Jump to content

Recommended Posts

this virus appears again and again after every session , please help ,  i scan my laptop everytime and i remove the virus but it keeps comming heelp please

Addition.txt FRST.txt

Share this post


Link to post
Share on other sites
Hello amhaiche97 and welcome to Malwarebytes,

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Protection Scroll to and make sure the following are selected:

    Scan for Rootkits
    Scan within Archives
     
  • Scroll further to Potential Threat Protection make sure the following are set as follows:
    Potentially Unwanted Programs (PUP`s) set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s) set as :- Alwaysdetect PUM`s (recommended)
     
  • Click on the Scan make sure Threat Scan is selected,
  • A Threat Scan will begin.
  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab
  • If asked to restart your computer to complete the removal, please do so
  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open Malwarebytes once more to retrieve the log.


To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


Next,

Please download AdwCleaner by Malwarebytes and save the file to your Desktop. https://downloads.malwarebytes.com/file/adwcleaner
  • Right-click on the program and select Run as Administrator to start the tool.
  • Accept the Terms of use.
  • Wait until the database is ?updated.
  • Click Scan Now.
  • When finished, please click Clean & Repair.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Copy its content into your next reply. ?


Next,

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

https://www.microsoft.com/en-gb/download/malicious-software-removal-tool-details.aspx


Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and Click Finish when the scan is done.


Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log

The log will include log details for each time MSRT has run, we only need the most recent log by date and time....

Let me see those logs in your reply, also let me know if there are any remaining issues or concerns...

Thank you,

Kevin..

fixlist.txt

Share this post


Link to post
Share on other sites
Posted (edited)

Did you follow the instructions in reply #3, can I see the requested logs.

Edited by kevinf80

Share this post


Link to post
Share on other sites

Run the following:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

user posted imageScan with HitmanPro

In any case don't remove on your own anything that Hitman Pro detects! This scanner is really good for checking, it has however been known for deleting files instead of curing them, in some cases this may render the machine unbootable.
Any removals will be done manually after careful analysis of the scan results!

Please download HitmanPro by SurfRight and save it to your desktop.
Temporary disable your AntiVirus and AntiSpyware protection - instructions here.
 
  • Right-click on user posted image icon and select user posted imageRun as Administrator to start the tool.
  • If the program won't run please run it while holding down the left CTRL key until it's loaded!
  • Click on the Next button. You must agree with the terms of EULA (if asked).
  • Check the box beside No, I only want to perform a one-time scan to check this computer.
  • Click on the Next button.
  • The program will start to scan the computer. It would only take several minutes.
  • When the scan is done click Next
  • Click on the “Activate free license” button to begin the free 30 days trial, and remove all the malicious files from your computer.
  • Close Hitman Pro


Navigate to C:\ProgramData\HitmanPro\Logs, open the report and include it it your next reply.
 
  • Click on the Next button.
  • Click on the Save Log button.
  • Save that file to your desktop.


Please include that logfile in your next reply.

Don't forget to re-enable your security!

fixlist.txt

Share this post


Link to post
Share on other sites

Can you post the last two logs from Malwarebytes...

To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the requested scans.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…

Next,

Download Sophos Free Virus Removal Tool and save it to your desktop.

If your security alerts to this scan either accept the alert or turn off your security to allow Sophos to run and complete.....

Please Do Not use your PC whilst the scan is in progress.... This scan is very thorough so may take several hours...
 
  • Double click the icon and select Run
  • Click Next
  • Select I accept the terms in this license agreement, then click Next twice
  • Click Install
  • Click Finish to launch the program
  • Once the virus database has been updated click Start Scanning
  • If any threats are found click Details, then View log file... (bottom left hand corner)
  • Copy and paste the results in your reply
  • Close the Notepad document, close the Threat Details screen, then click Start cleanup
  • Click Exit to close the program
  • If no threats were found please confirm that result....



The Virus Removal Tool scans the following areas of your computer:
  • Memory, including system memory on 32-bit (x86) versions of Windows
  • The Windows registry
  • All local hard drives, fixed and removable
  • Mapped network drives are not scanned.



Note: If threats are found in the computer memory, the scan stops. This is because further scanning could enable the threat to spread. You will be asked to click Start Cleanup to remove the threats before continuing the scan.

Thanks,

Kevin

Share this post


Link to post
Share on other sites

Does this virus return immediately after the system is rebooted after removal...?

Share this post


Link to post
Share on other sites

Sophos appears to have removed the root cause, run Malwarebytes again, see if the issue reappears after reboot.

Open Malwarebytes Anti-Malware.

  • On the Settings tab > Protection Scroll to and make sure the following are selected: Scroll to and make sure the following are selected:


    Scan for Rootkits
    Scan within Archives

  • Scroll further to Potential Threat Protection make sure the following are set as follows:

    Potentially Unwanted Programs (PUP`s)         set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s)  set as :- Alwaysdetect PUM`s (recommended)

  • Click on the Scan make sure Threat Scan is selected,

  • A Threat Scan will begin.

  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab

  • If asked to restart your computer to complete the removal, please do so

  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.

  • Wait for the prompt to restart the computer to appear, then click on Yes.

  • After the restart once you are back at your desktop, open Malwarebytes once more to retrieve the log.

To get the log from Malwarebytes do the following:

  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options: > From export you have two options:

      Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
      Text file (*.txt)        - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
     

  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…

 

Share this post


Link to post
Share on other sites

We are obviously not finding the loader, lets try running FRST via the recovery environment, see if we can get a better fix..

Please download Farbar Recovery Scan Tool from here:

http://www.bleepingcomputer.com/download/farbar-recovery-scan-tool/

save it to a USB flash drive. Ensure to get the correct version for your system, 32 bit or 64 bit

Download and also save to same Flash drive the attached file fixlist.txt (end of reply)

Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Plug the flash drive into the infected PC.

If you are using Windows 8 or 10 consult How to use the Windows 8 or 10 System Recovery Environment Command Prompt Here: http://www.howtogeek.com/126016/three-ways-to-access-the-windows-8-boot-options-menu/ to enter System Recovery Command prompt.
 
  • Select Command Prompt
  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst64 or e:\frst depending on your version. Press Enter Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Fix button.
  • It will make a log (Fixlog.txt) on the flash drive. Please copy and paste it to your reply.

 

Share this post


Link to post
Share on other sites

Ooooppps, gave the wrong instruction, just want a scan to produce a log that we can hopefully produce the fix from...

Please download Farbar Recovery Scan Tool from here:

http://www.bleepingcomputer.com/download/farbar-recovery-scan-tool/

save it to a USB flash drive. Ensure to get the correct version for your system, 32 bit or 64 bit


Note: You need to run the version compatible with your system. If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Plug the flash drive into the infected PC.

If you are using Windows 8 or 10 consult How to use the Windows 8 or 10 System Recovery Environment Command Prompt Here: http://www.howtogeek.com/126016/three-ways-to-access-the-windows-8-boot-options-menu/ to enter System Recovery Command prompt.
 
  • Select Command Prompt
  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst64 or e:\frst depending on your version. Press Enter Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.