Jump to content

Wont let me install Malwarebytes Please help


Recommended Posts

  • Root Admin

Hello  and  :welcome:      @ItsAllo

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow all steps in the provided order and post back all requested logs
  • Please attach all log files to your post, unless otherwise requested
  • Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
  • Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim. Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections. If there are any on the system you should uninstall them before we proceed.
  • Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
  • If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

To begin, please do the following so that we may take a closer look at your installation for troubleshooting. This is a report only.

 

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

Thank you

 

 

Link to post
Share on other sites

9 minutes ago, AdvancedSetup said:

Hello  and  :welcome:      @ItsAllo

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow all steps in the provided order and post back all requested logs
  • Please attach all log files to your post, unless otherwise requested
  • Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
  • Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim. Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections. If there are any on the system you should uninstall them before we proceed.
  • Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
  • If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

To begin, please do the following so that we may take a closer look at your installation for troubleshooting. This is a report only.

 

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). Please attach it to your reply as well.

Thank you

 

 

image.thumb.png.aeab920a4d22e8f4876150741c0d197e.pngI tried to install it but it says it isnt found

 

Link to post
Share on other sites

  • Root Admin

Please run the following

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

 

Link to post
Share on other sites

If I'm allowed to intervene, @ItsAllo, please download AV block remover, unzip it and run.

If you possibly couldn't run it, simply rename AVbr.exe -> AV-b-r.exe for expamle and run. At least run in in Safe mode with network if renaimed failed too. Follow the instructions. After reboot you should have AV_block_remove_date-time.log. Please attach it to your next post.

Edited by Sandor
Link to post
Share on other sites

13 minutes ago, Sandor said:

If I'm allowed to intervene, @ItsAllo, please download AV block remover, unzip it and run.

If you possibly couldn't run it, simply rename AVbr.exe -> AV-b-r.exe for expamle and run. At least run in in Safe mode with network if renaimed failed too. Follow the instructions. After reboot you should have AV_block_remove_date-time.log. Please attach it to your next post.

Was able to get malwarebytes to finally install due to the rename aswell. 

Link to post
Share on other sites

  • Root Admin

Thank you for the logs @ItsAllo and @Sandor

 

 

Are you sure you want this enabled or allowed? Push Notifications on your browser appear to be enabled.

https://blog.malwarebytes.com/security-world/technology/2019/01/browser-push-notifications-feature-asking-abused/

Turn notifications on or off - Google Chrome

Web Push notifications in Firefox

CHR Notifications: Default -> hxxps://gfuel.os.tc; hxxps://gzawq.gserience.xyz; hxxps://kissanime.ru; hxxps://kms-auto.site; hxxps://twitter.com; hxxps://www.instagram.com; hxxps://www.netflix.com; hxxps://www.youtube.com; hxxps://www1.lucienmann.pro

 

Please run the following fix. Once the fix has completed, please attach the FIXLOG.TXT file to your next reply.

 

 

 

 

Please download the attached fixlist.txt file and save it to the Desktop or location where you ran FRST from.
NOTE. It's important that both files, FRST or FRST64, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt) or wherever you ran FRST from. Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity. Depending on the speed of your computer this fix may take 30 minutes or more.

NOTE-2: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications will be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed. The use of an external password manager is highly recommended instead of using your browser to store passwords.

NOTE-3: As part of this fix it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites

  • Root Admin

Great, that looks good so far. Let me have you run the following.

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.