Jump to content

Windows Defenderfinds Trojan viruses but Malware Bytes does not?

AWW7

By AWW7
in Resolved Malware Removal Logs

 Share
Go to solution Solved by kevinf80,

Recommended Posts

AWW7

AWW7

Posted
Posted

Greeting good folks on here

I have a malware issue and has been signposted to there so your good work obviously has been spreading far and wide.

My Windows Defender detected three Trojan viruses during full scan but failed to quarantine them.   I then downloaded various free anti virus programs including Malware Bytes.   None of them picked up the viruses.   I used Defender again several times over few days with same results-  their quarantine program took hours as well.

Is there anyone on here who would be kindly assist?   My posts will be little inconsistent as I have a five months old baby but will try my best to respond soon as I can!   I have included screenshots below.

virus scan results.png

qurantine results.png

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted
Hello AWW7 and welcome to Malwarebytes,

Disable smart screen ONLY if it interferes with software we may have to use:

https://support.microsoft.com/en-us/microsoft-edge/what-is-smartscreen-and-how-can-it-help-protect-me-1c9a874a-6826-be5e-45b1-67fa445a74c8

Please remember to enable when we are finished....

Next,

Disable any Anti-virus software you have installed ONLY if it stops software we may use from working:

https://www.bleepingcomputer.com/forums/t/114351/how-to-temporarily-disable-your-anti-virus-firewall-and-anti-malware-programs/

Please remember to enable AV software when we are finished running scans....

Next,

Lets grab some logs and see whats going on, continue with the following:

If you do not have Malwarebytes installed do the following:

Download Malwarebytes version 4 from the following link:

https://www.malwarebytes.com/mwb-download/thankyou/

Double click on the installer and follow the prompts.

When the install completes or Malwarebytes is already installed do the following:

Open Malwarebytes, select > small cog wheel top right hand corner, that will open "settings" from there select "Security" tab.

Scroll down to "Scan Options" ensure Scan for Rootkits and Scan within Archives are both on....

Close out the settings window, this will take you back to "DashBoard" select the Blue "Scan Now" tab......

When the scan completes quarantine any found entries...

To get the log from Malwarebytes do the following:
 
  • Open Malwarebytes
  • Click on the Detection History tab > from main interface.
  • Then click on "History" that will open to a historical list
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Please use "Text file (*.txt), then name the file and save to a place of choice, recommend "Desktop" then attach to reply


Next,

Download AdwCleaner by Malwarebytes onto your Desktop.

Or from this Mirror
 
  • Right-click on AdwCleaner.exe and select http://i.imgur.com/Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Quarantine button. This will kill all the active processes
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply


Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

Be aware FRST must be run from an account with Administrator status... If English is not your primary language Right click on FRST/FRST64 and rename FRSTEnglish/FRST64English

 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
    user posted image
     
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Let me see those logs in your reply...

Thank you,

Kevin....
Link to post
Share on other sites
AWW7

AWW7

Posted
  • Author
Posted
14 hours ago, kevinf80 said:
Hello AWW7 and welcome to Malwarebytes,

Disable smart screen ONLY if it interferes with software we may have to use:

https://support.microsoft.com/en-us/microsoft-edge/what-is-smartscreen-and-how-can-it-help-protect-me-1c9a874a-6826-be5e-45b1-67fa445a74c8

Please remember to enable when we are finished....

Next,

Disable any Anti-virus software you have installed ONLY if it stops software we may use from working:

https://www.bleepingcomputer.com/forums/t/114351/how-to-temporarily-disable-your-anti-virus-firewall-and-anti-malware-programs/

Please remember to enable AV software when we are finished running scans....

Next,

Lets grab some logs and see whats going on, continue with the following:

If you do not have Malwarebytes installed do the following:

Download Malwarebytes version 4 from the following link:

https://www.malwarebytes.com/mwb-download/thankyou/

Double click on the installer and follow the prompts.

When the install completes or Malwarebytes is already installed do the following:

Open Malwarebytes, select > small cog wheel top right hand corner, that will open "settings" from there select "Security" tab.

Scroll down to "Scan Options" ensure Scan for Rootkits and Scan within Archives are both on....

Close out the settings window, this will take you back to "DashBoard" select the Blue "Scan Now" tab......

When the scan completes quarantine any found entries...

To get the log from Malwarebytes do the following:
 
  • Open Malwarebytes
  • Click on the Detection History tab > from main interface.
  • Then click on "History" that will open to a historical list
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Please use "Text file (*.txt), then name the file and save to a place of choice, recommend "Desktop" then attach to reply


Next,

Download AdwCleaner by Malwarebytes onto your Desktop.

Or from this Mirror
 
  • Right-click on AdwCleaner.exe and select http://i.imgur.com/Spcusrh.pngRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Quarantine button. This will kill all the active processes
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply


Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

Be aware FRST must be run from an account with Administrator status... If English is not your primary language Right click on FRST/FRST64 and rename FRSTEnglish/FRST64English

 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
    user posted image
     
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Let me see those logs in your reply...

Thank you,

Kevin....

