I just want to check my PC for virus

[unknownguy]

I want help to check if I have virus in my computer. I would appreciate help with this.

I have only noticed weird behavior such as files get deleted and makes them hidden from me.  

[unknownguy]

And here comes the logs.

FRST.txt Addition.txt

[AdvancedSetup]

Hello @unknownguy

The biggest risk on your system is P2P file sharing.

 

The act of torrenting itself is not illegal. However, downloading and sharing unsanctioned copyrighted material is illegal, and there is always a chance of prosecution if caught by the authorities.
Torrenting non-copyrighted material is perfectly fine and is allowed. However, be aware that we have seen increased malware bundled with software downloads over P2P.

Recent Ransomware infections have been seen to encrypt user data so that no one can decrypt the data without the private key.
When sharing files, please keep in mind that you're increasing your system's attack surface area, which can increase the risk of infection.

Scan all files before running them. https://www.virustotal.com

If you don't need or use the P2P software, you should uninstall it.

Risks of File-Sharing Technology by the Cybersecurity & Infrastructure Security Agency
https://www.cisa.gov/uscert/ncas/tips/ST05-007

 

 

 

Please run the fix below, once the fix has completed, please attach the FIXLOG.TXT file to your next reply.

 

Please download the attached fixlist.txt file and save it to the Desktop or location where you ran FRST from.
NOTE. It's important that both files, FRST or FRST64, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt) or wherever you ran FRST from. Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity. Depending on the speed of your computer this fix may take 30 minutes or more.

NOTE-2: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications will be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed. The use of an external password manager is highly recommended instead of using your browser to store passwords.

NOTE-3: As part of this fix it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

• Windows Temp
• Users Temp folders
• Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
• Recently opened files cache
• Discord cache
• Java cache
• Steam HTML cache
• Explorer thumbnail and icon cache
• BITS transfer queue (qmgr*.dat files)
• Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

[unknownguy]

A little late answer. Here is the logs.

Qbittorent is only used for downloading legal files. Such as: Gimp, LibreOffice, Linux Distros.

Fixlog.txt

Edited September 27, 2022 by unknownguy

[AdvancedSetup]

Thank you for the log. Looks pretty good overall.

Let me have you run the following, please @unknownguy

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

• Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
• The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

 

[unknownguy]

So I'm finished. There was nothing in this msert file of interests. But thanks to this tool it found 3 files and removed them. They was not in the log.

[AdvancedSetup]

I would still like to see the log please

 

Please run the scanner below. I'll check back on you tomorrow @unknownguy

 

SecurityCheck by glax24              

I would like you to run a tool named SecurityCheck to inquire about the current security update status of some applications.

• Download SecurityCheck by glax24: https://tools.safezone.cc/glax24/SecurityCheck/SecurityCheck.exe
• If Microsoft SmartScreen blocks the download, click through to save the file
• This tool is safe.   Smartscreen is overly sensitive.
• If SmartScreen blocks the file from running click on More info and Run anyway
• Right-click  with your mouse on the Securitycheck.exe  and select "Run as administrator"  and reply YES to allow to run & go forward
• Wait for the scan to finish. It will open a text file named SecurityCheck.txt Close the file.  Attach it with your next reply.
• You can find this file in a folder called SecurityCheck, C:\SecurityCheck\SecurityCheck.txt

 

 

Thank you

 

 

[unknownguy]

Here is the glax24, I have not been looking at SUMo (Software Update Monitor) today. But I saw some updates is needed in the log file. But I post it anyway.

Privazer does not clean registry (Options turned off), it does not have driver updater, it is not a hijacking tool. But yeah whatever.

SecurityCheck.txt

Edit: I updated everything. I'm fine with the previous scanners. Thanks so much for the help.

Edited September 28, 2022 by unknownguy

[AdvancedSetup]

Great, if you're all set and no more issues, please review the following @unknownguy

 

 

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

• right-click kprm_(version).exe and select Run as Administrator.
• Read and accept the disclaimer.
• When the tool opens, ensure all boxes under Actions are checked.
• Under Delete Quarantines select Delete Now, then click Run.
• Once complete, click OK.
• A log will open in Notepad titled kprm-(date).txt.
• Please attach that file to your next reply. (not compulsory)

 

1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
   https://www.howtogeek.com/240255/password-managers-compared-lastpass-vs-keepass-vs-dashlane-vs-1password/
2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download
4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

•   Google Chrome: https://chrome.google.com/webstore/detail/malwarebytes-browser-guar/ihcjicgdanjaechkgeegckofjjedodee
•   Microsoft Edge: https://support.malwarebytes.com/hc/en-us/articles/4413298736787-Install-Malwarebytes-Browser-Guard-on-Microsoft-Edge-browser
•   Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/malwarebytes/

uBlock Origin

• Google Chrome: https://chrome.google.com/webstore/detail/ublock-origin/cjpalhdlnbpafiamejdnhcphjbkeiagm 
• Microsoft Edge: https://microsoftedge.microsoft.com/addons/detail/ublock-origin/odfafepnkmbhccpbejgmiehpchacaeak 
• Mozilla Firefox: https://addons.mozilla.org/en-US/firefox/addon/ublock-origin

 

Further reading if you like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes

 

[unknownguy]

This thread can now be solved. I formatted my harddrives and have no issues anymore. Thanks so much for you help.

[AdvancedSetup]

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread. Other members who need assistance please start your own topic in a new thread.

Please review the following to help you better protect your computer and privacy Tips to help protect from infection

Thank you