Jump to content

MEM:Trojan.Multi.Goppel.gen


Recommended Posts

Hello all,

I am receiving the following issues when do a Kaspersky scan:

05.05.2018 13.21.41 Detected object (file) not processed C:\Windows\System32\drivers\zaaybehl.sys File: C:\Windows\System32\drivers\zaaybehl.sys Object name: HEUR:Trojan.Win32.Adject.gen Object type: Trojan program Time: 5/5/2018 1:21 PM
05.05.2018 13.16.03 Detected object (system memory) not processed System Memory System memory: System Memory Object name: MEM:Trojan.Multi.Goppel.gen Object type: Trojan program Time: 5/5/2018 1:16 PM

Note: I have tried disinfecting using Kaspersky, with restart and without, however that does not work. Also, I am getting a lot of re-directs in my browsers (Chrome, Edge, etc.).

I have attached the logs from a Threat Scan using Malwarebytes, and the two files requested from FRST.

Any assistance would be much appreciated. 

Thank you!

 

Malwarebytes Threat Scan - Initial.txt

Addition.txt

FRST.txt

Link to post
Share on other sites

  • Staff

***This is an automated reply***

Hi,

Thanks for posting in the Malware Removal for Windows Help forum. Being infected is not fun and can be very frustrating to resolve, but don't worry because we have a team of experts here help you!!

Note: Please be patient. When the site is busy it can take up to 48 hours before a malware removal helper can assist you. If no one has replied to your new topic after 48 hours please contact a Moderator or Administrator to let them know.

 

First, if you haven't done so, please run a Threat Scan with the latest version of Malwarebytes. This may resolve your malware infection issue without the need for additional support. Click "Reveal Hidden Contents" below for details:

Spoiler

Malwarebytes can detect and remove most malware with no further actions required for free.

If you do not have Malwarebytes, please download it here and install. Be sure to post back the log as shown below.

  1. Open Malwarebytes for Windows
  2. To the left, click Scan > Scan Types.
    image.png
  3. Select Threat Scan. Threat Scan is the most thorough and recommended scan method available.
    image.png
  4. Click Start Scan

Next, if you're still experiencing issues after running Malwarebytes, then technical logs will be required to assist you. Click "Reveal Hidden Contents" below and follow the instructions to run the Farbar Recovery Scan Tool:

Spoiler

Don't use any temporary file cleaners unless requested - this can cause data loss and make a recovery difficult.

Please download the Farbar Recovery Scan Tool here and save it to your desktop. Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  1. Double-click to run it. When the tool opens click Yes to the disclaimer.
  2. Press the Scan button.
    _frst_scan.jpg.d10e66dc03e35ede4fdcba12b
  3. It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  4. The first time the tool is run, it also makes another log (Addition.txt). If you've run it before it may not and you may need to select it manually.

Finally, attach the Malwarebytes Threat Scan, FRST.txt and Additional.txt logs to your reply and Follow this topic to get notified when an expert has replied. Click "Reveal Hidden Contents" below for details.

Note: If you are unable to attach files, please copy and past the contents of the requested files in your Reply instead. 

Spoiler

To save attachments, please click the link as shown below. You can click and drag the files to this bar or you can click the choose files, then browse to where your files are located, select them and click the Open button.

_mb_attach.jpg.a0465aaafd6cae688aa38ab16

 

After posting your new post, make sure you click the Follow button near the top right of this page, and select the option "An email when new content is posted Change how the notification is sent" so that you're alerted by email when someone has replied to your post.

_mb_follow.jpg.7868cc281f66ac22e919c2c48

_mb_follow_options.jpg.dcb79fc10aa35beb0

Please Note the Following:

  • One of our expert helpers will give you one-on-one assistance when one becomes available.
  • Refrain from making any further changes to your computer (such as Install/Uninstall programs, using special fix tools, delete files, edit the registry, etc...) unless advised by a malware removal helper. Doing so can result in system changes which may hinder the attempts by a helper to clean your machine.
  • Do not 'bump' or add a reply to your topic once it is started. Topics which appear to have replies are considered to have a helper assisting them and may be overlooked, resulting in a longer waiting period for help
  • If you're using Peer 2 Peer software such as uTorrent or similar, please completely disable it from running while being assisted here.

