Jump to content
DLinc

Start up Freezes, Same Log issues each scan

Recommended Posts

Every time I start computer, it freezes at password, so can't get in.  I unplugged and restart, hit F2 which brings me to scan hard drive, memory etc...I exit and I am in.....I did a scan with gather logs and have zip file on desktop. Can any of you awesome people help me?

Share this post


Link to post
Share on other sites

Hello @DLinc

Hopefully this is not a hardware issue. We'll go ahead though and scan for any possible malware or obvious issues.

 

Please run the following steps and post back the logs as an attachment when ready.

STEP 01

  • If you're already running Malwarebytes then open Malwarebytes and check for updates. Then click on the Scan tab and select Threat Scan and click on Start Scan button.
  • If you don't have Malwarebytes installed yet please download it from here and install it.
  • Once installed then open Malwarebytes and select Scan and let it run.
  • Once the scan is completed click on the View Report button, then the Export button and save the file as a Text file to your desktop or other location you can find and attach that log on your next reply.
  • If Malwarebytes won't run then please skip to the next step and let me know in your next reply.

STEP 02

Please download AdwCleaner by Malwarebytes and save the file to your Desktop.

  • Right-click on the program and select RunAsAdmin.jpg Run as Administrator to start the tool.
  • Accept the Terms of use.
  • Wait until the database is updated.
  • Click Scan Now.
  • When finished, please click Clean & Repair.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Attach or Copy its content into your next reply.

 

RESTART THE COMPUTER Before running Step 3

STEP 03
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens, click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a checkmark here.
  • Please attach the Additions.txt log to your reply as well.

 

Thanks

Share this post


Link to post
Share on other sites

Please temporarily disable Bitdefender and Exit out of Malwarebytes and run the following fix.

 

Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

fixlist.txt

Thanks

 

Share this post


Link to post
Share on other sites

Gosh I wish I had a name, so I can Thank you so much for your help.  I am not sure if it was done correctly, but it ran through the fix and when it was done, it restarted the computer but didn't leave a new log on the desktop unless you need back the one you just sent. I am attaching that one.... Honestly I truly appreciate your help, it is extremely important for me to keep my computer up and running, trying to get a start up together. Your awesome and much appreciated.

 

Thanks Tons 

Deb

fixlist.txt

Share this post


Link to post
Share on other sites

All good, you're quite welcome

How is the computer running now?

Are you still having any type of freezing or loading issues?

I would recommend you go turn off Sync in Google Chrome and follow the directions from the following topic.

 

 

Share this post


Link to post
Share on other sites

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Thanks

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.