Jump to content

Web protection keeps turning off


Recommended Posts

4 minutes ago, xrobo555 said:

I have tried literally everything from restarting my computer to running it as admin and it still won't turn on

 

Let's try and get some logs first so the team can review them and see if they can tell what may be causing your issues.... Please use an Administrator account when doing the following,

  1. FIRST: Create and obtain Farbar Recovery Scan Tool (FRST) logs
  2. Download FRST and save it to your desktop. Tell any program that blocks it to ignore or allow. It IS SAFE. It contains no info that can identify or harm you.
  3. NOTE: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit
  4. Double-click to run FRST and when the tool opens click "Yes" to the disclaimer
  5. Press the "Scan" button
  6. This will produce two files in the same location (directory) as FRST: FRST.txt and Addition.txt
    NOTE: These two files will be collected by the MB-Check Tool and added to the zip file for you
  7. NEXT: Create and obtain an mb-check log
  8. Download MB-Check and save to your desktop
  9. Double-click to run MB-Check and within a few second the command window will open, then click "OK"
  10. This will produce one log file on your desktop: mb-check-results.zip
  11. Attach this file to your forum post by clicking on the "Drag files here to attach, or choose files..." or simply drag the file to the attachment area

 

Link to post
Share on other sites

On 1/31/2018 at 6:47 AM, xrobo555 said:

I have tried literally everything from restarting my computer to running it as admin and it still won't turn on

 

28 minutes ago, xrobo555 said:

There you go

mwb1.txt

Please re-read my instructions. You did not post the needed logs.

Let's try and get some logs first so the team can review them and see if they can tell what may be causing your issues.... Please use an Administrator account when doing the following,

  1. FIRST: Create and obtain Farbar Recovery Scan Tool (FRST) logs
  2. Download FRST and save it to your desktop. Tell any program that blocks it to ignore or allow. It IS SAFE. It contains no info that can identify or harm you.
  3. NOTE: You need to run the version compatible with your system. You can check here if you're not sure if your computer is 32-bit or 64-bit
  4. Double-click to run FRST and when the tool opens click "Yes" to the disclaimer
  5. Press the "Scan" button
  6. This will produce two files in the same location (directory) as FRST: FRST.txt and Addition.txt
    NOTE: These two files will be collected by the MB-Check Tool and added to the zip file for you
  7. NEXT: Create and obtain an mb-check log
  8. Download MB-Check and save to your desktop
  9. Double-click to run MB-Check and within a few second the command window will open, then click "OK"
  10. This will produce one log file on your desktop: mb-check-results.zip
  11. Attach this file to your forum post by clicking on the "Drag files here to attach, or choose files..." or simply drag the file to the attachment area

 

Link to post
Share on other sites

  • 3 weeks later...
19 minutes ago, xrobo555 said:
Quote

C:\Program Files\Malwarebytes\Anti-Malware\mbam.exe    REG_SZ        ~ RUNASADMIN

 

Go to the folder C:\Program Files\Malwarebytes\Anti-Malware\
Find the file mbam.exe and right click on it and choose Properties
In the window that pops up click on Compatibility Tab
Remove ALL checkmarks. Malwarebytes has issues when you change these settings,

 Next, Let us get a clean install of the current version.

Download and run MB-CLEAN

  • Download MB-CLEAN
  • Close all open applications
  • Double-click and run mb-clean-3.1.0.1031.exe
  • A prompt with an option to clean up the system will appear: click Yes
    • Yes - will proceed with backing up the license key (Malwarebytes 3.x only) and initiating the cleanup process
  • Once the cleanup process is completed, a prompt will appear:
    • Yes - will proceed and post reboot you will be prompted to continue with the downloading, installation and activation of latest version of Malwarebytes 3
    • No - will exit the utility and you will not be prompted (post reboot) to download, reinstall and re-activate (not recommended)
      • We recommend rebooting immediately. Additionally, stopping at this step is not recommended and will most likely not resolve your issue(s).
  • Upon reboot, a prompt will appear: click Yes
    • Yes - will download, install and activate the latest version of Malwarebytes 3
    • No - will exit the utility and Malwarebytes 3 will not be downloaded, reinstalled or re-activated (not recommended)

 If it does not offer the new install after the reboot you can download and install from here. 

https://downloads.malwarebytes.org/file/mb3  

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
Back to top
×
×
  • Create New...

Important Information

This site uses cookies - We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.