Jump to content

RTP Detection block outbound connection every hour or so


Recommended Posts

Hi, I'm new here, but I've been using your product for the last two years. Since a week, RTP Detection constantly send pop-up screen telling me that an outbound connection have been blocked. It's my first time using this forum, so I will surely need help with the files I need to send to you to help me ... 

I will also add that the scan doesn't detect anything...

Thanks in advance !

Blocked Outbound connection.txt

Link to post
Share on other sites

 

While you are waiting for the next qualified/approved malware removal expert helper to weigh in on your topic, and even though you may have run the following Malwarebytes utility or its subsets, please carefully follow these instructions:

  1. Download the Malwarebytes Support Tool.
  2. In your Downloads folder, open the mb-support-x.x.x.xxx.exe file.
  3. In the User Account Control (UAC) pop-up window, click Yes to continue the installation.
  4. Run the MBST Support Tool.
  5. In the left navigation pane of the Malwarebytes Support Tool, click Advanced.
  6. In the Advanced Options, click only Gather Logs. A status diagram displays the tool is Getting logs from your computer.
  7. A zip file named mbst-grab-results.zip will be saved to the Public desktop, please attach that file in your next reply to this topic. Please do NOT copy and paste.

For the short time between when you post the diagnostic logs, and when your helper weighs in, please take no further self-directed remedial actions that will invalidate the diagnostic logs you will have sent.

Thank you.

Link to post
Share on other sites

  • Root Admin

Off topic. I see in your logs the following. That was a really cool screen saver back in the day. @Rasgolov

Jazz Jackrabbit 2

 

 

Please run the following fix

NOTE: Please read all of the information below before running this fix.

  • NOTICE: This script was written specifically for this user, for use on this particular machine.
  • Running this on another machine may cause damage to your operating system that cannot be undone.

Once the fix has been completed, please attach the file FIXLOG.TXT to your next reply

Farbar program:   FRSTEnglish.exe

Save the attached file:  FIXLIST.TXT to the same location as the Farbar program

NOTE. It's important that both files, FRSTEnglish.exe, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

 

 

Run the Farbar program with Admin rights and press the Fix button just once and wait.

The fix may possibly take up to 60 minutes to complete

If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named Fixlog.txt in the same folder you ran the Farbar program from. Please attach that log on your next reply.

 

  1. NOTE:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity.
  2. NOTE: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications may be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed in most, but not all cases.
  3. NOTE: As part of this fix, it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

Thank you for the log. It was a good run and also found and fixed the following @Rasgolov

Windows Resource Protection found corrupt files and successfully repaired them.

 

Please run the following

 

Please run the following ESET Online Scanner and perform a Full Scan

 

Click the following link to save the installer for ESET Online Scanner

https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get started. 
  • When presented with the initial ESET screen, click on "Get Started". Read and accept the Terms of use
  • On the "Before we start..." screen chose if you want to send anonymous data and if you want to provide feedback or not, then click Continue
  • When prompted for scan type, Click on the Full Scan button
  • Enable  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click the Start scan button.
  • Have patience.  The entire process may take a few hours or more.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log and give it a name and location you remember.
  • If something was removed and you know it is a false postive, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to turn off the offer for “periodic scanning”.
  • Enable "Delete application data on closing" - You do not need to submit feedback unless you want to. Simply ignore and close the program.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Please attach the ESET scan log you saved at the end to your next reply

 

Link to post
Share on other sites

  • 3 weeks later...
  • Root Admin

Okay, thank you @Rasgolov

Please run the following

 

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process.

It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

Thank you

 

Link to post
Share on other sites

  • 1 month later...
  • Root Admin

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Tips to help protect from infection

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.