Jump to content

Undected Malware by Malwarebytes

Rivenbeak007
 Share

Recommended Posts

Rivenbeak007

Rivenbeak007

Posted
Posted

Hi, I found multiple files that shouldn't be on my laptop in the protected section of Malwarebytes as well as in my files themselves but even though I turned it off from being protected Malwarebytes can't seem to find the files and I can't either. I've run multiple custom scans and looked at all the help articles + tried reinstalling Malwarebytes but I can't seem to figure it out on my own. Can someone please help me?

 

Malwarebytes.txt

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Hello  and  :welcome:      @Rivenbeak007

 

My screen name is AdvancedSetup and I will assist you with your system issues.
 

Let's keep these principles as we proceed. Make sure to read the entire post below first.

  • Please follow all steps in the provided order and post back all requested logs
  • Please attach all log files to your post, unless otherwise requested
  • Temporarily disable your antivirus or other security software first. Make sure to turn it back on once the scans have been completed.
  • Temporarily disable Microsoft SmartScreen to download the software below if needed. Make sure to turn it back on once the scans are completed.
  • Searching, detecting, and removing malware isn't instantaneous and there is no guarantee to repair every system.
  • Before we start, please make sure that you have an external backup, not connected to this system, of all private data.
  • Do not run online games while the case is ongoing. Do not do any free-wheeling or risky web-surfing.
  • Only run the tools I guide you to use. Please don't run any other scans, download, install or uninstall any programs while I'm working with you.
  • Cracked, Hacked, or Pirated programs are not only illegal but also can make a computer a malware victim. Having such programs installed is the easiest way to get infected. It is the leading cause of ransomware encryption. It is at times also a big source of current Trojan infections. If there are any on the system you should uninstall them before we proceed.
  • Please be patient and stick with me until I give you the "all clear". We don't want to waste your time, please don't waste ours.
  • If your system is running Discord, please be sure to Exit it while this case is ongoing.

 

To begin, please do the following so that we may take a closer look at your installation for troubleshooting. This is a report only.

NOTE: The tools and the information obtained are safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to your desktop, please upload that file on your next reply

Thank you

 

Link to post
Share on other sites
Rivenbeak007

Rivenbeak007

Posted
  • Author
Posted

Okay I'm just concerned because my brother who used to work IT is convinced there's something wrong with my laptop because my computer has gotten significantly slower than it used to be + the bandwidth in my house becomes practically unusable for everyone ONLY when I'm using my laptop. 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

 

Let me have you run a different scanner to double-check. Temporarily disable any other security software while it's running. Make sure to turn it back on when done.

 

I would suggest a free scan with the ESET Online Scanner

Go to https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get it started. 
  • When presented with the initial ESET options, click on "Computer Scan".
  • Next, when prompted by Windows, allow it to start by clicking Yes 
  • When prompted for scan type, Click on Full scan 
  • Look at & tick  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click on the Start scan button.
  • Have patience.  The entire process may take an hour or more. There is an initial update download.
  • There is a progress window display.
  • You should ignore all prompts to get the ESET antivirus software program.   ( e.g. their standard program).   You do not need to buy or get or install anything else.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log.
  • If something was removed and you know it is a false finding, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to off the offer for “periodic scanning”.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Okay, let me have you restart the computer. Then run the following fix. @Rivenbeak007

 

Please download the attached fixlist.txt file and save it to C:\Users\siobh\Downloads\
NOTE. It's important that both files, Farbar, and fixlist.txt are in the same location or the fix will not work.

Please make sure you disable any real-time antivirus or security software before running this script. Once completed, make sure you re-enable it.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Run C:\Users\siobh\Downloads\FRSTEnglish.exe with Admin rights and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log named FIXLOG.TXT in this folder C:\Users\siobh\Downloads\   Please attach it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1:  This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files. It will also run a disk check on the restart to ensure disk integrity. Depending on the speed of your computer this fix may take 30 minutes or more.

NOTE-2: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications will be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed. The use of an external password manager is highly recommended instead of using your browser to store passwords.

NOTE-3: As part of this fix it will also reset the network to default settings including the firewall. If you have custom firewall rules you need to save please export or save them first before running this fix.

The following directories are emptied:

  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome, and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Discord cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin

Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

The system will be rebooted after the fix has run.

fixlist.txt

Thanks

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Good run, SFC found and corrected some OS issues.

Windows Resource Protection found corrupt files and successfully repaired them.

 

Please go ahead and run the following scanner from Microsoft

 

Microsoft Safety Scanner

Please make sure you Exit out of any other program you might have open so that the sole task is to run the following scan.   
That goes especially for web browsers, make sure all are fully exited out of and messenger programs are exited and closed as well
 

STEP 1

Please set File Explorer to SHOW ALL folders, all files, including hidden ones.  Use OPTION ONE or TWO of this article

https://www.tenforums.com/tutorials/7078-turn-off-show-all-folders-windows-10-navigation-pane.html

STEP 2

I suggest a new scan for viruses & other malware. This may take several hours, depending on the number of files on the system and the speed of the computer.

