952 Warning! Download Update
• VLC media player v.3.0.12 Warning! Download Update
• WinRAR 6.01 (64-bit) v.6.01.0 Warning! Download Update
• Zoom v.5.13.11 (13434) Warning! Download Update

 

---------------------------- [ UnwantedApps ] -----------------------------
Bonjour v.3.1.0.1 Warning! Application is distributed through the partnership programs and bundle assemblies. Uninstallation recommended.

 

Then restart the computer and check for Windows Updates and install any found.

Then restart the computer again and let me know how things are working now and if you're still seeing any issues.

Thanks @Zestrix

 

 

Edited May 21 by AdvancedSetup
Updated information

[Zestrix]

Hello,

After I ran the fixlist.txt, my laptop always restarts automatically after I turn it on and enter my password. It happens once every time I power on my laptop.

Thanks

[AdvancedSetup]

Please post back some updated logs for Farbar

 

 

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit

• Double-click to run it. When the tool opens click Yes to disclaimer.
• Press the Scan button.
• It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
• The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

Thank you

 

 

[AdvancedSetup]

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks