Jump to content

Virus/malware prevents Malwarebytes from running , shuts down automatically


Recommended Posts

Hi Malwarebytes team, 

Around 5hours ago, i installed some malicious program by mistake. This lead to a famous feed.sonic virus entering my laptop. So far, I have removed (probably) that program from my laptop and from the browsers. 

 

The problem : Every time my laptop suddenly shuts down, excessive heat near vents at that time. 

I get a BSOD error named "page fault in non paged area" everytime i start my laptop. For this reason I start my laptop in "safe mode". 

Then, inside safe mode I tried running Malwarebytes, and it does not run for more than 2 mins. 

I dont even if i can even reinstall Windows on this laptop now, since I get only 10 mins of on-time with my laptop.

Any help will be appreciated.

Thanks

Link to post
Share on other sites

  • Staff

***This is an automated reply***

Hi,

Thanks for posting in the Malware Removal for Windows Help forum. Being infected is not fun and can be very frustrating to resolve, but don't worry because we have a team of experts here help you!!

Note: Please be patient. When the site is busy it can take up to 48 hours before a malware removal helper can assist you. If no one has replied to your new topic after 48 hours please contact an Administrator to let them know.

First, if you haven't done so, please run a Threat Scan with the latest version of Malwarebytes. This may resolve your malware infection issue without the need for additional support. Click "Reveal Hidden Contents" below for details:

Spoiler

Malwarebytes can detect and remove most malware with no further actions required for free.

If you do not have Malwarebytes, please download it here and install. Be sure to post back the log as shown below.

  1. Open Malwarebytes for Windows
  2. To the left, click Scan > Scan Types.

    auto-reply-scan-types2.jpg.86e24e955a95d
     
  3. Select Threat Scan. Threat Scan is the most thorough and recommended scan method available.

    auto-reply-scan-types1.jpg.f4eee0e0c9375
     
  4. Click Start Scan
     

Next, if you're still experiencing issues after running Malwarebytes, then technical logs will be required to assist you. Click "Reveal Hidden Contents" below and follow the instructions to run the Farbar Recovery Scan Tool:

Spoiler

Don't use any temporary file cleaners unless requested - this can cause data loss and make a recovery difficult.

Please download the Farbar Recovery Scan Tool here and save it to your desktop. Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  1. Double-click to run it. When the tool opens click Yes to the disclaimer.
  2. Press the Scan button.

    _frst_scan.jpg.d79beccbb6e66628e557f6c28
     
  3. It will make a log (FRST.txt) in the same directory the tool is run. Please attach or copy and paste it to your reply.
  4. The first time the tool is run, it also makes another log (Addition.txt). If you've run it before it may not and you may need to select it manually.
     

Finally, attach the Malwarebytes Threat Scan, FRST.txt and Additional.txt logs to your reply. Before submitting your reply, be sure to enable "Notify me of replies" like so:   notify me.jpeg
 

Click "Reveal Hidden Contents" below for details on how to add attachments to your post.
Note: If you are unable to attach files, please copy and past the contents of the requested files in your Reply instead. 

Spoiler

To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.

mb_attach.jpg.220985d559e943927cbe3c078b
 

Please Note the Following:

  • One of our expert helpers will give you one-on-one assistance when one becomes available.
  • Refrain from making any further changes to your computer (such as Install/Uninstall programs, using special fix tools, delete files, edit the registry, etc...) unless advised by a malware removal helper. Doing so can result in system changes which may hinder the attempts by a helper to clean your machine.
  • Do not 'bump' or add a reply to your topic once it is started. Topics which appear to have replies are considered to have a helper assisting them and may be overlooked, resulting in a longer waiting period for help
  • If you're using Peer 2 Peer software such as uTorrent or similar, please completely disable it from running while being assisted here.

Troubleshooting Tips

 

 

Link to post
Share on other sites

Hello ssaraf and welcome to Malwarebytes,

See if you can run the following in Normal mode, if not try from safe mode:

Download Farbar Recovery Scan Tool and save it to your desktop.

Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

Be aware FRST must be run from an account with Administrator status...
 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
    user posted image
     
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Let me see those logs in your reply...

Thank you,

Kevin....
Link to post
Share on other sites

Thanks for those logs ssaraf, continue:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Protection Scroll to and make sure the following are selected:

    Scan for Rootkits
    Scan within Archives
     
  • Scroll further to Potential Threat Protection make sure the following are set as follows:
    Potentially Unwanted Programs (PUP`s) set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s) set as :- Alwaysdetect PUM`s (recommended)
     
  • Click on the Scan make sure Threat Scan is selected,
  • A Threat Scan will begin.
  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab
  • If asked to restart your computer to complete the removal, please do so
  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more to retrieve the log.


To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


Next,

Download AdwCleaner by Malwarebytes onto your Desktop.

Or from this Mirror
 
  • Right-click on AdwCleaner.exe and select user posted imageRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Clean button. This will kill all the active processes
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply


Next,

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

https://www.microsoft.com/en-gb/download/malicious-software-removal-tool-details.aspx


Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and Click Finish when the scan is done.


Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log

The log will include log details for each time MSRT has run, we only need the most recent log by date and time....

Next,

Zip up and attach this folder to your reply C:\Windows\minidump You may have to copy the folder to your desktop and zip up from there...

Let me see those logs in your reply, also tell me if there are any remaining issues or concerns.

Thank you,

Kevin..

fixlist.txt

Edited by kevinf80
Link to post
Share on other sites

Hi Kevin, 

I ran the Farba Fix as you told. Here is the attached fixlog.txt file as requested.

Next I ran adware program. It found 43 infected objects and I cleaned it. But, I could not get the logs (due to the page fault problem as mentioned in my first post).

After that I could not run the malwarebytes program (after serveral installation and uninstallation attempts). Whenever I try to run it, my laptop suddenly shuts down (it was a bit hot also).

Next, I tried to run a portable malware tool named Vipre rescue scanner. This program also could not run more than 2 minutes. Again the system suddenly shut down. (again it was a bit hot).

Then, I thought that the situation is dire, so I made a backup of necessary documents. This copying process took almost 50 minutes, but my system did not shut down unexpectedly this time. (though it was hot).

Next to resolve the page fault error, I tried to run the windows memory diagnostics test. The test ran till 40% in first pass and my system suddenly shut down

Next I did a clean boot of my system using msconfig, disabled all startup programs and Non-microsoft services. The system did start after the clean boot. Next I tried to run malwarebytes again, but again my system suddenly shut down.

As you can see I have tried a lot of things , but no luck so far. :(

Any help would be appreciated.

Thanks

Fixlog.txt

Link to post
Share on other sites

Click on Start > All Programs > Accessories:

Right-click on the Command Prompt entry

Select "Run as Administrator" accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type or copy/paste

CHKDSK /R

hit the Enter key.

You will get a message that the drive cannot be locked, but that the command can be scheduled to run at the next boot - hit the Y key, press Enter, and then reboot.

The CHKDSK may take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run use the following instructions to find the log:

Check Disk report:
 
  • Press the WindowsKey + R on your keyboard at the same time. Type eventvwr into the run box and click OK.
  • In the left panel, expand Windows Logs and then click on Application.
  • Now, on the right side, click on Filter Current Log.
  • Under Event Sources, check only Wininit and click OK.
  • You mayl be presented with one or multiple Wininit logs.
  • Click on an entry corresponding to the date and time of the disk check.
  • On the top main menu, click Action > Copy > Copy Details as Text.
  • Paste the contents into your next reply.

Thanks,

Kevin

Edited by kevinf80
Link to post
Share on other sites

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.