Jump to content

Stuck at repair mbamswissarmy.sys


Recommended Posts

Hello Awes0me and welcome to Malwarebytes,

Save the attached file fixlist.txt to your flash drive, same place as FRST.
Now please enter System Recovery Options as you did to get the log.

Run FRST and press the Fix button just once and wait.
The tool will make a log on the flashdrive (Fixlog.txt) please post it to your reply.

Next,

See if your system will boot normally, if your system boots ok continue:

Totally Remove Malwarebytes from your system:

Download the latest version of MB-Clean by clicking this link: https://downloads.malwarebytes.com/file/mb_clean save to your Desktop, or a folder of your choice.
 
  • Close all open applications
  • Double-click and run mb-clean.exe
  • A prompt with an option to clean up the system will appear:


Yes - will proceed with backing up the license key (Malwarebytes 3.x only) and initiating the cleanup process. (Recommended)
No - will exit the utility

Once the cleanup process is completed, a prompt will appear:

Yes – will proceed and post reboot you will be prompted to continue with the downloading, installation and activation of latest version of Malwarebytes 3.x (Recommended)
No – will exit the utility and you will not be prompted (post reboot) to download, reinstall and re-activate (Not Recommended)

We recommend rebooting immediately. Additionally, stopping at this step is not recommended and will most likely not resolve your issue(s).

Upon reboot, a prompt will appear:

Yes - will download, install and activate the latest version of Malwarebytes 3.x (Recommended)
No - will exit the utility and the cleanup process is complete...

A log file ("mb-clean-results.txt") will be on your desktop

Next,

Open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Protection Scroll to and make sure the following are selected:
    Scan for Rootkits
    Scan within Archives
     
  • Scroll further to Potential Threat Protection make sure the following are set as follows:
    Potentially Unwanted Programs (PUP`s) set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s) set as :- Alwaysdetect PUM`s (recommended)
     
  • Click on the Scan make sure Threat Scan is selected,
  • A Threat Scan will begin.
  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab
  • If asked to restart your computer to complete the removal, please do so
  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more to retrieve the log.


To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply

     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…


Next,

Download Farbar Recovery Scan Tool and save it to your desktop.

Alternative download option: http://www.techspot.com/downloads/6731-farbar-recovery-scan-tool.html

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

If your security alerts to FRST either, accept the alert or turn your security off to allow FRST to run. It is not malicious or infected in any way...

Be aware FRST must be run from an account with Administrator status...
 
  • Double-click to run it. When the tool opens click Yes to disclaimer.(Windows 8/10 users will be prompted about Windows SmartScreen protection - click More information and Run.)
  • Make sure Addition.txt is checkmarked under "Optional scans"
    user posted image
     
  • Press Scan button to run the tool....
  • It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
  • The tool will also make a log named (Addition.txt) Please attach that log to your reply.


Let me see those logs in your reply. Do not post links to websites for the logs, either copy/paste direct or attach to your reply..

Thank you,

Kevin..

 

fixlist.txt

Link to post
Share on other sites

Due to the lack of feedback, this topic is closed to prevent others from posting here.

If you need this topic reopened, please send a Private Message to any one of the moderating team members. Please include a link to this topic with your request.

This applies only to the originator of this topic. Other members who need assistance please start your own topic in a new thread.

Thanks

 

Link to post
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.