Installed malaware bytes...

[Razured]

I recently installed malwarebytes to remove a virus in my computer that I got from installing a driver installer, once malwarebytes was installed I ran a scan and it made me put the driver agent virus in quaranteen and asked me to reboot and so I did. Once the reboot happened I notice my windows 10 was broken and now I tried everything to reboot my pc to windows 10 factory settings and im unable to do so, or even boot it back to a certain date before. I really dont know what to do anymore.. Help?

[AdvancedSetup]

Hello @Razured and

Can you please open Malwarebytes and go to Reports and find the scan you did and upload that report or, copy/paste the results. Then follow the directions below.

Please run the following steps and post back the logs as an attachment when ready.

STEP 01

• If you're already running Malwarebytes 3 then open Malwarebytes and check for updates. Then click on the Scan tab and select Threat Scan and click on Start Scan button.
• If you don't have Malwarebytes 3 installed yet please download it from here and install it.
• Once installed then open Malwarebytes and check for updates. Then click on the Scan tab and select Threat Scan and click on Start Scan button.
• Once the scan is completed click on the Export Summary button and save the file as a Text file to your desktop or other location you can find, and attach that log on your next reply.
• If Malwarebytes won't run then please skip to the next step and let me know on your next reply.

STEP 02

Please download AdwCleaner by Malwarebytes and save the file to your Desktop.

• Right-click on the program and select Run as Administrator to start the tool.
• Accept the Terms of use.
• Wait until the database is updated.
• Click Scan.
• When finished, please click Clean.
• Your PC should reboot now if any items were found.
• After reboot, a log file will be opened. Copy its content into your next reply.

 

RESTART THE COMPUTER Before running Step 3

STEP 03
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

• Double-click to run it. When the tool opens, click Yes to disclaimer.
• Press the Scan button.
• It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
• The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a check mark here.
• Please attach the Additions.txt log to your reply as well.

 

Thanks

Ron

 

[AdvancedSetup]

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Thanks