Troubleshooting Tips

Link to post
Share on other sites

  • Root Admin

Hello @RyanMichael and :welcome:

Sorry for the delay. You appear to have the SmartService rootkit. Unless the rootkit is faulty or broken you'll need to remove it using an alternative boot method. Do you have access to another clean computer?

 

If your computer does not have the Windows Recovery Environment installed and available you can use the following method to run the Recovery Environment from a bootable USB disk.

NOTE: This USB disk needs to be created from a clean computer. You cannot use an infected computer for this process

NOTE: An 8GB USB 2.0 stick is required or at least recommended. In some cases a USB 3.0 disk can be used but some computers have issues booting from USB 3.0 disks.

Example drive (no endorsement implied, example only) - This drive example has not been tested by me. It is an older 2015 model with many good reviews though.
Amazon: Kingston 8GB DataTraveler 101 G2 USB 2.0 Flash Drive (DT101G2/8GBZ)
NewEgg: Kingston 8GB DataTraveler 101 G2 USB 2.0 Flash Drive (DT101G2/8GBZ)


STEP 1
Download a Windows 10 ISO image from Microsoft.

Method A: Using the Microsoft Media Creation Tool
https://www.microsoft.com/en-gb/software-download/windows10
Download the Media Creation Tool: https://go.microsoft.com/fwlink/?LinkId=691209

Follow the instructions displayed on the tool to download the Windows 10 ISO image.

In my testing I was not prompted for a license key to download the latest Windows 10 ISO image.
At the time of this writing 2017/12/21 there was only one ISO image offered. Windows 10

32-bit x86  or  64-bit x64

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit
 

Method B: If Method A: above is not working for you then you can try the following method
Microsoft Windows and Office ISO Download Tool (this is not an authorized Microsoft tool, but appears to be legal)
https://www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-and-office-iso-download-tool
Download: https://www.heidoc.net/php/Windows%20ISO%20Downloader.exe

STEP 2
If you were unable to use the Windows Media Creation Tool in STEP 1 to create a USB disk then you can use this tool to burn the Windows 10 ISO image from STEP 1 above.

Download the Windows USB/DVD Download Tool from Gitbub and save to your computer.
English version: https://github.com/mantas-masidlauskas/wudt/raw/master/Downloads/Windows7-USB-DVD-Download-Tool-Installer-en-US.exe

Then install the Windows USB/DVD Download Tool and run it to burn a bootable USB disk from the ISO image. Browse to the location where you saved the Windows 10 ISO image in STEP 1
Note: This tool should work on XP, Vista, Windows 7, or Windows 10 - it is simply used to make a bootable USB disk. Remember, all of this needs to be done on a clean computer.

MCWx4mf.jpg

5IvFX1o.jpg

1hzeggf.jpg

g1iLLSH.jpg

KkzebK6.jpg

 
STEP 3
Please download the Farbar Recovery Scan Tool and save it to your desktop or other location you know where it's saved to. Then copy it to the USB disk you just created.

Note: You need to run the version compatible with your system.
You can check here if you're not sure if your computer is 32-bit or 64-bit

STEP 4
Shut down the infected computer. Do Not insert the USB disk you created until the infected computer has been shut down.
Once the computer is shut down then insert the newly created Windows 10 USB disk into the infected computer and power it back on and press the appropriate key to bring up the boot menu. The link below will help show you which key for various computers manufacturers is used to bring up the boot menu. Most will be either USB or UEFI depending on hardware and settings. If the computer boots up into the Normal Windows instead of the USB stick it may become infected and need to be completely redone again. Make sure you select the correct boot option.