The Microsoft Safety Scanner is a free Microsoft stand-alone virus scanner that can be used to scan for & remove malware or potentially unwanted software from a system. 

The download links & the how-to-run-the tool are at this link at Microsoft 

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download

 

Look on the Scan Options & select the FULL scan.

Then start the scan. Have lots of patience. It may take several hours.

  • Once you see it has started, take a long long break;  walk away.  Do not pay credence if you see some intermediate early flash messages on the screen display.  The only things that count are the End result at the end of the run.
  • The scan will take several hours.  Leave it alone. It will remove any other remaining threats as it goes along.  Take a very long break, do your normal personal errands .....just do not use the computer during this scan.

This is likely to run for many hours as previously mentioned  ( depending on the number of files on your machine & the speed of the hardware.)

The log is named MSERT.log  and the log will be at C:\Windows\debug\msert.log

Please attach that log with your next reply.

 

 

It is normal for the Microsoft Safety Scanner to show detections during the scan process. It is scanning for basically all bread crumbs or traces of files and registry entries that "might" be or have been part of some infection or previous infection.

That DOES NOT mean the computer is infected. Once the scan has been completed it uploads the log to their Cloud service which then uses Artificial Intelligence to determine if in fact any of the traces are an infection or not.

Then it writes into the log on your computer what it found.

 

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Great, that only found and corrected the Tamper Setting

Please restart the computer one more time. Then exit out of Malwarebytes and try to run the ESET scanner again.

 

 

Let me have you run a different scanner to double-check. I don't expect it to find anything, but no harm in checking.

I would suggest a free scan with the ESET Online Scanner

Go to https://download.eset.com/com/eset/tools/online_scanner/latest/esetonlinescanner.exe

  • It will start a download of "esetonlinescanner.exe"
  • Save the file to your system, such as the Downloads folder, or else to the Desktop.
  • Go to the saved file, and double click it to get it started. 
  • When presented with the initial ESET options, click on "Computer Scan".
  • Next, when prompted by Windows, allow it to start by clicking Yes 
  • When prompted for scan type, Click on Full scan 
  • Look at & tick  ( select )   the radio selection "Enable ESET to detect and quarantine potentially unwanted applications"   and click on the Start scan button.
  • Have patience.  The entire process may take an hour or more. There is an initial update download.
  • There is a progress window display.
  • You should ignore all prompts to get the ESET antivirus software program.   ( e.g. their standard program).   You do not need to buy or get or install anything else.
  • When the scan is completed, if something was found, it will show a screen with the number of detected items.  If so, click the button marked “View detected results”.
  • Click The blue “Save scan log” to save the log.
  • If something was removed and you know it is a false finding, you may click on the blue ”Restore cleaned files”  ( in blue, at the bottom).
  • Press Continue when all done.  You should click to off the offer for “periodic scanning”.

 

Note: If you do need to do a File Restore from ESET please follow the directions below

[KB2915] Restore files quarantined by the ESET Online Scanner version 3

https://support.eset.com/en/kb2915-restore-files-quarantined-by-the-eset-online-scanner

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Can you please do the following?

  • Download the Malwarebytes Support Tool
  • In your Downloads folder, open the mb-support-x.x.x.xxx.exe file
  • In the User Account Control pop-up window, click Yes to continue the installation
  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click the CLEAN button and follow the onscreen instructions to reinstall Malwarebytes
  • NOTE: Please have patience as it can take a while to remove and reinstall. The computer will restart to complete

After the restart please do the following

  • Run the MBST Support Tool
  • In the left navigation pane of the Malwarebytes Support Tool, click Advanced
  • In the Advanced Options, click Gather Logs. A status diagram displays the tool is Getting logs from your machine
  • A zip file named mbst-grab-results.zip will be saved to your desktop, please upload that file on your next reply

Thank you

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Yes, please restart the computer. There are pending file renames waiting for the reboot. @Rivenbeak007

The cancel error message is not correct. They will fix that in an upcoming build of the tool.

Once you restart the computer let me know if there are any other issues, but we should be good now.

 

Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Let's go ahead and do some clean-up work and remove the tools and logs we've run.

Please download KpRm by kernel-panik and save it to your desktop.

  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt.
  • Please attach that file to your next reply. (not compulsory)

 

  1. Recommend using a Password Manager for all websites, etc. that require a password. Never use the same password on more than one site.
    https://www.howtogeek.com/240255/password-managers-compared-lastpass-vs-keepass-vs-dashlane-vs-1password/
  2. Make sure you're backing up your files https://forums.malwarebytes.com/topic/136226-backup-software/
  3. Keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download
  4. Keep your Operating System up to date and current at all times - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2
  5. Further tips to help protect your computer data and improve your privacy: https://forums.malwarebytes.com/topic/258363-tips-to-help-protect-from-infection/ 
  6. Please consider installing the following Content Blockers for your Web browsers if you haven't done so already. This will help improve overall security

Malwarebytes Browser Guard

uBlock Origin

 

Further reading if you like to keep up on the malware threat scene: Malwarebytes Blog  https://blog.malwarebytes.com/

Hopefully, we've been able to assist you with correcting your system issues.

Thank you for using Malwarebytes

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.