Jump to content

Recommended Posts

Hiya there

first off , I am a new user of windows 10 and while using this OS . A problem have been noticing and I’d want to report it to you! just start the laptop and upon windows 10 start to the desktop then MALWAREBYTES wasn’t there (all I can tell is I can see the MB icon on my desktop) and if it won’t be there on the startup program list then I had to launch it from the desktop by just clicking on the "MALWAREBYTES icon" and all fine then ! :)

more is blow :

sometime MALWAREBYTES will startup itself on the startup area  / load it’s services which show in task manager and sometime MALWAREBYTES won’t even to be load itself on the startup area and non of it’s processes are running 

Edited by Gt-truth
Link to post
Share on other sites

  • Staff

***This is an automated reply***

Hi,

Thanks for posting in the Malwarebytes 3 Help forum.

 

If you are having technical issues with our Windows product, please do the following: 

Spoiler

If you haven’t already done so, please run the Malwarebytes Support Tool and then attach the logs in your next reply:

NOTE: The tools and the information obtained is safe and not harmful to your privacy or your computer, please allow the programs to run if blocked by your system.

  • Download Malwarebytes Support Tool
  • Once the file is downloaded, open your Downloads folder/location of the downloaded file
  • Double-click mb-support-X.X.X.XXXX.exe to run the program
    • You may be prompted by User Account Control (UAC) to allow changes to be made to your computer. Click Yes to consent.
  • Place a checkmark next to Accept License Agreement and click Next
  • You will be presented with a page stating, "Welcome to the Malwarebytes Support Tool!"
  • Click the Advanced Options link

    welcome mbst.png
     
  • Click the Gather Logs button

    gatherlogs.png
     
  • A progress bar will appear and the program will proceed to gather troubleshooting information from your computer
  • Upon completion, click OK
  • A file named mbst-grab-results.zip will be saved to your Desktop
  • Please attach the file in your next reply. Before submitting your reply, be sure to enable "Notify me of replies" like so:

     notify me.jpeg  


    Click "Reveal Hidden Contents" below for details on how to attach a file:
     
    Spoiler

    To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.

    mb_attach.jpg.220985d559e943927cbe3c078b
     

One of our experts will be able to assist you shortly.

 

If you are having licensing issues, please do the following: 

Spoiler

For any of these issues:

  • Renewals
  • Refunds (including double billing)
  • Cancellations
  • Update Billing Info
  • Multiple Transactions
  • Consumer Purchases
  • Transaction Receipt

Please contact our support team at https://support.malwarebytes.com/community/consumer/pages/contact-us to get help

If you need help looking up your license details, please head here: https://support.malwarebytes.com/docs/DOC-1264 

 

Thanks in advance for your patience.

-The Malwarebytes Forum Team

Link to post
Share on other sites

Greetings,

Do you have Fast Startup enabled?  The reason I ask is because this feature (available in Windows 8/8.1 and Windows 10) is known to cause issues with some software, including Malwarebytes, which may result in undesirable behavior including failing to launch on startup like it is supposed to.

You can check by following the instructions found on this page.

Link to post
Share on other sites

Disable Fast Startup and then reboot and see if Malwarebytes starts up normally (it should).

The issue is due to the way that Fast Startup works.  It unfortunately keeps a lot of things still loaded into memory like the registry hives and some drivers which means that many of the startup routines that would normally occur during a normal boot don't happen when Fast Startup is enabled, and this includes some of the routines that would trigger Malwarebytes to start so the end result is that you start your computer and Malwarebytes isn't running.  This issue affects many different programs that run at startup, not just Malwarebytes, and I would highly recommend keeping Fast Startup disabled for this reason because it can quite frankly be rather unstable.

Here are a couple more links on the subject that provide additional information:

https://www.windowscentral.com/how-disable-windows-10-fast-startup
https://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/

Link to post
Share on other sites

disabling Fast startup is done and MALWAREBYTES is now start normally and I do not know if this ""fast startup" feature will causing a performance issue which make everything to starts lagging (using web browser and other software which all they starts to be lagging this way) not sure if there anything can I do to it .

On 10/3/2018 at 2:41 PM, exile360 said:

Disable Fast Startup and then reboot and see if Malwarebytes starts up normally (it should).

The issue is due to the way that Fast Startup works.  It unfortunately keeps a lot of things still loaded into memory like the registry hives and some drivers which means that many of the startup routines that would normally occur during a normal boot don't happen when Fast Startup is enabled, and this includes some of the routines that would trigger Malwarebytes to start so the end result is that you start your computer and Malwarebytes isn't running.  This issue affects many different programs that run at startup, not just Malwarebytes, and I would highly recommend keeping Fast Startup disabled for this reason because it can quite frankly be rather unstable.

Here are a couple more links on the subject that provide additional information:

https://www.windowscentral.com/how-disable-windows-10-fast-startup
https://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/

very helpful  information .

Edited by Gt-truth
Link to post
Share on other sites

  • 2 weeks later...

Basically, it's a Windows bug, or to be more accurate, it's the unfortunate result of the poor implementation that was used in creating the Fast Startup feature.  While the idea seems nice, the reality is that it's not a very stable way of speeding up boot times and is prone to causing issues with third party software, services and drivers.

Link to post
Share on other sites

24 minutes ago, exile360 said:

Basically, it's a Windows bug, or to be more accurate, it's the unfortunate result of the poor implementation that was used in creating the Fast Startup feature.  While the idea seems nice, the reality is that it's not a very stable way of speeding up boot times and is prone to causing issues with third party software, services and drivers.

OK , so this is the second windows formats on this new device almost form 2 day ago and I have forget to disable the fast startup this time !  in meantime  , I have to ask you something . 

the question is : if the fast startup is disable by the user ,then this will have something to do with windows performance ? (a new user of window 10 right here :))

EDIT : going to reboot the device right now after I disable the fast startup "

Edited by Gt-truth
Link to post
Share on other sites

You can find out more about Fast Startup on this page including how to disable it.  The issue isn't just that there's a problem with self-protection in Malwarebytes or that the tray may load slower; the problem is that the tray and other components (services, drivers and other startup items) may not start at all or may crash, and that's not only for Malwarebytes, but for pretty much any software installed on your system that runs on boot.  This is because of the way that Fast Startup works by keeping some components in memory while relying on others to start themselves after shutting them down, however many programs (including Malwarebytes) rely on a normal boot order to initiate things and get their processes launched, so if a service is kept in memory but the drivers are not, the service doesn't go through its normal startup process, part of which is to call the drivers to start them, so you end up with no tray because the service didn't go through its normal startup routine of installing/starting the drivers and launching the tray.

You can find out more about how it works, what it does and the pros and cons of Fast Startup at the following links:

https://www.windowscentral.com/how-disable-windows-10-fast-startup
https://www.howtogeek.com/243901/the-pros-and-cons-of-windows-10s-fast-startup-mode/
https://lifehacker.com/shutting-down-windows-10-doesnt-actually-shut-down-wind-1825532376
https://whatsabyte.com/windows/windows-10-fast-startup/

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.