Jump to content
Piqferma

Internet connection has become anormally slow

Recommended Posts

Good afternoon, lately my internet connection started being really slow so I thought it could be caused by a malware, then I decided to install and run Malwarebytes on my PC since Windows Defender didn't help me at all. This problem only occurs temporally, then my connection works normally for a few hours, so I don't think it's about hardware.

Malwarebytes found many threats which I've already deleted, but I'll post its scan log anyway. It solved an issue that made the Google website be slow, but my internet is still failing a lot. Of course, I've been talking to my internet provider company, but they found no issues, and my speed should be 300 Mb/s as it's shown by the speed tests but it's clearly not. Furthermore this is not happening to any other devices connected via Wi-Fi.

At this point I'm totally lost, so I'd be grateful if you could help me. Thank you very much.

(FRST, Addition and Malwarebytes logs are attached)

FRST.txt

Addition.txt

malwarebytesLog.txt

Share this post


Link to post
Share on other sites

***This is an automated reply***

Hi,

Thanks for posting in the Malware Removal for Windows Help forum. Being infected is not fun and can be very frustrating to resolve, but don't worry because we have a team of experts here help you!!

Note: Please be patient. When the site is busy it can take up to 48 hours before a malware removal helper can assist you. If no one has replied to your new topic after 48 hours please contact a Moderator or Administrator to let them know.

 

First, if you haven't done so, please run a Threat Scan with the latest version of Malwarebytes. This may resolve your malware infection issue without the need for additional support. Click "Reveal Hidden Contents" below for details:

Spoiler

Malwarebytes can detect and remove most malware with no further actions required for free.

If you do not have Malwarebytes, please download it here and install. Be sure to post back the log as shown below.

  1. Open Malwarebytes for Windows
  2. To the left, click Scan > Scan Types.
    image.png
  3. Select Threat Scan. Threat Scan is the most thorough and recommended scan method available.
    image.png
  4. Click Start Scan

Next, if you're still experiencing issues after running Malwarebytes, then technical logs will be required to assist you. Click "Reveal Hidden Contents" below and follow the instructions to run the Farbar Recovery Scan Tool:

Spoiler

Don't use any temporary file cleaners unless requested - this can cause data loss and make a recovery difficult.

Please download the Farbar Recovery Scan Tool here and save it to your desktop. Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  1. Double-click to run it. When the tool opens click Yes to the disclaimer.
  2. Press the Scan button.
    _frst_scan.jpg.d10e66dc03e35ede4fdcba12b
  3. It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  4. The first time the tool is run, it also makes another log (Addition.txt). If you've run it before it may not and you may need to select it manually.

Finally, attach the Malwarebytes Threat Scan, FRST.txt and Additional.txt logs to your reply and Follow this topic to get notified when an expert has replied. Click "Reveal Hidden Contents" below for details.

Note: If you are unable to attach files, please copy and past the contents of the requested files in your Reply instead. 

Spoiler

To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.

_mb_attach.jpg.a0465aaafd6cae688aa38ab16

 

After posting your new post, make sure you click the Follow button near the top right of this page, and select the option "An email when new content is posted Change how the notification is sent" so that you're alerted by email when someone has replied to your post.

_mb_follow.jpg.7868cc281f66ac22e919c2c48

_mb_follow_options.jpg.dcb79fc10aa35beb0

Please Note the Following:

  • One of our expert helpers will give you one-on-one assistance when one becomes available.
  • Refrain from making any further changes to your computer (such as Install/Uninstall programs, using special fix tools, delete files, edit the registry, etc...) unless advised by a malware removal helper. Doing so can result in system changes which may hinder the attempts by a helper to clean your machine.
  • Do not 'bump' or add a reply to your topic once it is started. Topics which appear to have replies are considered to have a helper assisting them and may be overlooked, resulting in a longer waiting period for help
  • If you're using Peer 2 Peer software such as uTorrent or similar, please completely disable it from running while being assisted here.

Troubleshooting Tips

Share this post


Link to post
Share on other sites
Hell Piqferma and welcome to Malwarebytes,

Continue with the following:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Protection Scroll to and make sure the following are selected:
    Scan for Rootkits
    Scan within Archives
     
  • Scroll further to Potential Threat Protection make sure the following are set as follows:
    Potentially Unwanted Programs (PUP`s) set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s) set as :- Alwaysdetect PUM`s (recommended)
     
  • Click on the Scan make sure Threat Scan is selected,
  • A Threat Scan will begin.
  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab
  • If asked to restart your computer to complete the removal, please do so
  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more to retrieve the log.


To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


Next,

Download AdwCleaner by Malwarebytes onto your Desktop.

Or from this Mirror
 
  • Right-click on AdwCleaner.exe and select user posted imageRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Clean button. This will kill all the active processes
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply


Next,

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

https://www.microsoft.com/en-gb/download/malicious-software-removal-tool-details.aspx


Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and Click Finish when the scan is done.


Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log

The log will include log details for each time MSRT has run, we only need the most recent log by date and time....

Let me see those logs in your reply, also tell me if there are any remaining issues or concerns...

Thank you,

Kevin..

fixlist.txt

Share this post


Link to post
Share on other sites

Hi Kevin, thank you for your fast response, I think it worked to me. Right after executing FRST and restarting my PC the problem seemed to be solved, and when I scanned again with Malwarebytes it didn't find any threat.

Thank you very much for your help.

Fixlog.txt

Share this post


Link to post
Share on other sites

Yes you had DNS hijacker, we shift that with FRST. Did you run AdwCleaner and MSRT, can I see those logs...?

Share this post


Link to post
Share on other sites

Yes please, those are normal scans to run after DNS hijacker to make sure your system is clean...

Thank you,

Kevin...

Share this post


Link to post
Share on other sites

Thanks for those log, yes is always best to make sure we have your system totally clean. We can clean up now....

Right click on FRST here: C:\Users\Usuario\Downloads\FRST64.exe and rename to uninstall.exe when complete right click on uninstall.exe and select "Run as Administrator"

That action will remove FRST and all created files and folders...

Next,

Read the following links to fully understand PC Security and Best Practices, you may find them useful....

Answers to Common Security Questions and best Practices

Do I need a Registry Cleaner?

Take care and surf safe

Kevin... user posted image

Share this post


Link to post
Share on other sites

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread.

Thanks

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.