How to Boot Your Computer from a USB Flash Drive

STEP 5
Once the computer starts to boot up from the USB disk, follow the screens and directions below.

Gvt31DC.jpg

wk8hs0E.jpg

F2gCAoF.jpg

X8NEEvb.jpg

You will need to open NOTEPAD.EXE to help find out which drive is your Windows drive and which drive is your USB disk drive you just created

O27kz3e.jpg

RRI6og4.jpg

For the more advanced user you could also use DISKPART to help locate which drive is mapped to your USB disk. In most cases the USB disk will be either D: or E: but depending on hardware the drive could be a much higher level such as H: or higher.

Example only - your hardware will look different

DISKPART> list volume
	  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0     Z                       DVD-ROM         0 B  No Media
  Volume 1     C                NTFS   Partition    931 GB  Healthy    System
  Volume 2     Q   SEA-USB-4.0  NTFS   Partition   3725 GB  Healthy
  Volume 3     D                NTFS   Removable   7636 MB  Healthy


Go back to the DOS Command Prompt (if you used DISKPART type in Exit and press the Enter key) and type in the following and press the Enter key.

CD /D  D: (or E: or whichever drive letter the USB stick is on)

Then type in CD\
and press the Enter key to get to the root or top of the USB disk.

Then type in FRST   or   FRST64  (depending on which version your computer uses) and click the Scan button.

A log called FRST.txt will be saved on your USB Flash Drive. Attach it in your next reply.

If all went well you should now be able to boot into Normal Mode and run Malwarebytes and run a Threat Scan to have it finish the removal process.

 

Link to post
Share on other sites

  • Root Admin

Yes, please boot into Windows Normal Mode and run the following

 

Please run the following steps and post back the logs as an attachment when ready.

STEP 01

  • If you're already running Malwarebytes 3 then open Malwarebytes and check for updates. Then click on the Scan tab and select Threat Scan and click on Start Scan button.
  • If you don't have Malwarebytes 3 installed yet please download it from here and install it.
  • Once installed then open Malwarebytes and check for updates. Then click on the Scan tab and select Threat Scan and click on Start Scan button.
  • Once the scan is completed click on the Export Summary button and save the file as a Text file to your desktop or other location you can find, and attach that log on your next reply.
  • If Malwarebytes won't run then please skip to the next step and let me know on your next reply.

STEP 02

Please download AdwCleaner by Malwarebytes and save the file to your Desktop.

  • Right-click on the program and select RunAsAdmin.jpg Run as Administrator to start the tool.
  • Accept the Terms of use.
  • Wait until the database is updated.
  • Click Scan.
  • When finished, please click Clean.
  • Your PC should reboot now if any items were found.
  • After reboot, a log file will be opened. Copy its content into your next reply.

 

RESTART THE COMPUTER Before running Step 3

STEP 03
Please download the Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit

  • Double-click to run it. When the tool opens, click Yes to disclaimer.
  • Press the Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it also makes another log (Addition.txt). If you've, run the tool before you need to place a check mark here.
  • Please attach the Additions.txt log to your reply as well.

 

Thanks

Ron

 

Link to post
Share on other sites

  • Root Admin

Overall looks pretty good.

Please run the following fix from Normal Mode

Please download the attached fixlist.txt file and save it to the Desktop.
NOTE. It's important that both files, FRST or FRST64 and fixlist.txt are in the same location or the fix will not work.

NOTICE: This script was written specifically for this user, for use on this particular machine. Running this on another machine may cause damage to your operating system.

Run FRST or FRST64 and press the Fix button just once and wait.
If the tool needs a restart please make sure you let the system restart normally and let the tool complete its run after restart.
The tool will make a log on the Desktop (Fixlog.txt). Please attach or post it to your next reply.

Note: If the tool warned you about an outdated version please download and run the updated version.

fixlist.txt

Thanks

Ron

 

Link to post
Share on other sites

  • 2 weeks later...
  • Root Admin

Glad we could help.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this thread.Other members who need assistance please start your own topic in a new thread.

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.