Jump to content

Help Please

markkilbourne70
 Share

Recommended Posts

markkilbourne70

markkilbourne70

Posted
Posted

I think I have some malware on my computer, I lose administrator privilege to files, sometimes other network adapters show up and  i have had other devices show up on my network. I have tried different scans and nothing shows up. Also, many devices show they have migrated to my computer and I dont undrstand it at all Any help with this would be greatly appreciated and I have attached the scans for you.

FRST.txt

malwarebytesresults.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Thanks for those logs, continue with the following:

Download attached fixlist.txt file (end of reply) and save it to the Desktop, or the folder you saved FRST into. "Do not open that file when running FRST fix"
NOTE. It's important that both FRST and fixlist.txt are in the same location or the fix will not work.

Open FRST and press the Fix button just once and wait.
The tool will make a log on the Desktop (Fixlog.txt) or the folder it was ran from. Please post it to your reply.

Next,

Please download Zemana AntiMalware and save it to your Desktop.
 
  • Install the program and once the installation is complete it will start automatically.
  • Without changing any options, press Scan to begin.
  • After the short scan is finished, if threats are detected press Next to remove them.
    Note: If restart is required to finish the cleaning process, you should click Reboot. If reboot isn't required, please re-boot your computer manually.
     
  • Open Zemana AntiMalware again.
  • Click on user posted image icon and double click the latest report.
  • Now click File > Save As and choose your Desktop before pressing Save.
  • Attach saved report in your next message.


Next,

Download AdwCleaner by Malwarebytes onto your Desktop.

Or from this Mirror
 
  • Right-click on AdwCleaner.exe and select user posted imageRun as Administrator (for Windows Vista, 7, 8, 8.1 and 10 users)
  • Accept the EULA (I accept), then click on Scan
  • Let the scan complete. Once it's done, make sure that every item listed in the different tabs is checked and click on the Clean button. This will kill all the active processes
  • Once the cleaning process is complete, AdwCleaner will ask to restart your computer, do it
  • After the restart, a log will open when logging in. Please copy/paste the content of that log in your next reply


Next,

Download Microsoft's " Malicious Software Removal Tool" and save direct to the desktop

Ensure to get the correct version for your system....

https://www.microsoft.com/en-gb/download/malicious-software-removal-tool-details.aspx


Right click on the Tool, select “Run as Administrator” the tool will expand to the options Window
In the "Scan Type" window, select Quick Scan
Perform a scan and Click Finish when the scan is done.


Retrieve the MSRT log as follows, and post it in your next reply:

1) Select the Windows key and R key together to open the "Run" function
2) Type or Copy/Paste the following command to the "Run Line" and Press Enter:

notepad c:\windows\debug\mrt.log

The log will include log details for each time MSRT has run, we only need the most recent log by date and time....

Let me see those logs in your reply, also tell me if there are any remaining issues or concerns....

Thank you,

Kevin...

fixlist.txt

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

I`ve just read your PM, I assume your internet back online...? You`ve posted the wrong logs.

fixlist.txt is what I posted for you to use with FRST fix, I want to see the produced log "fixlog.txt"

FRST.txt is the primary log from the first time you ran FRST...

The last log you`ve posted is the secondary log "addition.txt" from first run of FRST...

fixlog.txt should be saved here: C:\FRST\Logs

To get the log from Zemana do this:
  • Open Zemana AntiMalware again.
  • Click on user posted image icon and double click the latest report.
  • Now click File > Save As and choose your Desktop before pressing Save.
  • Attach saved report in your next message.

Also what is happening with your system presently. Any odd or erratic behavior, same for your default browser...

Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

yes that is the correct log. Can you also post the log from Zemana..

To get the log from Zemana do this:
 
  • Open Zemana AntiMalware again.
  • Click on user posted image icon and double click the latest report.
  • Now click File > Save As and choose your Desktop before pressing Save.
  • Attach saved report in your next message.
Link to post
Share on other sites
kevinf80

kevinf80

Posted
Posted

Hiya Mark,

The file ct is nothing to be concerned about, belongs to FRST, you cannot open or do anything with it.. Is your system behaving as expected, any remaining issues or concerns..?

Run another scan with Malwarebytes as follows:

Open Malwarebytes Anti-Malware.
 
  • On the Settings tab > Protection Scroll to and make sure the following are selected:
    Scan for Rootkits
    Scan within Archives
     
  • Scroll further to Potential Threat Protection make sure the following are set as follows:
    Potentially Unwanted Programs (PUP`s) set as :- Always detect PUP`s (recommended)
    Potentially Unwanted Modifications (PUM`s) set as :- Alwaysdetect PUM`s (recommended)
     
  • Click on the Scan make sure Threat Scan is selected,
  • A Threat Scan will begin.
  • When the scan is complete if anything is found make sure that the first checkbox at the top is checked (that will automatically check all detected items), then click on the Quarantine Selected Tab
  • If asked to restart your computer to complete the removal, please do so
  • When complete click on Export Summary after deletion (bottom-left corner) and select Copy to Clipboard.
  • Wait for the prompt to restart the computer to appear, then click on Yes.
  • After the restart once you are back at your desktop, open MBAM once more to retrieve the log.


To get the log from Malwarebytes do the following:
 
  • Click on the Reports tab > from main interface.
  • Double click on the Scan log which shows the Date and time of the scan just performed.
  • Click Export > From export you have two options:
    Copy to Clipboard - if seleted right click to your reply and select "Paste" log will be pasted to your reply
    Text file (*.txt) - if selected you will have to name the file and save to a place of choice, recommend "Desktop" then attach to reply
     
  • Use "Copy to Clipboard, then Right click to your reply > select "Paste" that will copy the log to your reply…

Thank you,

Kevin

 

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.