 

Hello Kevin

I have followed your instructions up to retriving logs from detection history which was blank with no options to export any logs.   Is this normal?

I have attached a screenshot below

 

 

detection_history_nologs.png

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hiya AWW7,

Thanks for those logs, continue:

Please download the attached fixlist.txt file and save it to the Desktop or location where you ran FRST from.

NOTE. It's important that both files, FRST or FRSTEnglish, and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt) or wherever you ran FRST from. Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1: This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files.

NOTE-2: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications will be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed.

The following directories are emptied:
 
  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Flash Player cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin



Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

user posted image

The system will be rebooted after the fix has run.


Next,

Download "Microsoft's Safety Scanner" and save direct to the desktop

Ensure to get the correct version for your system....

https://docs.microsoft.com/en-us/windows/security/threat-protection/intelligence/safety-scanner-download


Right click on the Tool, select Run as Administrator the tool will expand to the options Window
In the "Scan Type" window, select Full Scan
Perform a scan and Click Finish when the scan is done.


Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\msert.log

The log will include log details for each time MSRT has run, we only need the most recent log by date and time....

Thank you,

Kevin.

fixlist.txt

Link to post
Share on other sites
  • Solution
kevinf80

kevinf80

Posted
  • Solution
Posted

Hiya AWW7,

Thanks for the update, continue:

Please download the attached fixlist.txt file and save it to the Desktop or location where you ran FRST from.

NOTE. It's important that both files, FRST or FRSTEnglish, and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system that cannot be undone.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt) or wherever you ran FRST from. Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

NOTE-1: This fix will run a scan to check that all Microsoft operating system files are valid and not corrupt and attempt to correct any invalid files.

NOTE-2: As part of this fix all temporary files will be removed. If you have any open web pages that have not been bookmarked please make sure you bookmark them now as all open applications will be automatically closed. Also, make sure you know the passwords for all websites as cookies will also be removed.

The following directories are emptied:
 
  • Windows Temp
  • Users Temp folders
  • Edge, IE, FF, Chrome and Opera caches, HTML5 storages, Cookies and History
  • Recently opened files cache
  • Flash Player cache
  • Java cache
  • Steam HTML cache
  • Explorer thumbnail and icon cache
  • BITS transfer queue (qmgr*.dat files)
  • Recycle Bin


Important: items are permanently deleted. They are not moved to quarantine. If you have any questions or concerns please ask before running this fix.

user posted image

The system will be rebooted after the fix has run.

Next,

Run quick scan with Microsoft's Safety Scanner again, post the produced log....

Thank you,

Kevin.

fixlist.txt

Link to post
Share on other sites
AWW7

AWW7

Posted
  • Author
Posted (edited)
On 11/2/2021 at 1:51 AM, kevinf80 said:

Hiya AWW7,

What is the current status of your PC, any remaining issues or concerns... Rogue file was removed with FRST fix....

Run another scan with Malwarebytes please...

Thank you,

Kevin

Hello Kevin

Malwarbytes has reported no threats but two Trojan viruses is still showing up on Windows Defender (logs and screenshots attached)

 

 

 

 

malware log.txt

Edited by AdvancedSetup
images removed per request
Link to post
Share on other sites
AWW7

AWW7

Posted
  • Author
Posted
5 minutes ago, kevinf80 said:

Yep they are ok as they are already in FRST quarantine folder... Any other issues..?

 

No other issues as far I am aware.   Sorry,  I do not follow why these viruses are not an issue if they are still showing on Defender?

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hiya AWW7,

Yes these are the final steps...

Download KpRm by kernel-panik and save it to your desktop.
  • right-click kprm_(version).exe and select Run as Administrator.
  • Read and accept the disclaimer.
  • When the tool opens, ensure all boxes under Actions are checked.
  • Under Delete Quarantines select Delete Now, then click Run.
  • Once complete, click OK.
  • A log will open in Notepad titled kprm-(date).txt.
  • Please attach that file to your next reply.


Next,

1. How to create strong Passwords - https://www.howtogeek.com/195430/how-to-create-a-strong-password-and-remember-it/

2. How to keep all software up to date - PatchMyPC - https://patchmypc.com/home-updater#download

3. Keep your Operating System upto date and current - https://support.microsoft.com/en-us/windows/windows-update-faq-8a903416-6f45-0718-f5c7-375e92dddeb2

4. Answers to Security Questions and Best Pratices - https://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/

5. Malwarebytes Browser Guard (Free) for Firefox: https://addons.mozilla.org/en-GB/firefox/addon/malwarebytes/

6. Malwarebytes Browser Guard (Free) for Chrome: https://chrome.google.com/webstore/detail/malwarebytes-browser-guar/ihcjicgdanjaechkgeegckofjjedodee

Take care and surf safe

Kevin... user posted image
Link to post
Share on other sites
  • Root Admin
AdvancedSetup

AdvancedSetup

Posted
  • Root Admin
Posted

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread. Other members who need assistance please start your own topic in a new thread.

Please review the following to help you better protect your computer and privacy Tips to help protect from infection

Thank you

 

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.